RC Truck and Construction  

Go Back   RC Truck and Construction > RC Tech section. > Mechanical tech

Mechanical tech This is for the mechanical parts of a model. Gear reductions, Axles, Transmissions, General drive line


Reply
 
Thread Tools Display Modes
  #1  
Old 04-14-2020, 01:11 PM
malawicarsten malawicarsten is offline
Newbie
 
Join Date: Jan 2019
Location: Denmark
Posts: 20
malawicarsten is on a distinguished road
Default Leimbach pistons repair on 966G

Hi

I got hold of some repair kits for my Leimbach pistons on my Wedico 966G as they are leaking badly with oil.

Anyone ever tried to fix these as I can't find any guides or similar online?

Best Regards

Carsten
Reply With Quote
  #2  
Old 04-21-2020, 04:25 PM
Actros4160's Avatar
Actros4160 Actros4160 is offline
Newbie
 
Join Date: Aug 2013
Location: Columbus, GA
Posts: 127
Actros4160 is on a distinguished road
Default Re: Leimbach pistons repair on 966G

I did my Cylinders and valve overhauling after 10years on my Cat345 and I needed to send this to Thicon-Models in Germany because Leimbach would not deal with foreign country's.

Bernd
Reply With Quote
  #3  
Old 01-22-2021, 06:19 PM
liftmys10 liftmys10 is offline
Apprentice
 
Join Date: Sep 2012
Location: Los Angeles, CA
Posts: 473
liftmys10 is on a distinguished road
Default Re: Leimbach pistons repair on 966G

I'm in the same situation. My 996g is leaking on one of the steering cylinder. It's a newer production machine with very little use too. I had a second older 966g machine with a very early production # and that did not leak at all... go figure.
So any info on how to proceed with rebuilding would be appreciated.
Reply With Quote
  #4  
Old 01-23-2021, 07:20 AM
egronvold's Avatar
egronvold egronvold is offline
Big Dawg On The Bone
 
Join Date: Dec 2010
Location: Conshohocken, PA
Posts: 1,445
egronvold is on a distinguished road
Default Re: Leimbach pistons repair on 966G

Check with PMD Gardentrucking, they might have the repair kit from Leimbach with the different o-rings needed.
__________________
Emil G | MFZ Blocher Fendt 926 | RC4WD Volvo EC480 excavator | Carson LR 634 | Kenworth 6x6 hauler | Kenworth 6x6 dtrk
My channel:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Construction site on Facebook:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Pictures on Instagram:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #5  
Old 01-23-2021, 07:24 AM
egronvold's Avatar
egronvold egronvold is offline
Big Dawg On The Bone
 
Join Date: Dec 2010
Location: Conshohocken, PA
Posts: 1,445
egronvold is on a distinguished road
Default Re: Leimbach pistons repair on 966G

As for opening them, you should remove all fittings and put it in a vice, then gently twist the top/ top part off.
__________________
Emil G | MFZ Blocher Fendt 926 | RC4WD Volvo EC480 excavator | Carson LR 634 | Kenworth 6x6 hauler | Kenworth 6x6 dtrk
My channel:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Construction site on Facebook:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Pictures on Instagram:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #6  
Old 01-23-2021, 12:37 PM
liftmys10 liftmys10 is offline
Apprentice
 
Join Date: Sep 2012
Location: Los Angeles, CA
Posts: 473
liftmys10 is on a distinguished road
Default Re: Leimbach pistons repair on 966G

Thanks all. Joe also gave me a few tips and mentioned leimbach uses glue to seal the top cap. Has anyone found a source for the orings?
Reply With Quote
  #7  
Old 01-23-2021, 01:58 PM
malawicarsten malawicarsten is offline
Newbie
 
Join Date: Jan 2019
Location: Denmark
Posts: 20
malawicarsten is on a distinguished road
Default Re: Leimbach pistons repair on 966G

Hi
The numbers I know are:
30186-W or EHZW006 for steering cylinders
30188-w or ehzw007 for lifting arms and the showel tip

Numbers are from my empty bags I saved in case I needed more.

On bag the ehzwxxx seems to be leimbach number and the other from THicon
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:58 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.