|
General Discussion A place to post off topic discussions. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Re: MORPOWER pump & valve
secound that. go to your local auto parts store they should have a easyout kit there cheap but come in way to handy not to have.
|
#2
|
||||
|
||||
Re: MORPOWER pump & valve
Quote:
Quote:
Tyler
__________________
~Tyler~
RockSolidCustoms |
#3
|
||||
|
||||
Re: MORPOWER pump & valve
No relief valve... that's probably why the 9amp current rating, that's when the oil flow stops & circles around the gears, producing the 20bar maximum.
Not difficult to make a prv or Fumotec/Vario have a nice tiny one already to go. Gears are quite thick & tall, much like the Jung, the pump could very well be in the 1L class, depending on the rpm of the motor. What's the servo make & model that's in there now? I look forward to your experiment findings Ed & Tyler.
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#4
|
|||
|
|||
Re: MORPOWER pump & valve
Joe it says they were made in Taiwan and a CE on them. Ed
|
#5
|
||||
|
||||
Re: MORPOWER pump & valve
I don't much care for those type fittins, can those be changed out to the Leimbach-type fittins.....or are they necessary for the pressure?
Aslo, what are the dimensions......it looks kinda big for my idea of putting one in a diecast tractor
__________________
Giving up is not an option!!! Rob |
#6
|
||||
|
||||
Re: MORPOWER pump & valve
You can't beat these fittings Rob, they're the best out there. It's super easy to remove the rubber hose vs cutting it from the barbed fitting that Leimbach uses. My 850 uses them throughout, I've had to remove a couple cyls for repairs, just unscrew the collar & easily pull the line off.
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#7
|
||||
|
||||
Re: MORPOWER pump & valve
Quote:
__________________
Giving up is not an option!!! Rob |
#8
|
||||
|
||||
Re: MORPOWER pump & valve
its new why should he have to go get parts.
let the company do it. he paid good money for a new part. being the broken parts were wrapped, i bet they over tighten it and just shipped it any way.
__________________
SKIP |
#9
|
|||
|
|||
Re: MORPOWER pump & valve
Rob those fittings are great, you can tighten them with a wrench and not a pair of pliers. They are not necessary for pressure. The valve body is 1 3x4 x 1 3/4 x 2 1/4 and 2 5/8 with the servo approximately. The only problem you might have is the thread size if you change the fittings, I don't know. Ed
|
#10
|
||||
|
||||
Re: MORPOWER pump & valve
Ed , do they give you some setup directions with the valves ? I'm curious if they come precentered
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#11
|
||||
|
||||
Re: MORPOWER pump & valve
Quote:
I also received an email from the company late last night apologizing for the damages and that they would send me out a complete new valve assembly today. The are sending a return postage with the other valve as well so no extra costs are on me. I'm sure they will have it here in the week or so as the other parts came in about that time. I will keep everyone updated as time goes but this company and its customer service is absolutely top notch so far. Tyler
__________________
~Tyler~
RockSolidCustoms |
#12
|
||||
|
||||
Re: MORPOWER pump & valve
Quote:
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#13
|
||||
|
||||
Re: MORPOWER pump & valve
Hey Ed did you get a quote on the 6 spool valve ?
I recentley purchased one of their 3 spool and tried to remove one of the fittings ....seems they are pretty fragile as I broke one of the fittins off ..Wasnt alot of force either ..I wont dare to try another..I am thinking they were glued in for extra sealing because the small nipple left behind would not budge and had to be drilled and tapped out |
#14
|
||||
|
||||
Re: MORPOWER pump & valve
I would put better servos on these I had some finicky 1s . A hiteck 85MG fits
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#15
|
||||
|
||||
Re: MORPOWER pump & valve
Have you used the valves yet Steve? Opinions????
|
#16
|
||||
|
||||
Re: MORPOWER pump & valve
Yes in my compactor . I slightly modified them a bit . I bored the feed and return out to accept 5mm fittings also helps with the flow . I'm using the Jung pump with them turned down low ( it's more pump then needed but I had it ) the only issue was the servos seemed weak sometimes would not move or move partially . IMO , it's bulky for a small model but fits well with the Jung in the 825C ( just )
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#17
|
|||
|
|||
Re: MORPOWER pump & valve
|
#18
|
|||
|
|||
Re: MORPOWER pump & valve
can send me a hydraulic valve drawings?thank you!
|
#19
|
|||
|
|||
Re: MORPOWER pump & valve
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|