Hayes HD Dump Truck - Take II

[Northern Farmer]

Bonerific!

[RCP57]

BAHAHAHAHA!!!!!!!!!

[TRUCKMAKER]

Looks great Reg! And yeah what he said ^^^^^. Or did!

[Kaan]

Wow, looks awesome

[bigford]

if you ask rw nicely he will make them cylinders work

[Lil Giants]

Did a lot of chin wagging while visiting your shop last week... in disbelief now that I didn't ask to see you strike a few arcs to see your magic happen in person... musta got heat stroke on Saturday...

Great work, as always

[RCP57]

Thanks guys. Yes, we had a great BS Joe! It was good to finally meet you in person and shoot the breeze over the weekend. I don't think there is much magic in my welding ability though. The magic is in the grinding filing and sanding afterward!

[Cooper]

Grinding, sanding,,,,, yeah all that fun stuff,,!!! I equate it to drywall, every time on is like the last coat!!! But if looking at my work I don't practice what I preach. Lol!!! I got all excited once I saw that telescopic cylinder!!! I think you should make that a real one, then I can copy it. !!!! Lol!!! Looks really good reg!!! Well back to drywall and replacing carpet!!

[RCP57]

Lou and I attended a show in Port Alberni BC yesterday. It was nice to catch up with Lou again as well as a few of my wife and I's friends from town there. We managed to snap a few pics of the baby Hayes on big brothers fender...

[makcc]

Hello,
Very very good model.
How you made leaf springs for this model. Especially for the front axle.

[RCP57]

The springs are made using old lawn rakes. The fingers on the rakes are slightly wider than a stock Tamiya spring but work really well for 1/14 scale. I have to heat the ends to roll eyes into them but it's not too bad if you build a jig.

Reg

[DADSGARAGE]

Just took another look at this build....and have to say you have done an outstanding job, nice very nice!!!

Any plans or time for another 1/10 scale build in the near future??

[RCP57]

Thanks KP. At this point I have no plans to build anything for myself in any scale. I would like to build a dozer in 1/10 but that seems less and less likely all of the time. When RCP's is busy I am basically on the computer answering messages or in the shop from the time I get up until the time I go to bed. When it's not busy I either don't have the extra money for a personal project or I honestly just want to GTFO of the shop and do something outside.lol Maybe sometime in the future things will change but for now that's reality. It isn't so bad building stuff for other people and having it go away. I get my build fix and don't have to store the finished product!

[D8R]

http://i1293.photobucket.com/albums/...psglkhmn66.jpg

Those clamps, are they used when welding? Where can I find those, never seen something like that before.
Dan

[RCP57]

Yes Dan, they are called Cleco clamps. They work well and are fairly cheap. Just don't get them too hot.

[RCP57]

I've had this one on the bench over the last few days as I try to get a little progress made on several different projects. A few weekends ago I spent a day and a half making a scissor lift for the bed using a P16 actuator. It worked OK up to about 8# but struggled to do more so I tossed it aside. I have been trying to avoid using a screwdrive in this thing but I finally gave in and went with what I know. Unlike any other I've built over the last 3+ years, this one is in the truck chassis. It has roughly 18# of lead acid batteries in the back and dumps it with ease. I wanted to keep the dummy lift cylinders and prop rod as symmetrical as possible when the bed was up in an effort to draw less attention to the prop rod itself. Some careful "eyeball" measuring of the prop rod length took care of that.lol The truck will be yellow so I'll have to decide what color looks the least noticeable on the prop rod(yellow or black). I'm happy to have this step done as it was the last major hurdle to get over. I will wire up and mount some limit switches, then I can get on with the final details and have this ready for paint when the weather warms up!

Dump test video... https://www.youtube.com/watch?v=uvS2CI2OUDM








Reg

[RCP57]

It's been a few months again but it's time to finish this up so I've been putting in some hours over the last few days. Most of the major building was finished when I last left off but there were a lot of details to add. I have a lot to do yet but the last three days have been productive for making tiny "one off" parts.

I started out by making some roof lights. I needed Arrow 39's for this truck and as far as I know they are not available so some hand filing was needed after some basic machining... I also turned a horn in the lathe while I was at it.









Next up was to cut the amber plexi for the side makers and machine a tow pin for the front bumper...




Added mirrors and trimmed the exhaust tip.



Then I made up a shovel and mounted it to the bed along with the axe I made months ago.




Finally I moved to the rear where I added a tow pin, brake booster pods and a pair of Russ's tail light bezels. Oh, and mudflaps too!





There are still a few little things to do but I hope to have it ready for paint this coming week...

[egronvold]

A million-dollar-build

[RCP57]

Originally Posted by egronvold

A million-dollar-build

Haha, thanks! Realistically it would be pricey one for sure. Not sure about a million $$ but $10000 wouldn't be out of the question for the time and money invested. I haven't touched it yet today but I put over 25hrs in it again just in the last 3 days. I would estimate that 400+hrs at this point would not be a stretch plus the materials cost.

[Northern Farmer]

Work of art on wheels