RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Ag and Industrial Equipment and Buildings > Construction Equipment > Construction Equipment Tech

Construction Equipment Tech Hydraulics, Electronics, General Engineering, ect in constr equip


Reply
 
Thread Tools Display Modes
  #1  
Old 10-22-2010, 03:24 PM
dirtpusher9's Avatar
dirtpusher9 dirtpusher9 is offline
Moderator
 
Join Date: Aug 2010
Location: Texas
Posts: 457
dirtpusher9 has a spectacular aura aboutdirtpusher9 has a spectacular aura about
Default Machinist opinion

You mods need to make this a sticky. That way we can ask our machinist members questions when we need to, what do you say.

My question is, what stainless would be good to make these hydraulic cylinders that will polish out well and machine well also? For example (303 /416 what?????)
__________________
Joe
Reply With Quote
  #2  
Old 10-22-2010, 03:35 PM
pugs pugs is offline
Wannabe
 
Join Date: Sep 2010
Location: Central Wisconsin
Posts: 368
pugs is on a distinguished road
Default Re: Machinist opinion

303 is the easier machine grade of 304 (welding grade). The 316 isn't that difficult to machine and would probably give you a better polished finish and stay that way longer. Biggest thing when machining any stainless is not to let the tool dwell in any one spot, will work harden and be a bear to get through.
__________________
Jeff
Reply With Quote
  #3  
Old 10-22-2010, 03:48 PM
dirtpusher9's Avatar
dirtpusher9 dirtpusher9 is offline
Moderator
 
Join Date: Aug 2010
Location: Texas
Posts: 457
dirtpusher9 has a spectacular aura aboutdirtpusher9 has a spectacular aura about
Default Re: Machinist opinion

Ok thanks Jeff, I read somewhere on a site that the 301 had a nice finish to it, is that true.
__________________
Joe
Reply With Quote
  #4  
Old 10-22-2010, 04:46 PM
ihbuilder's Avatar
ihbuilder ihbuilder is offline
Fabrication and design , super moderator
 
Join Date: Aug 2010
Location: in a cage in Auburn,PA
Posts: 3,557
ihbuilder is a jewel in the roughihbuilder is a jewel in the roughihbuilder is a jewel in the roughihbuilder is a jewel in the rough
Default Re: Machinist opinion

Joe , I got 304 ss , it has a nice finish to it . As soon as I get this batch off my lathe I'll make my barrels . my tube just needs a little hone work not much .

IHSteve
__________________
RIP FreddyGearDrive 2-12-59/12-19-11

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #5  
Old 10-22-2010, 05:05 PM
pugs pugs is offline
Wannabe
 
Join Date: Sep 2010
Location: Central Wisconsin
Posts: 368
pugs is on a distinguished road
Default Re: Machinist opinion

I haven't done any 301 so wouldn't be able to say, haven't ever run across any either.
__________________
Jeff
Reply With Quote
  #6  
Old 10-22-2010, 06:03 PM
dirtpusher9's Avatar
dirtpusher9 dirtpusher9 is offline
Moderator
 
Join Date: Aug 2010
Location: Texas
Posts: 457
dirtpusher9 has a spectacular aura aboutdirtpusher9 has a spectacular aura about
Default Re: Machinist opinion

From the looks of it the 301 may be just in sheet form.

Thanks Steve and Jeff, don't work with stainless hardly at all.

Ps. Thanks to the mod that stuck this....
__________________
Joe
Reply With Quote
  #7  
Old 10-22-2010, 06:18 PM
JAMMER JAMMER is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Liverpool New York
Posts: 1,346
JAMMER is on a distinguished road
Default Re: Machinist opinion

Joe I use 304 seamless stainless for cylinders. Ed
Reply With Quote
  #8  
Old 11-08-2010, 09:04 PM
td9clyde td9clyde is offline
Dozer Builder
 
Join Date: Aug 2010
Location: Keystone, IN
Posts: 728
td9clyde will become famous soon enoughtd9clyde will become famous soon enough
Default Re: Machinist opinion

ok how do i or what shape of tool do i need to cut the inside groove for the o rings at the end of a cylinder?
__________________
I built this thing and have it working now what do I do with it?
Reply With Quote
  #9  
Old 11-08-2010, 09:10 PM
ihbuilder's Avatar
ihbuilder ihbuilder is offline
Fabrication and design , super moderator
 
Join Date: Aug 2010
Location: in a cage in Auburn,PA
Posts: 3,557
ihbuilder is a jewel in the roughihbuilder is a jewel in the roughihbuilder is a jewel in the roughihbuilder is a jewel in the rough
Default Re: Machinist opinion

Quote:
Originally Posted by td9clyde View Post
ok how do i or what shape of tool do i need to cut the inside groove for the o rings at the end of a cylinder?
Clyde look through this page should help you out

http://www.mcmaster.com/#lathe-tools/=9mwz3s
__________________
RIP FreddyGearDrive 2-12-59/12-19-11

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #10  
Old 09-29-2011, 10:18 PM
johnboyee johnboyee is offline
Newbie
 
Join Date: Oct 2010
Posts: 22
johnboyee is on a distinguished road
Default Re: Machinist opinion

quick question..i have the hot rod harbor freight mini mill X2, and was wondering which cnc conversion was the best choice..ive seen acouple, jus not sure which route would be best?
Reply With Quote
  #11  
Old 10-01-2011, 03:24 AM
dadandlad dadandlad is offline
Newbie
 
Join Date: Feb 2011
Posts: 33
dadandlad is on a distinguished road
Default Re: Machinist opinion

Clyde
The groove for the O-ring is square no need to be rounded,just ensure you dont make the groove too tight width ways, you have to allow room for the o-ring to compress.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:41 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.