RC Truck and Construction  

Go Back   RC Truck and Construction > RC Tech section. > Mechanical tech

Mechanical tech This is for the mechanical parts of a model. Gear reductions, Axles, Transmissions, General drive line


Reply
 
Thread Tools Display Modes
  #1  
Old 11-11-2013, 11:13 AM
rsd53 rsd53 is offline
Newbie
 
Join Date: Sep 2013
Location: Boonville, IN
Posts: 102
rsd53 is on a distinguished road
Default Transmission options

I'm trying to get an idea of what you guys would recommend for a transmission for my Tonka conversion. I have a stock Tamiya motor and 3-speed transmission, but I won't have enough room inside the cab to use them.

I'm looking for something I can use a 540 motor with, that is shorter in length, height, and isn't too expensive.I haven't had much luck with the vendors sites, when it comes to price.

Thanks, Rob
Reply With Quote
  #2  
Old 11-11-2013, 01:06 PM
JAMMER JAMMER is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Liverpool New York
Posts: 1,346
JAMMER is on a distinguished road
Default Re: Transmission options

Rob check out RC4WD for a transmission they have a 2 speed that is fairly compact. Ed
Reply With Quote
  #3  
Old 11-11-2013, 05:20 PM
Stuff's Avatar
Stuff Stuff is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Estevan, Sk, Canada
Posts: 1,281
Stuff is on a distinguished road
Default Re: Transmission options

HD semi version (new) http://www.wtbcar.com/shopping/index...product_id=203

what I have in mine - http://www.wtbcar.com/shopping/index...product_id=154

or try a rc4wd dig tranny?
__________________
Rc's are like pringles. You can't have just one!!
my YouTube is -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Subscribe!!
My Facebook -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #4  
Old 11-11-2013, 08:24 PM
rsd53 rsd53 is offline
Newbie
 
Join Date: Sep 2013
Location: Boonville, IN
Posts: 102
rsd53 is on a distinguished road
Default Re: Transmission options

Quote:
Originally Posted by JAMMER View Post
Rob check out RC4WD for a transmission they have a 2 speed that is fairly compact. Ed
Ed, that one is on my list, but a little more than I want to spend. I do think it would be a great fit though.
Reply With Quote
  #5  
Old 11-11-2013, 08:29 PM
rsd53 rsd53 is offline
Newbie
 
Join Date: Sep 2013
Location: Boonville, IN
Posts: 102
rsd53 is on a distinguished road
Default Re: Transmission options

Quote:
Originally Posted by Stuff View Post
HD semi version (new) http://www.wtbcar.com/shopping/index...product_id=203

what I have in mine - http://www.wtbcar.com/shopping/index...product_id=154

or try a rc4wd dig tranny?
Thanks for the links. I really like the looks of these, and the low profile they provide. however both are on the upper limit of my budget. I had never been on that site before, but I do plan on checking them out more thoroughly.
Reply With Quote
  #6  
Old 11-11-2013, 09:26 PM
rsd53 rsd53 is offline
Newbie
 
Join Date: Sep 2013
Location: Boonville, IN
Posts: 102
rsd53 is on a distinguished road
Default Re: Transmission options

I've also been looking at the RC4WD planetary transmissions. If I coupled a 16:1 with a 65t motor, I would probably have all the speed I needed.

Is anyone using one of these?
Reply With Quote
  #7  
Old 11-12-2013, 08:23 PM
Izzy's Avatar
Izzy Izzy is offline
Backyard enginier
 
Join Date: Aug 2010
Location: Shipshewana, Indiana
Posts: 1,825
Izzy will become famous soon enoughIzzy will become famous soon enough
Default Re: Transmission options

A bit different approach here - but take a look at some of the robot shops - they carry electric motors with gear reduction units already attached. sometimes they are more affordable. but they are generally more compact.
Reply With Quote
  #8  
Old 11-13-2013, 06:24 AM
rsd53 rsd53 is offline
Newbie
 
Join Date: Sep 2013
Location: Boonville, IN
Posts: 102
rsd53 is on a distinguished road
Default Re: Transmission options

Quote:
Originally Posted by Izzy View Post
A bit different approach here - but take a look at some of the robot shops - they carry electric motors with gear reduction units already attached. sometimes they are more affordable. but they are generally more compact.
Izzy, that's a great idea, and I will start looking into that option right away.
Reply With Quote
  #9  
Old 11-23-2013, 02:28 PM
Espeefan's Avatar
Espeefan Espeefan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Wisconsin
Posts: 2,888
Espeefan has a spectacular aura aboutEspeefan has a spectacular aura aboutEspeefan has a spectacular aura about
Default Re: Transmission options

I too would suggest looking at the planetary style gearmotors. You might even consider robbing such a set-up from a cheap power screwdriver, or an old cordless drill. You could run a rear axle, using a driveshaft with that set-up, or you could also drive the wheels directly off the output shaft of the gearmotor, although then you will one motor for each wheel you wish to power.
__________________
Nathan
Reply With Quote
  #10  
Old 12-16-2013, 03:44 PM
Rimrock Rimrock is offline
Wannabe
 
Join Date: Jul 2013
Location: Western NO
Posts: 355
Rimrock is on a distinguished road
Default Re: Transmission options

