First Conversion: Bruder Delta Loader

[RobotArms24]

Some progress finally!

Big mess from trimming plastic!


Motors are mounted to a piece of 1/4" aluminum. I drilled and tapped the plate to bolt the motor mounts, and sabertooth on to.














Test video on the floor, hauling around a 6000mah 2cell lipo.
https://www.youtube.com/watch?v=BSA80z1AVHs

It's a little slow in my opinion... Maybe I will try the higher RPM motor down the road... For now, it's on to modifying and mounting servos!