RC Truck and Construction  

Go Back   RC Truck and Construction > R/C Truck's Manufacturers/Venders/Retailers > RCP’s Aluminum Gravel Boxes and Accessories

RCP’s Aluminum Gravel Boxes and Accessories Welded aluminum dump boxes and more


Reply
 
Thread Tools Display Modes
  #1  
Old 01-25-2016, 09:07 PM
RCP57's Avatar
RCP57 RCP57 is offline
Big Dawg On The Bone
 
Join Date: Mar 2011
Location: Vancouver Island
Posts: 3,677
RCP57 is on a distinguished road
Default Vertical Ribbed Dump Trailer

This one has been waiting in the background for a while but I finally got the frame drilled and tapped today to mount the suspension. It will be similar to the old school trailer but with taller sides and some other changes. I don't have much to show for now but over the couple of weeks things should start coming together.

Chassis...Tri-axle with airbags




For sale, 1 near new, barely used 2.5x0.4mm metric tap. Could use some TLC but is still sharp as it only threaded 7 holes...

Reply With Quote
  #2  
Old 01-25-2016, 10:30 PM
Mikem Mikem is offline
Journeyman
 
Join Date: Mar 2013
Location: Ontario
Posts: 705
Mikem is on a distinguished road
Default Re: Vertical Ribbed Dump Trailer

Weld it together again I know you can do it ! Mike
Reply With Quote
  #3  
Old 01-25-2016, 10:51 PM
Northern Farmer's Avatar
Northern Farmer Northern Farmer is offline
Big Dawg On The Bone
 
Join Date: Jul 2015
Location: Montreal QC
Posts: 1,513
Northern Farmer is on a distinguished road
Default Re: Vertical Ribbed Dump Trailer

Here's what I shared with Reg to give him a rough idea of what I wanted

Reply With Quote
  #4  
Old 01-25-2016, 10:55 PM
Northern Farmer's Avatar
Northern Farmer Northern Farmer is offline
Big Dawg On The Bone
 
Join Date: Jul 2015
Location: Montreal QC
Posts: 1,513
Northern Farmer is on a distinguished road
Default Re: Vertical Ribbed Dump Trailer

Quote:
Originally Posted by RCP57 View Post
For sale, 1 near new, barely used 2.5x0.4mm metric tap. Could use some TLC but is still sharp as it only threaded 7 holes...

Oh snap!
Reply With Quote
  #5  
Old 01-25-2016, 10:56 PM
RCP57's Avatar
RCP57 RCP57 is offline
Big Dawg On The Bone
 
Join Date: Mar 2011
Location: Vancouver Island
Posts: 3,677
RCP57 is on a distinguished road
Default Re: Vertical Ribbed Dump Trailer

Thankfully I can moderate posts within my Vendors section. If the trailer I build turns out nothing like that one I can delete the picture you posted.lol Just kidding.
Reply With Quote
  #6  
Old 01-25-2016, 10:56 PM
RCP57's Avatar
RCP57 RCP57 is offline
Big Dawg On The Bone
 
Join Date: Mar 2011
Location: Vancouver Island
Posts: 3,677
RCP57 is on a distinguished road
Default Re: Vertical Ribbed Dump Trailer

I've never seen a tap break in two places before at the same time
Reply With Quote
  #7  
Old 01-25-2016, 11:01 PM
Northern Farmer's Avatar
Northern Farmer Northern Farmer is offline
Big Dawg On The Bone
 
Join Date: Jul 2015
Location: Montreal QC
Posts: 1,513
Northern Farmer is on a distinguished road
Default Re: Vertical Ribbed Dump Trailer

Lmao that's one plus of being a mod The tap sure got hot before snapping looking at the discolouration.
Reply With Quote
  #8  
Old 01-25-2016, 11:07 PM
RCP57's Avatar
RCP57 RCP57 is offline
Big Dawg On The Bone
 
Join Date: Mar 2011
Location: Vancouver Island
Posts: 3,677
RCP57 is on a distinguished road
Default Re: Vertical Ribbed Dump Trailer

Quote:
Originally Posted by Northern Farmer View Post
Lmao that's one plus of being a mod The tap sure got hot before snapping looking at the discolouration.
Haha, I can only change stuff here though and I don't even know how.lol No need to change things. I know some of the details probably won't make it onto the mini trailer but we'll get it close.

