|
#1
|
|||
|
|||
Re: Bob's M1070 (maybe)
Quote:
I was looking at the 1.55" rock crushers as they are 94mm, and the real tires are 53" which at 1/14 scales to 96mm. At 1/16 they scale down to 84mm but I couldnt find tires that size. I assume that yours are the 1.9"s if they have 19 Written on them which are 110mm tall. At 1/14 it should be 25.5" long. At 1/16 should be 22.3" long. Width at 1/14 is 7.2" and at 1/16 should be 6.3" wide. So yours must be closer to 1/10 or 1/12. I know tlt axles are 180mm/7" wide at the outside of the hex so depending on wheel offset it should be pretty close if the tires arent too wide. My main issue at the moment is working out the width difference between tlt axles and semi dual output axles. The semi axles are narrower so getting the wheel width to match is what im trying to work out. Would appreciate any help if you've already sorted that issue. |
#2
|
||||
|
||||
Re: Bob's M1070 (maybe)
Quote:
http://www.the-blueprints.com/bluepr...osh_het_m1070/ Does this help any? Cheer's, Neil. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|