RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Ag and Industrial Equipment and Buildings > Construction Equipment

Construction Equipment If it digs, pushes, hauls dirt "off road" post it here.


Reply
 
Thread Tools Display Modes
  #21  
Old 04-29-2022, 05:29 PM
kerst's Avatar
kerst kerst is offline
Apprentice
 
Join Date: Oct 2010
Location: NY
Posts: 471
kerst is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

Here two pictures of the front and how the RC gear is fitted in



and her with the cab:



Kerst
Reply With Quote
  #22  
Old 04-29-2022, 07:38 PM
Mikem Mikem is offline
Journeyman
 
Join Date: Mar 2013
Location: Ontario
Posts: 705
Mikem is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

Those seats look hard ! Looks great
Reply With Quote
  #23  
Old 05-14-2022, 03:52 PM
kerst's Avatar
kerst kerst is offline
Apprentice
 
Join Date: Oct 2010
Location: NY
Posts: 471
kerst is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

I did a little photo shoot today.











The carrier is getting there. It looks a bit lopsided (leaning forward) , but that is because the suspension is sprung and there is less weight in the back, but that will change.
The outriggers are still missing and quite a few details.

Kerst
Reply With Quote
  #24  
Old 06-25-2022, 03:58 PM
kerst's Avatar
kerst kerst is offline
Apprentice
 
Join Date: Oct 2010
Location: NY
Posts: 471
kerst is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

It is summer and I spend more time outside, but I still managed to make some progress. I just finished the outriggers. I made the beams from 24 gauge galvanized steel, soldered together in an elaborate jig. They turned out quite nice.

.

The jacks are hand operated. They are too small for any motorized solutions, so just M4 screws.





I also made the slewing ring, which is visible in this picture:



Next is the boom. I will try to make it out of 24 gauge galvanized steel as well. See how that works out!

Kerst
Reply With Quote
  #25  
Old 06-25-2022, 06:24 PM
Zabco Zabco is offline
Green Horn
 
Join Date: Sep 2016
Location: Ohio
Posts: 233
Zabco is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

Very nice work. Am enjoying watching your build.
Reply With Quote
  #26  
Old 09-20-2022, 06:58 PM
kerst's Avatar
kerst kerst is offline
Apprentice
 
Join Date: Oct 2010
Location: NY
Posts: 471
kerst is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

Progress has been slow during the summer. Lots of other distractions. But I managed to work on the boom. After a few trials the best solution was 26 gauge galvanized steel soldered together. It worked surprisingly well. I have a good brake, which makes it easy, but precision is important. I filed the pieces exactly straight, then did some trails to get the measurements right before bending the 2 halves of each section and joining them together. One more section to go then I can install the mechanics.











Kerst
Reply With Quote
  #27  
Old 12-28-2022, 07:13 AM
kerst's Avatar
kerst kerst is offline
Apprentice
 
Join Date: Oct 2010
Location: NY
Posts: 471
kerst is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

The boom is ready, except for some cleaning up.


I had some gearbox and axle trouble.


but theses seem to have been resolved, fingers crossed! All functions work now.


Kerst
Reply With Quote
  #28  
Old 12-28-2022, 12:02 PM
jerry56 jerry56 is offline
Journeyman
 
Join Date: Apr 2019
Location: WV Panhandle
Posts: 740
jerry56 is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

How do you plan to get the out riggers out and then down...?
Fantastic work by the way...
Reply With Quote
  #29  
Old 12-29-2022, 06:45 AM
kerst's Avatar
kerst kerst is offline
Apprentice
 
Join Date: Oct 2010
Location: NY
Posts: 471
kerst is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

Quote:
Originally Posted by jerry56 View Post
How do you plan to get the out riggers out and then down...?
Fantastic work by the way...
Thanks! The outriggers have screws and are operated by hand.

Kerst
Reply With Quote
  #30  
Old 12-29-2022, 06:31 PM
Zabco Zabco is offline
Green Horn
 
Join Date: Sep 2016
Location: Ohio
Posts: 233
Zabco is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

Very nice work as usual, sir. How did you form up your boom sections? Do you use anything to reduce friction between the boom sections?
Reply With Quote
  #31  
Old 12-30-2022, 01:54 PM
kerst's Avatar
kerst kerst is offline
Apprentice
 
Join Date: Oct 2010
Location: NY
Posts: 471
kerst is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

Quote:
Originally Posted by Zabco View Post
Very nice work as usual, sir. How did you form up your boom sections? Do you use anything to reduce friction between the boom sections?
Thanks! I have a pretty substantial brake, which I bought for the LTM1800 and it does good job forming the boom. Each section has two parts (bottom and top) and they soldered together. I did several test runs with short pieces to get the bending just right.
I will use Teflon tape to reduce friction between the sections.

Kerst
Reply With Quote
  #32  
Old 01-02-2023, 10:15 PM
frizzen's Avatar
frizzen frizzen is offline
Big Dawg On The Bone
 
Join Date: Jan 2016
Location: indy, indiana
Posts: 1,991
frizzen is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

Beautiful workmanship!

This just keeps getting more impressive. Plus the longer i look at a chassis picture, the more functions i'm seeing. I love the boom, outriggers, and that you were able to get an interior into that!

