|
Construction Equipment If it digs, pushes, hauls dirt "off road" post it here. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Re: PC1800 Front Shovel (1/12)
Love the 777. This build is going to be great. It's going to influence me when I build my excavator. Using regular parts. I like it. Keep up the great work.
|
#2
|
||||
|
||||
Re: PC1800 Front Shovel (1/12)
Thanks for all the feed back on the hydraulic questions, now I will have to put it to good use....
Next trick will be getting everything to fit, even though this is a good size model there isn't a lot of extra space left over after all the "big goodies" are in place. Played around with different placements of everything on a plywood template, this seems to be about the best use of the space....the rusty 2"x4" HSS may end up being used as the tank, after getting a good cleaning and cut to proper length it will hold about 1000cc. I dont have the drive motor yet for the pump, it will be belt drive with about 3:1 reduction using a small 2L vbelt. The servos will be mounted on a plate above the motor/pump, the handle shafts on the valve will be cut shorter and then connected to the servos with ball linkage rods. Nothing to exciting but here are some pics.... [IMG] [IMG][/IMG] [IMG][/IMG] Thanks for looking!! KP |
#3
|
|||
|
|||
Re: PC1800 Front Shovel (1/12)
Only a suggestion but why don't you go with an aluminum tank it would seem to have better heat transfer to help keep the oil cooler. Ed
|
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
|
|