Volvo EC300D

[Trucker47]

Great build you go got going and the craftsmanship is awesome!

Chris

[elliot330]

Hi ....

Fantastic build so far... have you thought about the hydraulics yet?

Frank aka Vario supply everything from complete rams to kit versions, plus pumps. Worth dropping him an email with your requirements and seeing what he can do for you!

Good luck with the rest of it.

This is the price list from his website, scroll down for pumps etc

http://translate.googleusercontent.c...1HBm1FY8Lqmo-A

[RCP57]

Originally Posted by elliot330

Hi ....

Fantastic build so far... have you thought about the hydraulics yet?

Frank aka Vario supply everything from complete rams to kit versions, plus pumps. Worth dropping him an email with your requirements and seeing what he can do for you!

Good luck with the rest of it.

This is the price list from his website, scroll down for pumps etc

http://translate.googleusercontent.c...1HBm1FY8Lqmo-A

Thanks very much for the compliments and the link!

The hydros are in the works and will hopefully be all custom made. The cylinders should be finished very soon!

I took a couple days off from the Volvo but I got back at it a little today.


http://youtu.be/-UCvGKvOdXA

[steamer]

Blue is my favorite color. Reg it sounds more like a Harley than a Honda. Great work on the swing drive. Having all those boxes of spare parts sure comes in handy. And you know what the ladies say, If they can't find you handsome, maybe they can find you handy.
Rob

[RCP57]

Originally Posted by steamer

Blue is my favorite color. Reg it sounds more like a Harley than a Honda. Great work on the swing drive. Having all those boxes of spare parts sure comes in handy. And you know what the ladies say, If they can't find you handsome, maybe they can find you handy.
Rob

Thanks Rob! HAHA! Having some "bits and pieces" stocked up never hurt anyone! I'm not sure if my lady finds me handsome OR handy though really? I guess there must be a reason and it's definately not for my money because I never seem to have any of that!

I'm really happy with the way the swing drive turned out. I was worried it would be too slow but it turns around 7rpm so it's close to what it should be and seems like it will be smooth with a little practice.

Oh ya, Blue sounds good, I would have bought more of it for my shop had I not found the red one for a really good price.

A couple pics from today...

Reg

[pumptech]

Just watched the vid of her swinging around,looks awesome,keep up the great work

[RCP57]

Originally Posted by pumptech

Just watched the vid of her swinging around,looks awesome,keep up the great work

Thanks very much! I've been working this week so I haven't made much progress on the excavator. My prototype pump is done now and some other pieces are in the works. The pump puts out around 1200ml per minute with no load so now I'm hoping it will pump enough pressure!

Reg

[RCP57]

I finally got to spend most of a day in the shop today It doesn't really seem like I accomplished much but everything I did today was tedious.

Hopefully I can finish the undercarriage tomorrow and then get back to working on the body.

Reg

[check]

Your work is very good. I like your creation and I have it.

[Vanisle]

Wow Reg. You work fast. It looks great so far. I can't remember if you asked to see a valve in another thread or not but I have some Leimbach valves if you wanted to look at one.

Richard

[chaseracer]

looking great, amazing work. wow there are some great builders and machines here on the island. keep it comming I and watching

[RCP57]

Originally Posted by Vanisle

Wow Reg. You work fast. It looks great so far. I can't remember if you asked to see a valve in another thread or not but I have some Leimbach valves if you wanted to look at one.

Richard

Hey Richard, Yes I did ask if anyone had any pics or whatever of the valves apart. I was hoping to be able to see what they look like inside so that we could build something similar knowing it would work right the first time. We have a pump built that I hope will work, the cylinders are drawn up, relief valve is built and working but we haven't attemped the valves yet so any info would be appreciated for sure!

Thanks for the compliments guys, I'm headed out to the shop!

Reg

[RCP57]

I finally got both tracks done....

[RCP57]

For those who are interested... http://youtu.be/nPCMwuudq1o

[RCLogger]

Right on Reg
Its always cool to have a new build move for the first time... Did you end up using a Sabertooth ? Also, what did you do for a slip-ring or did you build one ?

greg

[RCP57]

Originally Posted by RCLogger

Right on Reg
Its always cool to have a new build move for the first time... Did you end up using a Sabertooth ? Also, what did you do for a slip-ring or did you build one ?

greg

Yes and yes. I used a sabertooth on the tracks as well as the swing. I'm hoping to use the spare channel on the second sabertooth to run the pump but I don't know how that will go yet. You probably would guess that I built my own slip-ring and you would be correct. It needs a little fine tuning as it has a couple dead spots where it breaks contact at the moment but I think it will work fine once I do that. Have you decided what your doing on your slip-ring yet?

Reg

[Trucker47]

Awesome work! I am always amazed how fast this build is going every time i check it. Just wondering on the Sabertooth can you program it to run both motors off one channel? So that it becomes a dual motor single channel esc?

Thanks,
Chris

[RCP57]

Originally Posted by Trucker47

Awesome work! I am always amazed how fast this build is going every time i check it. Just wondering on the Sabertooth can you program it to run both motors off one channel? So that it becomes a dual motor single channel esc?

Thanks,
Chris

I'm not sure exactly what your looking for but you can set the mixing so that each channel is completely independent from the other. That's how I've set it up on my swing motor. I'm sure you could power two motors off of the same side of the speed control without issues and still have the other channel for????

Hope this helps?

[Iron Art]

Reg, I'm amazed at your skill and speed that you can utilize those skills, In my case the faster I go the worse the outcome, that dosn't apply in your case. Cool build!!! Fred

[modelman]

Very nice work! Would you show a picture of the slip ring?