|
|
|||||||
| Mechanical tech This is for the mechanical parts of a model. Gear reductions, Axles, Transmissions, General drive line |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
11-25-2013, 08:49 PM
|
||||
|
||||
Re: RC4WD Semi Diff
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe 
|
|
#2
11-25-2013, 08:59 PM
|
||||
|
||||
|
Re: RC4WD Semi Diff
Quote:
|
|
#3
11-25-2013, 10:52 PM
|
||||
|
||||
|
Re: RC4WD Semi Diff
Just a FYI, Tamiya now do a hardened bevel pinon and cup set for their stock axles:
#56529 4x2 (i.e, one axle) #56530 6x4 (two axles) Thinking of getting some as I have a tonne of backlash now in my diffs in both trucks (**** those high miles...  )
__________________
4 tractors/trailers and still no king hauler...
|
|
#4
11-27-2013, 08:11 PM
|
||||
|
||||
|
Re: RC4WD Semi Diff
Quote:
 I took my KH front diff apart last night to see the pinion was badly worn, but not strip. The spider cross broke & one of the pins was floating around in the pumpkin, probably went through pinion/crown mesh a few times.
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