The tap didn't get hot. That's just the coating they apply(gold color). You can see that they are not the best quality as the coating has already worn off the tip after tapping just a few holes. They actually cut fairly well but it slipped between my thumb and finger causing it to "flick" sideways and breaking. I'm glad I bought two or I would be in trouble!
Reply With Quote
  #9  
Old 01-25-2016, 11:23 PM
Bo Wallen's Avatar
Bo Wallen Bo Wallen is offline
Big Dawg On The Bone
 
Join Date: Nov 2011
Location: West Cornwall CT
Posts: 1,594
Bo Wallen is on a distinguished road
Lightbulb Re: Vertical Ribbed Dump Trailer

Just an idea....I use one of this : http://www.micromark.com/microlux-ta...ture,8363.html
Reply With Quote
  #10  
Old 01-26-2016, 12:16 AM
RCP57's Avatar
RCP57 RCP57 is offline
Big Dawg On The Bone
 
Join Date: Mar 2011
Location: Vancouver Island
Posts: 3,677
RCP57 is on a distinguished road
Default Re: Vertical Ribbed Dump Trailer

I do have one of those Bo but I've never used it. I'm sure it would work well though. I had the frame set up in the vise on my mill and was tapping a few holes by hand as I went so that I could install the suspension and figure out the best axle spacing. I was tapping a hole close to the chuck on the mill and didn't really leave enough room for a good grip. My fingers slipped and boink. It was my fault for not giving myself more room and they are Chinese taps so the quality isn't great. Thankfully I was able to wind the broken piece out. Once the rails were taken off the mill freehand tapping was no problem but it did make me say bad words when the brand new tap broke.lol
Reply With Quote
  #11  
Old 01-26-2016, 12:24 AM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: Vertical Ribbed Dump Trailer

oh snap tap!!. i got a set of metric body mount size drill and tap from my buddy in england
when he did my locker box. i went to 3 tool stores by me and could only get that size in a large set
with you living on that remote island up there it has to just as tough.... LOL
Reply With Quote
  #12  
Old 01-26-2016, 12:26 AM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: Vertical Ribbed Dump Trailer

nice trailer by the way!!!
Reply With Quote
  #13  
Old 01-26-2016, 10:05 AM
speedy8305 speedy8305 is offline
Apprentice
 
Join Date: Aug 2012
Location: Port Wentworth, GA
Posts: 408
speedy8305 is on a distinguished road
Default Re: Vertical Ribbed Dump Trailer

Hey Reg thats gonna be a great ooking trailer when your done. Polished aluminum or powder coating
__________________
Steve
Reply With Quote
  #14  
Old 01-26-2016, 12:25 PM
Northern Farmer's Avatar
Northern Farmer Northern Farmer is offline
Big Dawg On The Bone
 
Join Date: Jul 2015
Location: Montreal QC
Posts: 1,513
Northern Farmer is on a distinguished road
Default Re: Vertical Ribbed Dump Trailer

I'll be polishing her up when completed no powdercoating for this dumper. Only the chassis will be black.
Reply With Quote
  #15  
Old 01-26-2016, 12:33 PM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: Vertical Ribbed Dump Trailer

polish then clear coat like the big ones?
Reply With Quote
  #16  
Old 01-26-2016, 12:46 PM
Northern Farmer's Avatar
Northern Farmer Northern Farmer is offline
Big Dawg On The Bone
 
Join Date: Jul 2015
Location: Montreal QC
Posts: 1,513
Northern Farmer is on a distinguished road
Default Re: Vertical Ribbed Dump Trailer

Ya going to clear coat it when done polishing. Don't feel like re-polishing the trailer every time she gets put to work lol
Reply With Quote
  #17  
Old 01-26-2016, 02:06 PM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: Vertical Ribbed Dump Trailer

10-4
Reply With Quote
  #18  
Old 01-26-2016, 04:47 PM
Mikem Mikem is offline
Journeyman
 
Join Date: Mar 2013
Location: Ontario
Posts: 705
Mikem is on a distinguished road
Default Re: Vertical Ribbed Dump Trailer

Polished till it glows in the dark !
Reply With Quote
  #19  
Old 01-27-2016, 04:17 PM
Northern Farmer's Avatar
Northern Farmer Northern Farmer is offline
Big Dawg On The Bone
 
Join Date: Jul 2015
Location: Montreal QC
Posts: 1,513
Northern Farmer is on a distinguished road
Default Re: Vertical Ribbed Dump Trailer

That's the plan
Reply With Quote
  #20  
Old 01-28-2016, 08:15 PM
RCP57's Avatar
RCP57 RCP57 is offline
Big Dawg On The Bone
 
Join Date: Mar 2011
Location: Vancouver Island
Posts: 3,677
RCP57 is on a distinguished road
Default Re: Vertical Ribbed Dump Trailer

Trailers, trailers, everywhere. Not a lot of progress on this one but a little. I have been working as quickly I as can the last few days with my fingers on a few different projects. I made some time today to start the tub on this one. The sides on this seem tall to me but I think it is actually about right when compared to the trailer Brandon posted. I'm sure it will look a lot different once the ribs are added also. It's not too late if you feel it's too tall Brandon. More to come soon....


Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:56 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.