Servonaut planetary gearmotors are strong, quiet and compact. Over here in the old world a lot of folks that are into RC trucks, quickly throw out the noisy, backlashing Tamiya 3 speed, and it's motor which is more suitable for Formula 1...Most popular is the GM32U370, 7.2 V and output speed of about 370-400 rpm. (The speed with a standard 1:2.666 differential with equal 2'nd gear on a standard Tamiya 3 with a motor turning 6-7000 rpm, as of e.g an LRP Truckpuller) Will give a speed of 1.5 mph, which many find very suitable, and have no trouble dealing with total weights of 50-60 lbs. there is also the GM32U450, 12 V, which got double power. Costs about 100 USD. I don't know if there are any dealers over there, or what shipping cost from Germany. Will be cheaper disassemble a battery screwdriver, if one comes over one with a suitable rpm. About 150 rpm on the wheels of Tamiya 1:14 size tires gives the 1.5 mhp speed..
Attached Images
File Type: jpg Scania R620 sept 2013 009.jpg (86.0 KB, 91 views)

Last edited by Rimrock; 12-16-2013 at 03:46 PM.
Reply With Quote
  #11  
Old 01-22-2014, 12:49 AM
ricm ricm is offline
Green Horn
 
Join Date: Sep 2012
Location: Central Coast, NSW Australia
Posts: 163
ricm is on a distinguished road
Default Re: Transmission options

My vote would be a pre-assembled gearmotor as suggested by Izzy - absolutely right to look at the robot parts suppliers....

try http://www.technobotsonline.com/

these guys have a HUGE range to suit pretty much anything. And pricing is pretty good
Reply With Quote
  #12  
Old 02-10-2014, 05:52 PM
RodneyO's Avatar
RodneyO RodneyO is offline
Newbie
 
Join Date: Mar 2013
Location: Pickens,SC
Posts: 90
RodneyO is on a distinguished road
Default Re: Transmission options



has anyone used this transmission in any of there builds?If so what is your opinion on it?Thanks
Reply With Quote
  #13  
Old 02-10-2014, 06:52 PM
Stuff's Avatar
Stuff Stuff is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Estevan, Sk, Canada
Posts: 1,281
Stuff is on a distinguished road
Default Re: Transmission options

I have a 14:1 on the way from korea. I'll see what it's like when it gets here. might be too slow at 14:1 for drive motor but it is intended for my lift. there is a lower reduction to which might be what the RC4WD ones are.
__________________
Rc's are like pringles. You can't have just one!!
my YouTube is -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Subscribe!!
My Facebook -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #14  
Old 02-10-2014, 08:02 PM
RodneyO's Avatar
RodneyO RodneyO is offline
Newbie
 
Join Date: Mar 2013
Location: Pickens,SC
Posts: 90
RodneyO is on a distinguished road
Default Re: Transmission options

Thanks.I've seen a 1:5 ratio one also on eBay.I'm running a 45t motor from rc4wd.Appreciate you giving me your input.
Reply With Quote
  #15  
Old 02-11-2014, 07:41 PM
Espeefan's Avatar
Espeefan Espeefan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Wisconsin
Posts: 2,888
Espeefan has a spectacular aura aboutEspeefan has a spectacular aura aboutEspeefan has a spectacular aura about
Default Re: Transmission options

A 4:1 or a 5:1 is a good auxiliary reduction box to add to another main transmission, but you'll want a lot more reduction than that, if you are thinking of replacing a Tamiya 3 speed with a more compact planetary or spur gear transmission.
__________________
Nathan
Reply With Quote
  #16  
Old 02-13-2014, 11:12 AM
RodneyO's Avatar
RodneyO RodneyO is offline
Newbie
 
Join Date: Mar 2013
Location: Pickens,SC
Posts: 90
RodneyO is on a distinguished road
Default Re: Transmission options

Ok.Thanks.I'm looking for something a little more compact to replace the 3 speed that I have in my KH.Looked at the links on here and was thinking of running one of the robot planetary ones.Just don't know which ratio to go with.
Reply With Quote
  #17  
Old 07-28-2014, 08:15 PM
PaulNZ's Avatar
PaulNZ PaulNZ is offline
Green Horn
 
Join Date: Jun 2014
Posts: 198
PaulNZ is on a distinguished road
Default Re: Transmission options

Hi All

has anyone fitted a 2 speed either in front or behind a 3 speed?

if so what did you use?
Reply With Quote
  #18  
Old 08-16-2014, 12:46 AM
oldracer oldracer is offline
Newbie
 
Join Date: Jun 2014
Posts: 1
oldracer is on a distinguished road
Default Re: Transmission options

can you or some one tell me where i can get a drive shaft center support bearing, thanks oldracer
Reply With Quote
  #19  
Old 08-16-2014, 09:57 PM
TRUCKMAKER's Avatar
TRUCKMAKER TRUCKMAKER is offline
Big Dawg On The Bone
 
Join Date: Aug 2011
Posts: 1,652
TRUCKMAKER is on a distinguished road
Default Re: Transmission options

Quote:
Originally Posted by oldracer View Post
can you or some one tell me where i can get a drive shaft center support bearing, thanks oldracer
Check out the hobby shop section here on the forum, there are a few available there
Reply With Quote
  #20  
Old 01-26-2015, 12:11 AM
RoadFlyer's Avatar
RoadFlyer RoadFlyer is offline
Newbie
 
Join Date: Mar 2013
Location: Buck Meadows, CA
Posts: 73
RoadFlyer is on a distinguished road
Default Re: Transmission options

Quote:
Originally Posted by RodneyO View Post


has anyone used this transmission in any of there builds?If so what is your opinion on it?Thanks
I just put one of these into my Knight Hauler. Tried it first with a RC4WD 80 turn modified Crawler motor...a little too slow. Next put the original 540 Tamiya motor that came with K.H...runs great. I've got 2 speeds instead of the stock 3 speeds. These planetary gears are much quieter than the stock 3 speed Tamiya transmission and a lot smother. I would recommend this as a must do for all the Tamiya truck line.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:02 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.