RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Ag and Industrial Equipment and Buildings > Construction Equipment > Construction Equipment Tech

Construction Equipment Tech Hydraulics, Electronics, General Engineering, ect in constr equip


Reply
 
Thread Tools Display Modes
  #1  
Old 08-27-2017, 08:42 AM
SteinHDan SteinHDan is offline
Green Horn
 
Join Date: Sep 2015
Location: Oslo, Norway
Posts: 188
SteinHDan is on a distinguished road
Default Eagle 870k loader modifications: Light kit and more..

Hi,


I just wanted to share my modifications to my loader. I've not found anywhere that could help me when I added the light kit, so I though I could share my experiences here to maybe help others in the same situation. There might also be other modification later.

The loader as it looks originally:




I ordered the light kit with the loader, but it was not installed for me. It was all in a bag with really a lot of led lights and a control board. One sheet of paper in Chinese was the only supplied documentation.

I used the magic (IMHO) Google Translate app in camera mode to see what the documentation read.




I've used the same light setup as in the official Eagle Mach demo video:
- https://www.youtube.com/watch?v=7pDR8uSJ7TE



Adding the rear lights

The rear lights fit into holes in the cast iron rear ballast parts. But they did not fix in the hole, and I didn't want to glue them in, so I 3D-printed a part that fixes them in position. Also, the part is springy, so if I run into something that pushes the led into the housing, it will spring right back.

Steps to install the rear lights:
1. Remove the wheels (unscrew all screws in the outer circle of screws in the rim)
2. Remove the fender
3. Push the LEDs into position












Steps to install the front lights:
(you don't need to remove the cab, even if I did it here)
1. Thread the wires under the cab, along the hydraulic hoses and out on the sides
2. Take the light fixtures apart completely (unscrew all parts)
3. I had to drill the whole in the fixture a little larger to fit the 5mm led.
4. Thread the wires
5. Push the LEDs into the holes
6. Bend the LED wires into position
7. Screw everything back together




















Steps to install the cab lights:
1. Unscrew the two screws that go into the roof on each of the cab sides in the front, just above the doors
2. Unscrew the two screws that go down into the cab walls from the roof in the rear
3. Take off the roof
4. Push all the LEDs into their holes
4. (optional) If you have a rotating beacon, drill a hole in the roof. I also had to drill a wider hole to allow the nut to be close to the light, because the roof is so thick there were no threads to screw onto without the wider hole.
5. Fixed the wires to the roof using the supplied fixtures
6. Re-attach the roof











Done! :-)




The result:




https://youtu.be/4PCMgbxHJKI

Last edited by SteinHDan; 08-27-2017 at 02:09 PM.
Reply With Quote
  #2  
Old 08-27-2017, 09:29 AM
Efroeh Efroeh is offline
Wannabe
 
Join Date: May 2016
Location: sask canada
Posts: 310
Efroeh is on a distinguished road
Default Re: Eagle 870k loader modifications: Light kit and more..

Awesome job of explaining how to run the lights. Looks even better now.
Reply With Quote
  #3  
Old 08-27-2017, 12:06 PM
liftmys10 liftmys10 is offline
Apprentice
 
Join Date: Sep 2012
Location: Los Angeles, CA
Posts: 473
liftmys10 is on a distinguished road
Default Re: Eagle 870k loader modifications: Light kit and more..

Excellet!! Thank you. Even though I don't have this loader, the theory is the same for all.
Reply With Quote
  #4  
Old 08-27-2017, 05:36 PM
Northern Farmer's Avatar
Northern Farmer Northern Farmer is offline
Big Dawg On The Bone
 
Join Date: Jul 2015
Location: Montreal QC
Posts: 1,513
Northern Farmer is on a distinguished road
Thumbs up Re: Eagle 870k loader modifications: Light kit and more..

Awesome thanks for sharing with us. I'm sure it will help others out in the future
Reply With Quote
  #5  
Old 08-29-2017, 07:57 AM
Hofabooz's Avatar
Hofabooz Hofabooz is offline
Green Horn
 
Join Date: Feb 2012
Location: Far Moor Lancashire UK
Posts: 151
Hofabooz is on a distinguished road
Default Re: Eagle 870k loader modifications: Light kit and more..