Am i seeing a 2 speed trans?
__________________
What do ya mean "Cars are neither Trucks or Construction"?
It's still scale, and i play fairly well with others, most of the time...
Reply With Quote
  #33  
Old 03-05-2023, 07:22 PM
kerst's Avatar
kerst kerst is offline
Apprentice
 
Join Date: Oct 2010
Location: NY
Posts: 471
kerst is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

During the past two months I have been working on the upper. I made the frame and worked on the boom hoist cylinders, the swing and the winch.
The boom cylinders will have spindles and all the components are there, but it all needs to be fitted. I managed to fit the motor right behind the mechanism in the upper. Hopefully the motor will be strong enough. If not I have to redesign everything.



Here are some parts of the spindle and gears for the boom hoist:


The swing motor with an override clutch:


the winch and the motor:


And here with the motor assembled:


I plan to have 4 speed controls in the upper and maybe there is a space for a battery. We will see!

Kerst
Reply With Quote
  #34  
Old 03-06-2023, 03:39 PM
ddmckee54 ddmckee54 is offline
Green Horn
 
Join Date: Dec 2011
Posts: 227
ddmckee54 is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

At 1/24 scale I realize that you're not going to be lifting any thing heavy. Will the gearbox drag be enough to hold the load when doing a lift? Will the boom extend/retract be manual like the outriggers, or will it be powered?

Don

Last edited by ddmckee54; 03-06-2023 at 03:42 PM.
Reply With Quote
  #35  
Old 03-06-2023, 08:17 PM
kerst's Avatar
kerst kerst is offline
Apprentice
 
Join Date: Oct 2010
Location: NY
Posts: 471
kerst is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

Quote:
Originally Posted by ddmckee54 View Post
At 1/24 scale I realize that you're not going to be lifting any thing heavy. Will the gearbox drag be enough to hold the load when doing a lift? Will the boom extend/retract be manual like the outriggers, or will it be powered?

Don
I tried the winch and it seems to have enough braking action. I plan to lift loads till the crane tips (under controlled circumstances)
The boom telescopes with a spindle and cables. the motor sits in the boom.
The outriggers are manual; it get too small there.

Kerst
Reply With Quote
  #36  
Old 05-04-2023, 12:48 PM
kerst's Avatar
kerst kerst is offline
Apprentice
 
Join Date: Oct 2010
Location: NY
Posts: 471
kerst is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

During the past 2 months I have made good progress.
Once all the functions were in place it was time to organize the upper. Luckily there is some space, because the motors take very little space. And I have space for a battery, which will power both the upper and the carrier.
I created two different setups for one transmitter/receiver and it seems to work!!!!
The receiver will be housed in the counterweight.







Next is fitting all the RC bits efficiently in the upper and finish the covers, then I will build the cab.

Kerst
Reply With Quote
  #37  
Old 05-05-2023, 05:23 PM
ddmckee54 ddmckee54 is offline
Green Horn
 
Join Date: Dec 2011
Posts: 227
ddmckee54 is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

When you solder things together are you using soft solder, or silver solder?

What size are the screws you're using to lift the boom?
Reply With Quote
  #38  
Old 05-06-2023, 09:09 AM
jerry56 jerry56 is offline
Journeyman
 
Join Date: Apr 2019
Location: WV Panhandle
Posts: 740
jerry56 is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

This is really looking good....
I se you used an N20 motor and what looks like a 180 can gear motor.... I wouldn't have thought they would have the power you need for something this heavy...makes me re-think some of my future builds in terms of motors to use...
Reply With Quote
  #39  
Old 05-06-2023, 11:39 AM
kerst's Avatar
kerst kerst is offline
Apprentice
 
Join Date: Oct 2010
Location: NY
Posts: 471
kerst is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

Quote:
Originally Posted by ddmckee54 View Post
When you solder things together are you using soft solder, or silver solder?

What size are the screws you're using to lift the boom?
I used silver solder.
And the size of the trapezoidal thread is 6 x 2mm
https://www.ebay.com/itm/302465758278?var=601294075008

Kerst
Reply With Quote
  #40  
Old 05-08-2023, 05:12 PM
ddmckee54 ddmckee54 is offline
Green Horn
 
Join Date: Dec 2011
Posts: 227
ddmckee54 is on a distinguished road
Default Re: Liebherr LTM 1055 S-4 in scale 1/24

I believe that earlier you said that you were using 26 gauge galvanized sheet metal to form to parts of the boom sections. Since you silver soldered these parts, I've got a few questions:
1) How did you strip the galvanizing off before you silver soldered the parts together?
2) The upper and lower parts of the boom sections look like they are held together with a butt joint. How did you keep the parts aligned as you silver soldered them? (Those are some long joints.)
3) What silver solder did you use, and what flux?
4) What torch did you use for the 26 gauge material?

I've been looking for small lead-screws for one of the projects I've got on the back burner. I know that they make lead-screws down to a 2mm diameter, but I haven't been able to find a seller with both the lead-screw and the lead-nut. Al least not at a price that I am willing to pay for a hobby item. I can find one, or the other, but not both at the same supplier.

I hesitate to order from 2 different sellers, as some sellers can be "less than accurate" in their descriptions.

Don

Last edited by ddmckee54; 05-08-2023 at 05:17 PM.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:47 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.