RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Ag and Industrial Equipment and Buildings > Construction Equipment > Construction News

Construction News New kits & accessories offered in the world wide marketplace


Reply
 
Thread Tools Display Modes
  #1  
Old 05-05-2014, 08:30 AM
Crash Crash is offline
Newbie
 
Join Date: Apr 2014
Posts: 21
Crash is on a distinguished road
Default BareBones Excavators

I was looking for an excavator and came across this.

http://barebonesexcavators.com/products.html

This is 20lbs heavier at 63lbs than the 4200xl and bigger.
It will lift 80lbs
I am going to save up for this one.

Has anyone bought this?
I'd love to see one in action.
Reply With Quote
  #2  
Old 05-05-2014, 09:21 AM
ekim's Avatar
ekim ekim is offline
Green Horn
 
Join Date: Jan 2014
Location: Nampa Idaho
Posts: 177
ekim is on a distinguished road
Default Re: Found awesome excavator

Looks very promosing provided I can add all the components right.... My only concern would be for me to get the tracks fully functioning and a good hydro installed....
Reply With Quote
  #3  
Old 05-05-2014, 09:32 AM
Crash Crash is offline
Newbie
 
Join Date: Apr 2014
Posts: 21
Crash is on a distinguished road
Default Re: Found awesome excavator

I think they said you can put the 4200xl hydraulic kit in it so that would make it easier to get the parts all in one place.
rc4wd also has the modified radio for it.

I just love the size and weight, it should be able to out dig most any production model.

As for the track motors and turntable, that shouldn't be an issue , it's ready to just install your choice of motors
Reply With Quote
  #4  
Old 05-05-2014, 09:37 AM
Claus's Avatar
Claus Claus is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Hebron, In
Posts: 1,702
Claus is on a distinguished road
Default Re: Found awesome excavator

Looks very nice but also looks like a lot of work to get it going. There are no hydraulic lines on the boom. Wish the video and pictures would should a little more of how it's built. Surprised they don't sell a "finishing" kit.
Reply With Quote
  #5  
Old 05-05-2014, 09:57 AM
pigeonfarmboy's Avatar
pigeonfarmboy pigeonfarmboy is offline
Journeyman
 
Join Date: Apr 2011
Location: Monticello, IL
Posts: 647
pigeonfarmboy is on a distinguished road
Default Re: Found awesome excavator

It seems strange they don't have a working model. Definitely a good start though. I emailed them for availability. The price isn't bad at all for what you get.
Reply With Quote
  #6  
Old 05-05-2014, 10:38 AM
Claus's Avatar
Claus Claus is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Hebron, In
Posts: 1,702
Claus is on a distinguished road
Default Re: Found awesome excavator

When you look at some the build threads here on the Vario hoes (and other brands as well) I wonder if by the time you buy all the components the price of the BareBones is any cheaper. Maybe it can be built cheaper but the quality of parts will surly suffer.
Reply With Quote
  #7  
Old 05-05-2014, 12:05 PM
ekim's Avatar
ekim ekim is offline
Green Horn
 
Join Date: Jan 2014
Location: Nampa Idaho
Posts: 177
ekim is on a distinguished road
Default Re: Found awesome excavator

Same thought here Clause..... by the time I add up all the add ons is it really going to be more cost effective.....just not sure!
Reply With Quote
  #8  
Old 05-05-2014, 12:10 PM
ekim's Avatar
ekim ekim is offline
Green Horn
 
Join Date: Jan 2014
Location: Nampa Idaho
Posts: 177
ekim is on a distinguished road
Default Re: Found awesome excavator

Found this on you tube....

http://youtu.be/eSR272C7ITU
Reply With Quote
  #9  
Old 05-05-2014, 12:17 PM
Claus's Avatar
Claus Claus is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Hebron, In
Posts: 1,702
Claus is on a distinguished road
Default Re: Found awesome excavator

Quote:
Originally Posted by ekim View Post
Found this on you tube....

http://youtu.be/eSR272C7ITU

That video is on their website too, still doesn't show any provisions for any components. I wonder if for the track drives they just expect you to bolt gear head motors on? I hate the look of gear head motors hanging on the insides of the track sprockets.

Borrowing these photos form Azonic's Vario build, I love the way vario hid the drive motors in the track frames. Hopefully Barebones has something like this but I don't know. I'm reminded of the old saying "you get what you pay for".




Last edited by Claus; 05-05-2014 at 12:20 PM.
Reply With Quote
  #10  
Old 05-05-2014, 01:04 PM
avel avel is offline
Green Horn
 
Join Date: Mar 2014
Location: Kalispell, Montana
Posts: 228
avel is on a distinguished road
Default Re: Found awesome excavator

Interested.
Reply With Quote
  #11  
Old 05-05-2014, 02:33 PM
modelman modelman is offline
Craftsman
 
Join Date: Aug 2010
Location: Cullman Al.
Posts: 856
modelman is on a distinguished road
Default Re: Found awesome excavator

Crash-that is a strange video I personally would be very afraid of a machine that is shown NOT working. Probably made from junk!! Just my opinion.
Reply With Quote
  #12  
Old 05-05-2014, 02:50 PM
Lil Giants's Avatar
Lil Giants Lil Giants is offline
BANNED
 
Join Date: Aug 2010
Location: Saskatchewan
Posts: 4,431
Lil Giants has disabled reputation
Default Re: BareBones Excavators

It looks to be CNC cut parts, whether laser or waterjet, doesn't matter. But it's not designed around any particular components installation, and that will determine how much cutting & whacking you'll have to do to get it working.