Hi Stein

Nice work and thanks for taking the time to share with us all.
__________________
Regards

Mark

Over the Pond in the UK

Member of Ribble Valley Radio Controlled Truck Club

my weather station
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #6  
Old 08-29-2017, 08:54 AM
Rvjimd's Avatar
Rvjimd Rvjimd is offline
Craftsman
 
Join Date: Dec 2012
Location: Des Moines, Iowa
Posts: 884
Rvjimd is on a distinguished road
Default Re: Eagle 870k loader modifications: Light kit and more..

That is quite an involved procedure, no wonder they don't want to install them.

Nice job!
Reply With Quote
  #7  
Old 09-16-2017, 09:03 AM
benoitgr benoitgr is offline
Newbie
 
Join Date: May 2016
Location: Nice, France
Posts: 1
benoitgr is on a distinguished road
Default Re: Eagle 870k loader modifications: Light kit and more..

merci pour le partage
sa m'aidera pour mon montage
Reply With Quote
  #8  
Old 09-16-2017, 01:07 PM
Colin11123 Colin11123 is offline
Newbie
 
Join Date: Nov 2016
Posts: 29
Colin11123 is on a distinguished road
Default Re: Eagle 870k loader modifications: Light kit and more..

Nice job !

Mine should be here on Wednesday so getting the lights fitted will probably be the first job .. any chance you would share an STL for the LED holders ?

Already orders the tool steel to fabricate a set of forks for mine and working on the mechanism for the quick hitch now.
Reply With Quote
  #9  
Old 09-16-2017, 04:10 PM
SteinHDan SteinHDan is offline
Green Horn
 
Join Date: Sep 2015
Location: Oslo, Norway
Posts: 188
SteinHDan is on a distinguished road
Default Re: Eagle 870k loader modifications: Light kit and more..

Hi Colin11123!

.
Quote:
. any chance you would share an STL for the LED holders ?
Sure, here it is:
- LedSpringMount_12.5mm.stl


Best regards,
Stein :-)
Reply With Quote
  #10  
Old 09-16-2017, 04:13 PM
Colin11123 Colin11123 is offline
Newbie
 
Join Date: Nov 2016
Posts: 29
Colin11123 is on a distinguished road
Default Re: Eagle 870k loader modifications: Light kit and more..

Nice on thanks will get them printed tonight
Reply With Quote
  #11  
Old 11-20-2017, 07:39 PM
SteinHDan SteinHDan is offline
Green Horn
 
Join Date: Sep 2015
Location: Oslo, Norway
Posts: 188
SteinHDan is on a distinguished road
Default Re: Eagle 870k loader modifications: Light kit and more..

Have any of you seen snow chains for this loader? I'm sliding around on the snow and ice here in Norway now...

Best regards,
Stein :-)
Reply With Quote
  #12  
Old 11-20-2017, 07:47 PM
lenny lenny is offline
Green Horn
 
Join Date: Feb 2014
Location: Long Island N.Y
Posts: 204
lenny is on a distinguished road
Default Re: Eagle 870k loader modifications: Light kit and more..

Not that I have seen a set special for the 870k, I have seen the chains that go around the whole tire side wall and all. More for protection then traction I guess. Mite be creative time...
Reply With Quote
  #13  
Old 11-20-2017, 07:52 PM
Efroeh Efroeh is offline
Wannabe
 
Join Date: May 2016
Location: sask canada
Posts: 310
Efroeh is on a distinguished road
Default Re: Eagle 870k loader modifications: Light kit and more..

http://www.tobias-braeker.de/index.php?id=23

Not sure if they will fit the tires or not.
Reply With Quote
  #14  
Old 11-20-2017, 08:00 PM
Northern Farmer's Avatar
Northern Farmer Northern Farmer is offline
Big Dawg On The Bone
 
Join Date: Jul 2015
Location: Montreal QC
Posts: 1,513
Northern Farmer is on a distinguished road
Default Re: Eagle 870k loader modifications: Light kit and more..

Quote:
Originally Posted by SteinHDan View Post
Have any of you seen snow chains for this loader? I'm sliding around on the snow and ice here in Norway now...

