Morpower 3 way valve

[gauthib12]

Thanks Ed, I researched different oils and read that 10w was light and that it is also used as a hydraulic substitute, never considered additives and such...what Cat oil do you use? Weight?....the valve seemed to work but not well and being the over inquisitive sort I took it apart...maaaybe it was defective from the start...I can say that both outer valves fit the hole close, the center seems to have wiggle room no matter which valve is fitted...I don't know... Must be the valve fit and the oil is just flooding in the area and exiting both ports...nonetheless frustrating !!