|
Construction Equipment If it digs, pushes, hauls dirt "off road" post it here. |
|
Thread Tools | Display Modes |
#101
|
||||
|
||||
Re: 777 HAUL TRUCK (1/12 size)
Cheater...??? ( well maybe.....being able to use the "magic printer" does help!!)
You ever need something let me know.... KP |
#102
|
||||
|
||||
Re: 777 HAUL TRUCK (1/12 size)
Wow, you've made some great progress on the 777. I like the detail you've been putting into the truck. The handrails and ladders look really good. The 5 gallon bucket really helps put things into perspective, on it's shear size. No doubt it will be a very well built, and heavy model. Nice work!
__________________
Nathan |
#103
|
||||
|
||||
Re: 777 HAUL TRUCK (1/12 size)
Quote:
|
#104
|
||||
|
||||
Re: 777 HAUL TRUCK (1/12 size)
|
#105
|
||||
|
||||
Re: 777 HAUL TRUCK (1/12 size)
That's nice! Details always sell the appearance of a model. Are you planning on welding all the super structure components together? I can see some tack welds here and there, and some screws in other places. I would think a lot of the tack welds are probably strong enough for the components that won't be stressed, like the cab, fenders, ect. A little body filler to smooth the joints over, and it would be ready for paint. I wish I was a little better at tig welding. I do all right with SMAC welding. Not to much experience with tig.
__________________
Nathan |
#106
|
||||
|
||||
Re: 777 HAUL TRUCK (1/12 size)
First attempt at the small deck/walkway beside the cab and the hand railing. Something about this just isn't right....think the walk way is too wide, trying to build this all without a scale model to use as a reference or blue prints is tricky, looking at 1:1 picture can only help so much, and many picture are not at the proper angle to get a good reference from...fun fun....very frustating at times!!! More time is spent looking at what has been added and trying to figure out why it doesn't seem to look right....or maybe it's a combination of a number of things that aren't right which make finding the problem a total DRAG !!! I must say...my hat's off to the scale builders!!!! Hope you don't mind my simple not so scale like build....learning all the time!!!
[IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] |
#107
|
||||
|
||||
Re: 777 HAUL TRUCK (1/12 size)
Quote:
All the parts you see that have been bent are done by leaving a small amount of material in place, just enough to hold it together and make it easy to bend by hand, all these areas will end up getting a full weld. They will be mig welded (.023" solid wire) "down hand" to help reduce the amount of heat and avoid to much warping...Tig would be much better...my Tig welding skills are low...scratch that...more like zero !!! Just one more thing to learn when I grow up!!! |
#108
|
|||
|
|||
Re: 777 HAUL TRUCK (1/12 size)
A BIG WOW===it is looking good.
I see a valve stem. Are the rims 4 in dia with tube type tires? Ken |
#109
|
||||
|
||||
Re: 777 HAUL TRUCK (1/12 size)
Are you kidding me? That walkway and railing along side the cab looks awesome! I'd say it's quite scale looking, but then I do not have a 1:1 photo to compare it to. One benefit to using steel for all this is that it's more durable. Clamping up aluminum parts with vise grips would definitely mar the finish of the surface. Plus like you said, it's easier to weld.
__________________
Nathan |
#110
|
||||
|
||||
Re: 777 HAUL TRUCK (1/12 size)
Quote:
Thanks!!! Yup , I see it too.......I have this rim on the wrong way OOPS...LOL...valve stem should be on the inside, and yes the rims are 4" with tubes.... http://www.princessauto.com/pal/en/S...mbly/8442410.p |
#111
|
||||
|
||||
Re: 777 HAUL TRUCK (1/12 size)
Quote:
Using steel does have it's advantages...but you pay a price for the added weight!!! A truck like this is meant to carry a big load..not be a big load..LOL |
#112
|
|||
|
|||
Re: 777 HAUL TRUCK (1/12 size)
I drive real 777D's at work and the walkway looks right on. On the real thing the walkway looks large until you try and squeeze my butt on it then it gets pretty crowded.
Awesome build by the way. |
#113
|
||||
|
||||
Re: 777 HAUL TRUCK (1/12 size)
Quote:
Glad you like my attemt at building this truck....any pics and or suggestions on this build will be helpful and very much appreciated!!!! KP |
#114
|
||||
|
||||
Re: 777 HAUL TRUCK (1/12 size)
|
#115
|
||||
|
||||
Re: 777 HAUL TRUCK (1/12 size)
You're a building machine my friend! Kind of reminds me of someone else I know...You don't sleep much either do you?
Your truck is looking awesome! I'd love to perch my Volvo onto a pile next to it and load it up! Oh, be careful offering to cut out some pieces for me...I may just take you up on it!lol |
#116
|
||||
|
||||
Re: 777 HAUL TRUCK (1/12 size)
Quote:
The offer to cut you some parts still stands...however...just after I hit the "submit reply" button I thought about what I may have got myself into and the possible long list of "goodies" you would most likely ask for.....I'm actually kinda surprised you didn't???...yet...LOL...thought for sure I set myself up on that one!!! (Really if you want/need something send me an e-mail with dimensions etc ,I would be more than willing to help with a future project.....providing it's not a full blown build!!!! ) ) |
#117
|
||||
|
||||
Re: 777 HAUL TRUCK (1/12 size)
Have you seen the trailer toting version? http://cmpeng.com.au/page/MAJOR_PROJ...ow_Loader.html
I'm guessing you have already seen this page? https://www.google.com/search?q=cat+...w=1024&bih=612 Keep it up! Cheer's, Neil. |
#118
|
||||
|
||||
Re: 777 HAUL TRUCK (1/12 size)
Quote:
If I did build another 777 c/w trailer I would also consider this bottom dump trailer idea as well...just something different...but again one thing at a time, funny how working for a living always gets in the way of the fun stuff!! [IMG][/IMG] |
#119
|
|||
|
|||
Re: 777 HAUL TRUCK (1/12 size)
Hello you are doing a great job the walk ways and rails look awesome. You are moving right along there no mold growing on you. Keep up the good work. Ed
|
#120
|
|||
|
|||
Re: 777 HAUL TRUCK (1/12 size)
We are not allowed to have camera at work (get caught with one and you are probably going to lose your job). I will see if I can get some dimensions when I go back to work (work 7 on/7 off) but 18inches sounds about right.
if you are around the Edmonton area you could see these guys http://www.heavymetalequipment.ca/Home.aspx they rent them. Or just get them to deliver one to you and take some measurements, its only $32,000 a month plus delivery. Last edited by porky69; 12-29-2013 at 05:13 PM. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|