|
Construction Equipment If it digs, pushes, hauls dirt "off road" post it here. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
2 IH 433 payscrapers (ps433-2 moves)
I do not quite remember all of the beginning so I'll give some pics w/a narrative . I decided to try to build (what I have seen thus far) what has not been done . so far it is a great success
the scaling of pics and design and pattern making , starts with a parts book and some general knowledge of compacity range as it's difficult to acquire data for these old machines . all motor scrapers have a basic shape and size according to bowl compacity . So I figured out the comparable machine in another bran such as a cat 637 to get the general dimensions . basically using the tire size to finesse the design the patterns the 5th wheel the cut plates waiting to be welded the next few pics are of the assembly . now scrapers are heavy so are these by design the round at the goose neck is a 12000# front axle king pin the bowl assembly the goose neck 5th wheel and goose neck some cab and sheet metal grill drive train HPI savage diffs anhime automation gear motors tried as a single speed great for loading but slow as **** for travel so playing with traxxas e-maxx 2 speed manual trans running out off room to be continued |
#2
|
||||
|
||||
I will be back to work on this 1 which I labeled ps433-2 soon . My 2nd trans showed up today . now to free up the lathe to make a few couplings .
as I said before I will have my vids up as soon as I get you-tube figured out . I got the watching fixed by getting a computer with a bigger processor thats it for now thanks for looking IHSteve |
#3
|
||||
|
||||
looking good steve, cant wait for more!!
__________________
"My son will have a chocolate milk" -J.P. Next East Coast Minitruckers Meet: Arioch |
#4
|
||||
|
||||
Glad to see you found another trans.
__________________
AKA "00" Biddle RIP FreddyGearDrive 2-12-59/12-19-11 |
#5
|
||||
|
||||
Thats sweet...alll hand made..You the man Steve!!
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. One Bus Stop Short Of The Short Bus... |
#6
|
|||
|
|||
Your looking good Steve. Ed
|
#7
|
||||
|
||||
These are so sweet.
|
#8
|
|||
|
|||
good to see pics again lol now i just needa get my butt in gear and start my thread again so far nothin has changed with any of my scrap piles lol
|
#9
|
||||
|
||||
Glad to hear about the new tranny Steve, look forward to an update.
__________________
Joe |
#10
|
||||
|
||||
Quote:
( dirtpusher9 ) " Glad to hear about the new tranny Steve, look forward to an update." thank you joe glad your here feels like home ( real home )no bs when you log on or phone calls of accusations when your busten you but trying to get your job done and get home to your wife ,kids and HOBBY . NUFF SAID ON THAT NOTE I'm soon to be ready for paint on my 5900i so while painting I'll be getting these tranny's in and fixing some flaws . Also It's starting to cool down a bit + looks like I'll be able to be in my shop more than just a 1/2 day/wknd ( I'll have to be ) thanks every 1 + FDG+joe +paul Oh If you mods do not like a certain few word I said , tell me I'll remove them IHB
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Last edited by ihbuilder; 08-15-2010 at 01:00 AM. |
#11
|
|||
|
|||
Re: 2 IH 433 payscrapers (ps433-2 moves)
Steve it seems to be really coming around. Ed
|
#12
|
||||
|
||||
Re: 2 IH 433 payscrapers (ps433-2 moves)
thanks Ed . I'm actually working on it I haven't felt well yesterday now it carried into today so it's not lack of sleep . Its the way my body is with this weather . I'm figuring my gear train so I do not have to re do
here's the first vid of it loading I wiil try to get the next 1 on y-tube for those who can't see p-b IHB
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#13
|
|||
|
|||
Re: 2 IH 433 payscrapers (ps433-2 moves)
Steve.. Nice going..
I could bring the D8 by to use as a push cat to save all that bending over..LOL I always wondered how well a scraper would work for us..Lots of possibilities What does the scraper weigh..?? |
#14
|
||||
|
||||
Re: 2 IH 433 payscrapers (ps433-2 moves)
in excess of 40# , the weight is the key
IHB
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#15
|
||||
|
||||
Re: 2 IH 433 payscrapers (ps433-2 moves)
Freakin awesome Steve. I guess you're getting motivated
|
#16
|
||||
|
||||
Re: 2 IH 433 payscrapers (ps433-2 moves)
yea I saw your pics on stripmine and just about cried
IHSteve
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#17
|
||||
|
||||
Re: 2 IH 433 payscrapers (ps433-2 moves)
Wow! Great job with that scraper. Loved watching the video of her in action. At 40 pounds, she is pretty hefty! Must be a pain in the back to move her... literally. Can't wait to see more from you.
Dan |
#18
|
|||
|
|||
Re: 2 IH 433 payscrapers (ps433-2 moves)
ihbuilder-looking good!! what tires are you using and what size are they?
|
#19
|
||||
|
||||
Re: 2 IH 433 payscrapers (ps433-2 moves)
thanks Dan , yea she's getting heavy and not done yet still got to make the ejector and may fill the tires w/bb's + elec. and hydros . thats the purpose for the 5900i + rogers so I don't have to carry it
thanks Tom , the tires are off the tamiya mammoth . 6" dia. x 2" wide they scaled out rite on IHSteve
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#20
|
|||
|
|||
Re: 2 IH 433 payscrapers (ps433-2 moves)
Hey Steve run up here and move my excavator with your lowboy will you? Ed
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|