|
|
|||||||
| Highway Trucks and Trailers On road trucks and trailers single and twin axle trucks. |
 |
|
|
Thread Tools | Display Modes |
|
#1
01-15-2012, 06:35 PM
|
||||
|
||||
Another Globe Liner Build
It seems Like the Globe Liner is the flavor of the month these days. So here is another. I've been planing for this build for a while now. I'm starting out with drilling out and taping out a new set of frame rails. I originally I had a set of FGD frames on order with a taper, but sad to say the unfortunate happened. I also ordered a aluminum taper off of EBay (which I wasn't to happy buying from China) lack of choice kinda forced me. I used my stock GL frame rails as temps. for the blank rails. The second pics show my goody box of Russ's parts ( air ride susp. , ez stacks, aluminum bumper).
Last edited by Bsorenson79; 01-15-2012 at 10:56 PM. 
|
|
#2
01-15-2012, 07:06 PM
|
||||
|
||||
|
Re: Another Globe Liner Build
Look's like you're off to a good start. I'm kind of partial to the globe, and i'm planning on re-doing her.
And you're going to love the air ride...I do.  Can't wait to see more. Big John
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. YOU WANTED THE BEST AND YOU GOT THE BEST THE HOTTEST BAND IN THE WORLD...KISS!!!!
|
|
#4
01-15-2012, 10:58 PM
|
||||
|
||||
|
Re: Another Globe Liner Build
Quote:
|
|
#5
01-15-2012, 11:06 PM
|
||||
|
||||
|
Re: Another Globe Liner Build
If you see the image tags underneath your photos, on photobucket, just click on the one that starts and ends with IMG tags. It should copy the address automatically, but if not, right click and select copy. Then just paste that address, with the IMG tags into your post. Do that by right clicking and selecting paste. Hope this helps!
__________________
Nathan
|
|
#6
01-22-2012, 05:36 PM
|
||||
|
||||
|
Re: Another Globe Liner Build
Today I got Russ's Air Ride set up and installed the axles. As of now I didn't put springs on the inside of the bags. I did get to my local hardware store and picked up a bunch of spring with different tensions. I also have to figure out the length I have to make the springs for the truck to sit right. Also if you look at the pics I used different nuts on the front and back axle mounts. I'm gonna use all lock nuts ( just ran short). But it's driving me crazy that the bolts don't match.
|
|
#7
01-22-2012, 11:16 PM
|
||||
|
||||
|
Re: Another Globe Liner Build
Doesn't the air ride look sweet??? Can't wait to see more.
  Big John
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. YOU WANTED THE BEST AND YOU GOT THE BEST THE HOTTEST BAND IN THE WORLD...KISS!!!!
|
|
#8
01-25-2012, 12:57 PM
|
||||
|
||||
|
Re: Another Globe Liner Build
Fantastic start and some incredible goodies to on there. Well done!
Just wondering though, why no cross members? Besides the front and rear bumper mounts and servo mounts, All that is holding the chassis frame rails together is the rear suspension. Won't there be a lot of chassis flex?
__________________
Never judge a man until you have walked a mile in his shoes. Then, when you judge him, you are a mile away and you have his shoes! To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
#9
01-25-2012, 05:31 PM
|
||||
|
||||
|
Re: Another Globe Liner Build
Quote:
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
