|
Construction Equipment If it digs, pushes, hauls dirt "off road" post it here. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Re: 3D Printed CAT 963K Track Loader w/Raspberry Pi Control
Rexracer 19,
Can you post a link to where you bought the 3/16 grooved Clevis pins please. Followed the link over on the D10b3d print build but they do not seem to have them any more. Appreciate any help locating the hardware and with you sharing the build. Cheers Trackerman. |
#2
|
||||
|
||||
Re: 3D Printed CAT 963K Track Loader w/Raspberry Pi Control
No problem. I picked mine up from McMaster-Carr. "Grooved Clevis Pin w/Retaining Ring"
http://www.mcmaster.com/#clevis-pins/=14p669l
__________________
-Jeff To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#3
|
|||
|
|||
Re: 3D Printed CAT 963K Track Loader w/Raspberry Pi Control
RexRacer19,
Thank you for the link for the Clevis pins. Printing the track segments, what side did you have facing down on the print bed? Really interesting build, keep it up and thanks for sharing. Cheers Trackerman. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|