The excavator itself is not going to lift 80lbs, but rather that may be the force the cyls are capable of at their maxium pressure... although they look like in the pics to be generic air cyls... so one might as well build their own so they look & function more prototypical and the fittings be in the correct locations.

$1500 is not a bad starting point, the hard part of CAD & laser cut parts is done.

I see on their site that they are considering to design a front shovel & I would certainly be interested in buying a shell of that model.
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get!

Joe
Reply With Quote
  #13  
Old 05-05-2014, 07:13 PM
fhhhstix's Avatar
fhhhstix fhhhstix is offline
Out of control
 
Join Date: Aug 2010
Location: Kirklin IN.
Posts: 3,788
fhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud of
Default Re: BareBones Excavators

I have tried both sending them a message and phone calls but no answer yet so I guess we will have to see if it is legit first. If it is it does seem like a great start to an excavator. The price does have me a little sceptical as well as no video of one working under its own power.

Travis
__________________
AKA "00" Biddle


RIP FreddyGearDrive 2-12-59/12-19-11
Reply With Quote
  #14  
Old 05-05-2014, 07:33 PM
Dieselchopper's Avatar
Dieselchopper Dieselchopper is offline
Green Horn
 
Join Date: Oct 2012
Location: Estevan, Saskatchewan, Canada
Posts: 274
Dieselchopper is on a distinguished road
Default Re: BareBones Excavators

I too will be following them for a shovel. Looks promising.
Reply With Quote
  #15  
Old 05-05-2014, 07:46 PM
ihbuilder's Avatar
ihbuilder ihbuilder is offline
Fabrication and design , super moderator
 
Join Date: Aug 2010
Location: in a cage in Auburn,PA
Posts: 3,557
ihbuilder is a jewel in the roughihbuilder is a jewel in the roughihbuilder is a jewel in the roughihbuilder is a jewel in the rough
Default Re: BareBones Excavators

I tried calling too no answer . If legit , it would seem a side deal that father and son went together and got a bunch run at 1 time . I'm concerned with the way the carbody and track frame mates . Bearing assm. or a bolt like Don cambles models
__________________
RIP FreddyGearDrive 2-12-59/12-19-11

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #16  
Old 05-05-2014, 07:53 PM
Cooper's Avatar
Cooper Cooper is offline
Big Dawg On The Bone
 
Join Date: Oct 2013
Location: Watsontown, Pa
Posts: 2,119
Cooper is on a distinguished road
Default Re: BareBones Excavators

I'm interested in what you guys find out, keep us posted. For me this is what I'm looking for. As I don't have the ability to cut odd shaped parts. No cnc but can do all the other stuff. And yes I would rather not even have the cylinders.
__________________
Always wasting money, as the wife says.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #17  
Old 05-05-2014, 09:04 PM
RCP57's Avatar
RCP57 RCP57 is offline
Big Dawg On The Bone
 
Join Date: Mar 2011
Location: Vancouver Island
Posts: 3,677
RCP57 is on a distinguished road
Default Re: BareBones Excavators

$1500US is a lot of money for a skeleton if it isn't set up to fit certain drive and swing motors or like Steve said, doesn't have a swing bearing. Looks like the tracks are bolted onto some sort of roller chain which isn't a bad thing but definitely isn't as nice as cast pads(look carefully and you will see some are mounted crooked). I wonder if it has a tensioner on the tracks or if they are fixed? I can see this costing as much as an RTR RC4WD hoe by the time its working. Maybe it's a good score? I guess if someone gets a call back from them then we will get some answers!
Reply With Quote
  #18  
Old 05-05-2014, 09:41 PM
Supermario's Avatar
Supermario Supermario is offline
Big Dawg On The Bone
 
Join Date: Apr 2012
Location: Sault Ste Marie
Posts: 2,039
Supermario is on a distinguished road
Default Re: BareBones Excavators

I watched the video. safe to say I've watched a few hundred hours of Rc equipment on YouTube but this is the first time I've ever seen a guy manually dig like that! what exactly did he think that was demonstrating?

I understand they may not be in the hydraulic and electronics business and just the metal but ya gotta show people the machine in Rc action right?
Reply With Quote
  #19  
Old 05-05-2014, 10:08 PM
Claus's Avatar
Claus Claus is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Hebron, In
Posts: 1,702
Claus is on a distinguished road
Default Re: BareBones Excavators

Quote:
Originally Posted by Supermario View Post
I watched the video. safe to say I've watched a few hundred hours of Rc equipment on YouTube but this is the first time I've ever seen a guy manually dig like that! what exactly did he think that was demonstrating?

I understand they may not be in the hydraulic and electronics business and just the metal but ya gotta show people the machine in Rc action right?
Mario I would have been much more confident in the machine if He would have made some engine noises with His mouth while doing the play digging. Maybe a vrooom, vrooom!! or a Grrrhhh, Grrrhhh!

Last edited by Claus; 05-05-2014 at 10:11 PM.
Reply With Quote
  #20  
Old 05-05-2014, 10:15 PM
Supermario's Avatar
Supermario Supermario is offline
Big Dawg On The Bone
 
Join Date: Apr 2012
Location: Sault Ste Marie
Posts: 2,039
Supermario is on a distinguished road
Default Re: BareBones Excavators

Quote:
Originally Posted by Claus View Post
Mario I would have been much more confident in the machine if He would have made some engine noises with His mouth while doing the play digging. Maybe a vrooom, vrooom!! or a Grrrhhh, Grrrhhh!
Agreed!! Sounds like 80lbs for sure!
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:32 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.