|
Big Boys of the road 4x4/6x6/8x8/10x10 Trucks This forum is for those multiple axle trucks and other vehicles on and off road. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
3D Printed 1/5 Scale 77 Ford F350
Started out as a smaller scale idea, but ended up being more of a test to see the limits to what size I could build something. This is the largest object I have 3d printed, and could obviously be larger depending on the time I had to put into the project.
I first came across the tires which are the largest scale rc tire available at 10" dia and these took me in this direction, so I started to design the rims to fit and went from there. Body and chassis designed and sliced for printing, over 120 seperate parts which took a few hundred hrs to print, and a while longer to assemble. It's still a work in progress..
__________________
Jason Last edited by JDH429; 03-15-2015 at 10:28 PM. |
#2
|
||||
|
||||
Re: 3D Printed 1/5 77 Ford f350
Mocking up the suspension. The axles are MOA type from rc4wd and the shocks are HPI Baja shocks. if you need a size reference, that's a 1 gal can propping up the rear end..
__________________
Jason |
#3
|
||||
|
||||
Re: 3D Printed 1/5 77 Ford f350
I had 2 printers running day and night it seemed for a few weeks, each printing multiple parts together at once.
The hood is removable to reveal a scale engine which is in the works, but as of right now this project is on a shelf, as I've burned myself out a bit and needed a change and have switched over to trying to finish up my Vario.
__________________
Jason Last edited by JDH429; 03-15-2015 at 10:38 PM. |
#4
|
||||
|
||||
Re: 3D Printed 1/5 Scale 77 Ford F350
That is awesome Jason! I wondered what had happened to you but I guess now I know!lol I was tempted to email you a couple of times just to see if you were alive. Great to see that you are building something so unique. I also really like the size of it!
Reg |
#5
|
||||
|
||||
Re: 3D Printed 1/5 Scale 77 Ford F350
Thanks Reg! Ya I was away for a bit. And this project is a bit off track for me and yes it soaked up a few months of free time. Looking forward to catching back up with what everyone else has been up to as well.
__________________
Jason |
#6
|
||||
|
||||
Re: 3D Printed 1/5 Scale 77 Ford F350
Like Reg said "That is awesome Jason!" fantastic job!!
Travis
__________________
AKA "00" Biddle RIP FreddyGearDrive 2-12-59/12-19-11 |
#7
|
||||
|
||||
Re: 3D Printed 1/5 Scale 77 Ford F350
This an amazing build, its looking great and glad to see your back at it!
|
#8
|
|||
|
|||
Re: 3D Printed 1/5 Scale 77 Ford F350
Great job Jason looks real good, there is some Cad time in that. Ed
|
#9
|
||||
|
||||
Re: 3D Printed 1/5 Scale 77 Ford F350
Truck looks OUTSTANDING!! The 3d printing is some of the best I have seen. Looks like it will not take too much filling and sanding to get a great looking body.
__________________
LYNN |
#10
|
||||
|
||||
Re: 3D Printed 1/5 Scale 77 Ford F350
Thanks for the compliments. Happy to share the pics. Wish I had a more complete model to show.
__________________
Jason |
#11
|
||||
|
||||
Re: 3D Printed 1/5 Scale 77 Ford F350
that last pic is so real looking if not for the monster can in the way
|
#12
|
||||
|
||||
Re: 3D Printed 1/5 Scale 77 Ford F350
wow ...wow..very nice work indeed
__________________
owner/operator.."got to operate to own" dwayne |
#13
|
|||
|
|||
Re: 3D Printed 1/5 Scale 77 Ford F350
Very nice work bud, any plans for an interior?
|
#14
|
||||
|
||||
Re: 3D Printed 1/5 Scale 77 Ford F350
Thanks again for the compliments everyone.
Thanks, no I hadn't given it much thought. This is one of those projects I may come back to in a few years when I rediscover interest in it. I hit a bit of a speed bump when assembling the 4 link suspension, the aluminum rod ends which I got from rc4wd ( the largest I could find) were very poorly made and sloppy enough where the whole truck shimmies back forth due the pressed ball inside the alum eye being too loose. Emailed rc4wd multiple times about it with no response, this took the wind out of my sails and I never progressed any further. Being that it sat idle for so long waiting for some help from them I moved into the next project. So here it sits, just an example of what can be created if you have the time.
__________________
Jason |
#15
|
||||
|
||||
Re: 3D Printed 1/5 Scale 77 Ford F350
__________________
Jason |
#16
|
||||
|
||||
Re: 3D Printed 1/5 Scale 77 Ford F350
Jason, very impressive build. I would love to see this one in action someday. Would a pan hard bar help with the side to side issue due to the loose ball joints? Keep up the great work. Hopefully you won't be off this one to long, would love to see it running.
|
#17
|
||||
|
||||
Re: 3D Printed 1/5 Scale 77 Ford F350
Hey Keith, I was thinking the same thing you are. That would solve the issue, I was just a bit pissed that these rod ends sucked so much and that rc4wd just ignored the emails I sent. If I get back at this one I will seriously think about something to take up the lateral movement like you suggested, good to hear from you.
__________________
Jason |
#18
|
||||
|
||||
Re: 3D Printed 1/5 Scale 77 Ford F350
I have been drooling on this build on the other forums and am glad to see that you're still on here as well. Looking forward to see what you print up next.
__________________
Jarrett |
#19
|
|||
|
|||
Re: 3D Printed 1/5 Scale 77 Ford F350
What 3d printer do you use and what modeling software,that looks amazing
|
#20
|
||||
|
||||
Re: 3D Printed 1/5 Scale 77 Ford F350
Wow, Jason, that looks awesome! keep up the good work
__________________
Giving up is not an option!!! Rob |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|