|
Highway Trucks and Trailers On road trucks and trailers single and twin axle trucks. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Mack R model ten wheeler dump
After the carson lift flop with my full frame trailer I decided to build a R model dump truck. It will be all business just like the old Mack's were. This is based off a early R model in the 66'-72' short cab model. It will have the old square fuel tanks and a straight stack. I started building a cab visor and battery boxes and should have the fuel tanks done tomorrow. Another mod will be adding a few heavy leafs in the rear springs to support the weight of a good load of dirt.
Built on a king hauler frame, front axel moved forward, motor and trans relocated forward over the servos, I used the Carson lift and motor placed in the frame center where the esc and RX will also live. I used a rc4wd driveshaft end to connect the lift motor and screw drive. The battery will live under the hood/cab where it can be easily accessed as the cab and hood pivot up and out of the way at the front bumper. Rc4wd budd rims for now but may switch over to spokes. Rc4wd metal driveline with carrier bearing due to length of driveshaft between trans and first axel... Thanks for looking |
#2
|
||||
|
||||
Re: Mack R model ten wheeler dump
Yup, that reminds me of my old 88 RD Mack.
Cheer's, Neil. |
#3
|
||||
|
||||
Re: Mack R model ten wheeler dump
Excellent start
__________________
Brian Finster shavin' and smokin' a cigar?!?! |
#4
|
||||
|
||||
Re: Mack R model ten wheeler dump
This is awesome
|
#5
|
||||
|
||||
Re: Mack R model ten wheeler dump
Did you scratch build that cab? That looks nice. I'm really interested to hear your thoughts on that Carson screw drive. I've been considering one for a dump trailer. I'm curious to know how well it performs.
__________________
Nathan |
#6
|
||||
|
||||
Re: Mack R model ten wheeler dump
Keeping an eye on this build.....is that a lesu lift mechanism?
Alfy
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Always Wheeling, Always Dealing ! |
#7
|
||||
|
||||
Re: Mack R model ten wheeler dump
I bought the mack cab 2nd hand. Not sure where it was made. Im impressed with it.The lift might be a knock off by lesu...i got it on ebay from joes ...it works nice and smooth and seams suited better suited for short box 6 or 10 wheeler end dumps. When installing You have to find the "sweet spot" in the frame to bolt it in. Bolted in To far forward it will not lift the box very high. To far rearward and I question the strain it would see trying to lift the load. I mounted mine between the axels to get good hight and good leverage. Where it's mounted it sits about 15mm above the frame rail so that it clears the axels and allows them to articulate? This is ok because the tires will extend about 5 mm above the rails. Here are some pics focust on the lift.
|
#8
|
||||
|
||||
Re: Mack R model ten wheeler dump
65 degree's is super!!!!! My 1:1 Mack only has 42 degrees, hence having to have, a vibrator. Don't start me on the joke's, I have a few too! lol!
Cheer's, Neil. |
#9
|
||||
|
||||
Re: Mack R model ten wheeler dump
ill be watching this one!
__________________
Rc's are like pringles. You can't have just one!! my YouTube is - To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Subscribe!! My Facebook - To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#10
|
||||
|
||||
Re: Mack R model ten wheeler dump
I kinda got lucky with the amount of angle....If I moved it any further forward between the axels it would come into contact with the top of the forward tandem axel and then the box in the lowered position would have to sit another 5mm higher off the frame. If I placed it in front of the forward tandem I would not get as steep of an angle I think it was under 45 iirc...I want this thing to dump and it all slide out. My next hurdle will be an automatic tailgate lock. I want it to release as the box goes up and lock just as it lowers.. I have an idea but want to mount the bed first...
|
#11
|
||||
|
||||
Re: Mack R model ten wheeler dump
nice old mack ..great to see this truck build
__________________
owner/operator.."got to operate to own" dwayne |
#12
|
||||
|
||||
Re: Mack R model ten wheeler dump
That's a nice angle, No need for vibrators
|
#13
|
||||
|
||||
Re: Mack R model ten wheeler dump
The cab looks like one of the ones I got from www.shapeways.com
http://www.shapeways.com/model/10643...s&materialId=6 Try that one, thhey're pretty good and incredibly tough. |
#14
|
||||
|
||||
Re: Mack R model ten wheeler dump
Looking great! I will be keeping an eye on this build!!
Tim |
#15
|
||||
|
||||
Re: Mack R model ten wheeler dump
Quote:
|
#16
|
||||
|
||||
Re: Mack R model ten wheeler dump
Got some more Plastic work done tonight...started on the fuel tanks and added some detail to the battery boxes. The fuel tanks will get covered in some diamond plate. I just wanted a solid thick plastic to make a sturdy tank that will hold up to abuse.
Sadly my local hobby shop closed a few weeks back. I have to order some more plastic on line now and wait for supplies to ship to me by end of this week... |
#17
|
||||
|
||||
Re: Mack R model ten wheeler dump
Looking good! Keep it going Mack Attack!
__________________
Nathan |
#18
|
|||
|
|||
Re: Mack R model ten wheeler dump
Hurry up I want to see this bad boy done! looks good
|
#19
|
||||
|
||||
Re: Mack R model ten wheeler dump
Hey nice truck, I am currently working on a king hauler dump I was wondering where are you going to put the battery? i ended up making my lift mechanism for the dump body almost the same as yours but I made the motor pivot so I did not need to use a universal joint.
|
#20
|
||||
|
||||
Re: Mack R model ten wheeler dump
Aren't you don't with it yet??
__________________
Hi my name is Aaron.... And i'm a truckaholic! |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|