|
Truck Building Tech Covers mechanical and electrical components for truck modeling |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Scale Art Parts
Here are some parts I got from Scale Art, hoist and pump, relay 2 cable locking rear ends and 2 SMX sound modulars. The rears are for the tractor for the dump trailer and hoist,pump and relay are for the tri axle Mack I am going to do. The sound modulars are for the equipment. Thought you might be iterated to see the hoist and rears and pump. I would be very happy to answer ay question about these parts if you have any. Click on picture and it will take you photo bucket and you can click away. Ed
|
#2
|
||||
|
||||
Re: Scale Art Parts
Where do you buy scale art parts from?
|
#3
|
||||
|
||||
Re: Scale Art Parts
hey ed how much did the ram and pump set you back
|
#4
|
|||
|
|||
Re: Scale Art Parts
BRICKNICK I got the parts direct from Scale Art. Ed Trucker n The hoist cost me 320.12 Euro regular price 336.97 Euro and the pump cost me 237.90 Euro regular price 250.42 Euro and that is 558.02 Euro or $714.27 US The regular price is 587.39 Euro or $869.25 US at todays exchange rate of 1.48 I had money in Germany at a rate of 1.28 that was why my cost was cheaper. Ed
|
#5
|
|||
|
|||
Re: Scale Art Parts
scale art is top of the line parts
|
#6
|
|||
|
|||
Re: Scale Art Parts
How do you contact them ? I've emailed them many times and no answer nothing ? thanks,mike
|
#7
|
|||
|
|||
Re: Scale Art Parts
Mike I just get on the phone and call them. There phone number is 011 49 6236 4166 51 there is a 6 hour difference, they are ahead of us. Ed
|
#8
|
|||
|
|||
Re: Scale Art Parts
Quote:
|
#9
|
|||
|
|||
Re: Scale Art Parts
It will be interesting to see how I go with a couple of parts ordered directly from their shop... Just a Fuel tank and a couple of other bits...
Cheers, AP |
#10
|
||||
|
||||
Re: Scale Art Parts
Ed I'm seriously thinking about changing out my Osswald suspension and Ruest axles on my Wedico Peterbilt to Scale Art suspension and locking diffs. Are you happy with your diffs? Have you worked out a way to mount your servo?
Thanks. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|