|
Highway Trucks and Trailers On road trucks and trailers single and twin axle trucks. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Mikes Mack
After seeing Lmackattack Mack's on this site I thought it would be a great second truck to build . So I acquired a king hauler plus bits and the Shapeways cab . I want /would like a single axle dump truck . I'm going to or say already locked the rear axle , now I'm figuring out the front end . I also want to thank Lmackattack for the help he has given me , you see my questions on his thread , and Bigford to start my own thread . So bear with me as I stumble through this project . Now for a picture of want I want . Take care Mike
|
#2
|
|||
|
|||
Re: Mikes Mack
And the pic didn't come through ,now want !?
|
#3
|
|||
|
|||
Re: Mikes Mack
Another attempt
|
#4
|
|||
|
|||
Re: Mikes Mack
If I touch the question mark it shows the pic how about with you guys ? Mike
|
#5
|
||||
|
||||
Re: Mikes Mack
Mike , PLEASE try a photo hosting site like photobucket
A U model on my to build list 1 of these years I use to drive 1 with a 25 ton Rogers detachable gooseneck .
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#6
|
||||
|
||||
Re: Mikes Mack
yea but too small for me old eyes
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#7
|
||||
|
||||
Re: Mikes Mack
The attached picture works. I agree, try photobucket Should be a very cool build though. Something different.
__________________
Jarrett |
#8
|
||||
|
||||
Re: Mikes Mack
way to go. look forward to watching a new mack build
|
#9
|
|||
|
|||
Re: Mikes Mack
How about this
|
#10
|
|||
|
|||
Re: Mikes Mack
How does one get a photo from photo bucket to this site without winging the ipad through the window ? Mike time lost to truck work to much time on the confuzer!
|
#11
|
||||
|
||||
Re: Mikes Mack
Would it werk the same as on iPhone if so , tap photo , tap i with circle around it at bottom left of menu bar that appears then 4 codes will come up , tap on IMG code . Come back to post hold finger in text area till paste comes up tap paste .
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#12
|
||||
|
||||
Re: Mikes Mack
Not a bad looking Mack.
This build should be fun (& challenging) for you. - RCT
__________________
WCMT Director - To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. "Keep the Shiny-side Up, the Dirty-side Down & Keep 'er to the Line." |
#13
|
|||
|
|||
Re: Mikes Mack
Another attempt
|
#14
|
|||
|
|||
Re: Mikes Mack
The last photo is thanks to IHBuilder . This is my truck so far it is a loose set up with a cardboard dump box . Today I'm of to get lo pro servos I hope then mount the rear axle . Mike
|
#15
|
||||
|
||||
Re: Mikes Mack
Mike in the [---] you want [img] in front [/img] at the end
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#16
|
||||
|
||||
Re: Mikes Mack
Looking good mike.
One thing I had to do was to cut the stock cab floor so the back of the Mack cab can rest on the frame . I glued the hood and cab together and hinged it at the front. This way the cab/hood tilts out of the way when changing a battery. With that short bed you will have to really think where the lift motor and esc will be located. My 6wheeler has the electronics really crammed in there. |
#17
|
||||
|
||||
Re: Mikes Mack
if he builds mack fuel tanks he could hide the esc in there
|
#18
|
||||
|
||||
Re: Mikes Mack
Quote:
A big thanks to Truckmaker. He's the one who showed me how to do it. Thanks Kent Mario Last edited by Supermario; 09-02-2014 at 04:15 PM. |
#19
|
|||
|
|||
Re: Mikes Mack
I had a few minutes tonite and mounted the rear springs and started to make axle mounts . Will attempt to post a pic when assembled . Mike
|
#20
|
|||
|
|||
Re: Mikes Mack
Company is gone can get back at my truck . Finally got my rear axle mounted . Tonite I installed the 2new low profile servos that's was interesting fun . Loosely mounted the engine and tranny and ran it that was a good feeling . Then I wasted a couple hours trying to post a couple photos that didn't work so I stared working on positioning the cab . Mike
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|