![]() |
|
General Discussion A place to post off topic discussions. |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]()
Hy Guys, I purchased said item at Dortmund this year for one of my new models
![]() After connecting all of the servos all was good, turn off the transmitter came back to it later turn it all on again and this came up. ![]() ![]() Has anyone had any experience with this issue? |
#2
|
|||
|
|||
![]()
did u buy it new or used because that may be the problem
![]() ![]() ![]() ![]() |
#3
|
||||
|
||||
![]() Yes it was new out of the box from TTM in Germany |
#4
|
|||
|
|||
![]()
Hi Paul,
Hold the black roller button down for 5 to 30 seconds and it will clear..
__________________
Elliot. |
#5
|
|||
|
|||
![]()
did paul sort it out mate
|
#6
|
|||
|
|||
![]()
have u fixed the problem
|
#7
|
||||
|
||||
![]()
Thanks Elliot, I did what you said and it now works fine. How did you know about the fix?
Paul |
#8
|
|||
|
|||
![]()
elliot is talented
|
#9
|
|||
|
|||
![]()
Hi Paul, glad it worked. My radio did the same a few times, its a problem with Version 1 of the software. Sometimes it clears by itself but once I couldn't get rid of it, so I called horizon hobby and they told me about holding the roller button done until it clears.
__________________
Elliot. |
#10
|
|||
|
|||
![]()
I would suggest upgrading the firmware on the 10t if you haven't already.
Note: you should backup you models to the SD card before doing so. You may also need to re-bind the models. Cheers, AP |
#11
|
||||
|
||||
![]() Quote:
Now it takes about ten seconds for the transmitter to boot up. Prior to the firmware upgrade it would boot up in about 1 second. It's not a big problem but its not the same as it was out of the box any ideas? Thanks Paul |
#12
|
|||
|
|||
![]()
Paul,
Mine takes a while to start up as well, not 10 seconds though. I might try and ask Spektrum to comment on the boot time (it does feel long). I will also check my DX8 and see if it is the same. Cheers, AP |
#13
|
||||
|
||||
![]()
Ok thanks a lot
Paul |
#14
|
|||
|
|||
![]()
Paul,
I did ask Spektrum about the boot time, apparently it is due to the additional complexity. The dx18 is similar to the 10t. FWIW I have been playing with the spam files, from bog the 8 and the 10t, the 10t's ones have a lot more stuff. Cheers, AP |
#15
|
||||
|
||||
![]() Quote:
Paul |
#16
|
|||
|
|||
![]()
I have a comment from someone in the know in Spektrum whom reckons 8 mixes are available on the DX10T.
Today I tried some stuff with the mixes on the radio, and documented how i did it: https://docs.google.com/file/d/0B6LW...it?usp=sharing I do know that whilst I can't see the mixes once I move them they do still work. Just not sure how many active ones I can have. Cheers, AP |
#17
|
||||
|
||||
![]()
Can't open the link, can any one else open it?
|
#18
|
|||
|
|||
![]()
Yes I can
|
#19
|
|||
|
|||
![]()
All,
As an alternative you can try downloading it from here: https://sites.google.com/site/txprof...edirects=0&d=1 Paul, I have just sent you a PM as well. Cheers, Andrew P |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|