Taranis X9E

[Stuart]

Originally Posted by Berman

This looks like a nice unit. Not as expensive as some of the other tray style units like the Servonaut zw04 etc.

I bought a DX6 (black version) and it refuses to work with my MFU's (works fine with my Beier though) so this might be a good alternative and future proof me for other units and some small construction equipment etc...

For sure, the Taranis works well with both the MFU and Beier modules and with the possibilty of 32 channels your more than future proofed.

Originally Posted by lickedi

Nice Job, om working on the same remote and could need some help with how to connect the 4axis joysticks to the remote ��

For the X & Y axis I cut the wires from the original joysticks and soldered to the new ones.

For the Z axis and pushbuttons you will need some 3 pin JST connectors, connect these to the spare sockets on the main board and configure the outputs on the radio, then calibrate the sticks/swithes and voila!

If you need more help then let me know.