atlus like excavtor

[mcCracken15]

I would almost bet you will be making your own track frames. just start with aluminum square tube and go from their. that way the center of your track frame will be aluminum where the turntable mounts and it wont flex and bend. mine was thin aluminum in thr beggining and i didn't even have much their of to much weight and it was already to flexible. but everything on my ex has been rebuilt atleast twice only improving they way i think and build evry time. thats the funnest part forvme anyways. i like what you have so far and i hope to see lots of pics and ideas

[cosworth34677]

Originally Posted by mcCracken15

I would almost bet you will be making your own track frames. just start with aluminum square tube and go from their. that way the center of your track frame will be aluminum where the turntable mounts and it wont flex and bend. mine was thin aluminum in thr beggining and i didn't even have much their of to much weight and it was already to flexible. but everything on my ex has been rebuilt atleast twice only improving they way i think and build evry time. thats the funnest part forvme anyways. i like what you have so far and i hope to see lots of pics and ideas

well i got some tracks for vex i orederd a while ago for a crane that never happened i did cut the frame parts, just got to weld them together. i got to go in to work to pick up something in the morning so i may zap that together

[mcCracken15]

I just thought id say take a look at rc loggers posting. he shows a lot if good ideas budt the one i like most is the turn table he uses which i bought my self. it holds up tp 200 pounds side to side and uses a 1/4 scale servo and an aluminum and a brass gear should. just a thought