Best regards,
Stein :-)
Have you tried contacting Tobias Braeker ? I know on his website it states that the chains only fit tires from 123mm-125mm but maybe he can make you a set for the 870K.

http://www.tobias-braeker.de/index.php?id=23
Reply With Quote
  #15  
Old 11-21-2017, 06:12 PM
SteinHDan SteinHDan is offline
Green Horn
 
Join Date: Sep 2015
Location: Oslo, Norway
Posts: 188
SteinHDan is on a distinguished road
Default Re: Eagle 870k loader modifications: Light kit and more..

Thanks guys, that's much appreciated!

Stein :-)
Reply With Quote
  #16  
Old 11-24-2017, 11:01 AM
TheBennyB TheBennyB is offline
Apprentice
 
Join Date: Apr 2016
Location: West Grove, PA
Posts: 437
TheBennyB is on a distinguished road
Default Re: Eagle 870k loader modifications: Light kit and more..

Not sure quarry chains are really going to help you unless they are well spaced. They'll just fill and freeze up. What you really need is a more aggressive tread on a softer compound tire. Wonder if some 1.9" crawler tire chains may work though?

https://www.ebay.com/itm/4-Black-1-1...QAAOxydlFSs7-4


https://www.ebay.com/itm/4-1-10-Scal...IAAOSwZaNaEAEh

Last edited by TheBennyB; 11-24-2017 at 11:11 AM.
Reply With Quote
  #17  
Old 11-24-2017, 12:51 PM
skeeter skeeter is offline
Big Dawg On The Bone
 
Join Date: Jul 2017
Location: Washington State
Posts: 1,732
skeeter is on a distinguished road
Default Re: Eagle 870k loader modifications: Light kit and more..

Quote:
Originally Posted by Northern Farmer View Post
Have you tried contacting Tobias Braeker ? I know on his website it states that the chains only fit tires from 123mm-125mm but maybe he can make you a set for the 870K.

http://www.tobias-braeker.de/index.php?id=23

Those tire chains there, they are what the steel mills use on the front loader that empties that slag pits. There's just enough protection from the molten metal that the rubber tires can survive long enough to scoop up a bucket of stuff & get out.
Reply With Quote
  #18  
Old 11-24-2017, 05:24 PM
SteinHDan SteinHDan is offline
Green Horn
 
Join Date: Sep 2015
Location: Oslo, Norway
Posts: 188
SteinHDan is on a distinguished road
Default Re: Eagle 870k loader modifications: Light kit and more..

Thanks again, buys. I agree on the mesh and I've also had a look at the crawler chains. Those look pretty good. But I fear even with those that it will be slippery. I'm contemplating to weave my own using ladder chain links and bending the ends another 90 degrees so that there will be a quite flat surface from the ladder chain against the rubber tire and then actual spikes (from the ends that stick out) that will grip on the ice.




Stein :-)
Reply With Quote
  #19  
Old 02-04-2019, 08:31 AM
SteinHDan SteinHDan is offline
Green Horn
 
Join Date: Sep 2015
Location: Oslo, Norway
Posts: 188
SteinHDan is on a distinguished road
Default Re: Eagle 870k loader modifications: Light kit and more..

Every time I run this loader, I get a little annoyed by the drive system. I think it has been beautifully crafted and it's really nice to look at, but it doesn't function like I want it too.

If I'm running in diff lock mode, it hurts the steering. If I run with free diffs, I don't really get the traction I want and one or two wheels are spinning. Also, there is so much slack in the drive train that you get really jerky movements when going downhill with bumps and the motor has to both push and pull all the time.

I don't really want to modify it, but I'm contemplating to replace the current drive mechanism with four gear motors, one in each wheel, like I have for my Bruder loader. I never have the traction issues on that one. I hate the idea of cutting into this beautiful model. But currently I'm not using it that much, because of the non-optimal function of the current drive train.

Any views?


Stein
Reply With Quote
  #20  
Old 02-04-2019, 12:10 PM
Lil Giants's Avatar
Lil Giants Lil Giants is offline
BANNED
 
Join Date: Aug 2010
Location: Saskatchewan
Posts: 4,431
Lil Giants has disabled reputation
Default Re: Eagle 870k loader modifications: Light kit and more..

Sell it - get a Fumotec WA500
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get!

Joe
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:10 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.