Michigan T-24 project

[jerry56]

Yeah Frizzen...
When I first tried it I hadn't used a ground wire and it doesn't work it has to have the ground reference.
That intermixing was the problem, I steer with ch5 on a rotary switch on the I6 ( an old smallhaul trick) but I use ch2 for forward and reverse. But I needed a boom up/down so I put it on ch9 on the 3 position switch since it doesn't seem to get used that much once you are set up. Slew and load up/down are on the other stick so far it seems to work for me...
Ahhh the out riggers... I just haven't come up with a simple way to do them ( and I'm all about simple)... If I figure something out I might just use a key fob for the outriggers