NorthEast Logging Co.

[Trucking4u]

So I have decided to start a "Construction" Company thread. I will mostly be doing logging and the such, but may include a little dirtwork. The Truck build, that I have no pictures of yet
It will be a Kenworth T800W Daycab with a log trailer
I also am starting a conversion of a Nylint Ford LTL9000 dump truck.
I hope to have some pictures soon guys!



Jon in Vt.
The Northern Rednecker

[Trucking4u]

So, I am having a problem. My iPad will not post pictures using the post image button in the reply section. Is it possible to use [img] url [/img] to post pictures, or must I use the Post Image Button.

Any help at all will be much appreciated.

Jon in Vt
The Northern Rednecker

[Trucking4u]

Here is a test of picture

The Idea

[img] [/img]


Jon in Vt.
The Northern Rednecker

[Trucking4u]

Haha! It works!

Jon in Vt.
The Northern Rednecker

[Trucking4u]

So, as promised, here is a picture of the semi-complete (no pun) truck. It Will be a Kenworth T800w, daycab, with a heavy front end, pretty much a heavy hauler. The Frame is Integy 455mm frame rails, with 3d printed crossmembers, a 3d printed front axle, suspension, and wheels. The first attempt at the T800w hood is seen at the left, without fenders. But enough talk, I'll show you a picture.

[img] [/img]


Jon in Vt.
The Northern Rednecker

[skeeter]

SWEET!

[Trucking4u]

Originally Posted by skeeter

SWEET!

Skeeter, sir, thank you. You have been a huge inspiration for me to even bother starting my own thread. So thank you!



Jon in Vt.
The Northern Rednecker

[Trucking4u]

So I tore apart a differential that I built, from 3D printed gears, then I found that a input gear was broke.

[img] [/img]

Then I took a look at the LTL9000, the wackjob who operated it before me, he was hard on it. When I swept it up, the grill, bumper, and beacons were smashed off.

[img] picture share [/img]

I already pulled the axles out.

The guys at the shop decided to build a race truck, so this is what I deal with now :facepalm:

[img] [/img]

Thank you for reading!

Jon in Vt.
The Northern Rednecker

[Trucking4u]

So I haven't made a lot of progress today. I assembled the rear differential, which has all custom 3D printed gears. I am anxious to see how they hold up under a load. I also planned a suspension for this truck. It will resemble a Hendrickson walking beam suspension, which I have seen RCP57 make a few of.

No pictures today, sorry guys


I also wanted to give a shout out to all of the members on here who have inspired me to start a RC semi build. The $#!+ you guys do is really inspirational!

So this one is for RCP57, Skeeter, Cooper, Lil Giants, Frizzen, and Egronvold.
You guys are awesome!


Jon in Vt.
The Northern Rednecker

[skeeter]

Thank-you sir fo rht ehonorable mention, I'm humbled. Everythign I do is just for fun. There are others here that build way better things than do I

[frizzen]

Welcome aboard Trucking,
It'll be interesting to see how the 3d printed gears hold up. I know cast nylon can chew itself up with too much torque and traction. A motor that size looks pretty hungry in an offroad logger truck. The 3d parts on that integy frame look great.

Looks like the highway dept really beat on your old ford dump truck! Hope they paid ya to haul it off their lot. (Mmmm, unloved crusty abused steel) Or maybe just knock off the sticker schmoo and print a new grille.

Wait a second, i'm being called out on here about being a positive influence? If i deserve a place in that standing, it's by standing on the shoulders of real giants.

[egronvold]

Originally Posted by Trucking4u

So I haven't made a lot of progress today. I assembled the rear differential, which has all custom 3D printed gears. I am anxious to see how they hold up under a load. I also planned a suspension for this truck. It will resemble a Hendrickson walking beam suspension, which I have seen RCP57 make a few of.

No pictures today, sorry guys


I also wanted to give a shout out to all of the members on here who have inspired me to start a RC semi build. The $#!+ you guys do is really inspirational!

So this one is for RCP57, Skeeter, Cooper, Lil Giants, Frizzen, and Egronvold.
You guys are awesome!


Jon in Vt.
The Northern Rednecker

Thank you

[Trucking4u]

Skeet, Frizzy, and Egrovnold, you guys are welcome

Frizzen, the motor is a 25t size 380 out of a ECX Torment 1/18 scale, I might replace it soon, but I can't right now, money is tight. What motor would you recommend?

As for the ltl, I am gonna do a belt drive system, from a forum I saw over on Scale 4x4 RC.
But that isn't my first worry

Jon in Vt.
The Northern Rednecker

[frizzen]

Oh, my bad i thought it was a brushed 540/550 size like the tamiya semis use. Plastic parts might last a while behind that one then. Driving style also plays a big part, but I'd still probably try to keep spare diff gears on hand, or see if there's a donor somewhere with similar gear dimentions.

[Trucking4u]

Special unveiling later.

It's bigger, it's badder, it's got no pictures taken of it yet, or I might have unveiled it now


Jon in Vt.
The Northern Rednecker

[Trucking4u]

The special unveiling is now folks

The second attempt 3D printed Kenworth T800W. Complete with Frenchie Grill (Thanks Dad!)

[img] [/img]


This hood, minus top or fenders, took 6 hours to print! I do not run my 3d printer at night, as I have no want for anything to mess up while I am asleep.

The fenders will be 3D printed, and the top will most likely be made of styrene.

Thanks for reading!


Jon in Vt.
The Northern Rednecker

[Trucking4u]

So, not much going on around here.....
I have not made much headway on any projects, but I have started working on some goodies for the T800W.

Stay Tuned for another awesome reveal of some awesome stuff!!!

Jon in Vt.
The Northern Rednecker

[Cooper]

been a bit since ive been on site, good progress so far and nice to see a fellow green mountaineer! (use to live in Burlington )

[Trucking4u]

So I have to say, I have not been doing a whole lot lately, but I had to do a little aluminum bending, and shining, and I ended up with this.

[img] [/img]

I think it will end up needing a twin, because why not!?

The official finish date for the T800W, so far I have determined, it needs to be done for Cabin Fever 2019( It is time to start talking about that, right?). So if anyone will have any trailers they will need pulled at that event, let me know, because I might show up with a bobtail rig!

Cooper, also good to meet a fellow green mountaineer on this forum!


Jon in Vt.
The Northern Rednecker

[Trucking4u]

Not much going on around here lately! But that's explainable.... I have been having long work days, and when I get home, it is dinner and off to bed for me! Anyway, I have gotten a little done on the truck.

The differentials are fully assembled, and ready to mount.

[img] [/img]

Motor is ready for the final drop in.

[img] [/img]

Other than that, not much happening here. Began work on a logyard to drive my truck into.

Thanks for reading!


Jon in Vt.
The Northern Rednecker