RCLogger - Page 4

RCLogger · #61 10-21-2010, 11:37 PM

Roller chain is # 35 with K1 on every second link. When I order the chain it comes in a minumin lenghts of 12 feet...

RCLogger · #62 10-21-2010, 11:43 PM

Neil the motor has three mounting holes on the front. Use a plate on those holes and then attach to the track frames.

I use Servocity mounts to attach to the sprocket.

Vanisle · #63 10-21-2010, 11:48 PM

Great use of local materials Greg. Do your track pads work well compared to Lou's - doesn't he have some molded plastic ones?

Richard

RCLogger · #64 10-21-2010, 11:56 PM

Yes Lou has the molded ones, we have had a pushing contest and my D8 has the upper hand. My pads cut into the dirt rather than float on the top. I would dig a deep hole very fast if I ran up agaist something the D8 could not push. Also the motor I use are 400 oz in per side on 18 volts 25 rpm. Nothing slows them down ! ! !
http://servocity.com/html/dayton_gear_motors__12v_.html

RCLogger · #65 10-22-2010, 12:02 AM

This was going to be a project down the road with the 400 oz in motors, it would be a tight fit with a pump and spools. I think if a person didn't make the blade 6way, but only up and down I think there would be enough room for the spools for the grapple, boom, and one for the blade..

steamer · #66 10-22-2010, 12:14 AM

Greg. Did you post a link for the roller chain and are the pads part of it. Rob

Iron Art · #67 10-22-2010, 12:20 AM

Greg, Was at NC Machinery day before yesterday and took 40 pictures of a 527 Cat skidder.Will share if you need some info. Fred

RCLogger · #68 10-22-2010, 12:38 AM

Quote:

Originally Posted by steamer

Greg. Did you post a link for the roller chain and are the pads part of it. Rob

Just go back a page on this thread (page 3) Rob and I posted the details on the pads.

greg

RCLogger · #69 10-22-2010, 12:42 AM

Quote:

Originally Posted by Iron Art

Greg, Was at NC Machinery day before yesterday and took 40 pictures of a 527 Cat skidder.Will share if you need some info. Fred

Sounds good Fred I think you should build it.

A person could also build it all electric I think. I once used servos on my KMC track skidder to operate the boom and grapple, I have to say it works GREAT. I took the centring system out of the servo so that it would turn endless, worked great for winch drums...

greg

steamer · #70 10-22-2010, 12:55 AM

Greg made a mess of that one. Didn't mean pad, should have said K-1 tab,
Rob

Vanisle · #71 10-22-2010, 01:33 AM

Quote:

Originally Posted by RCLogger

This was going to be a project down the road with the 400 oz in motors, it would be a tight fit with a pump and spools. I think if a person didn't make the blade 6way, but only up and down I think there would be enough room for the spools for the grapple, boom, and one for the blade..

Here's my idea on that. Use a 3 spool valve with a second valve to switch between the blade and the grapple functions. You shouldn't really need to use both at the same time. What do you think?

I just picked up a bunch of aluminum flatbar today to make the tracks for a 527. It's going to take a bunch of jigs to make them. Will I be able to? Dunno, but gonna try. Unfortunately, I have this little work thing that makes me the money to buy tools and materials to make things but prevents me from having the time to do it.

Richard

Oil Field Construction · #72 11-03-2010, 02:22 PM

Quote:

Originally Posted by RCLogger

This was going to be a project down the road with the 400 oz in motors, it would be a tight fit with a pump and spools. I think if a person didn't make the blade 6way, but only up and down I think there would be enough room for the spools for the grapple, boom, and one for the blade..

Would love to see you build this one!! Make two, I need one, lol...

RCLogger · #73 11-05-2010, 01:39 AM

Do you like this one Kevin !
http://www.machinerytrader.com/listi...x?OHID=7346425

Oil Field Construction · #74 11-05-2010, 01:44 AM

Quote:

Originally Posted by RCLogger

Do you like this one Kevin !
http://www.machinerytrader.com/listi...x?OHID=7346425

Greg I love it! Price is pretty good, but has a fair bit of hours on it...

RCLogger · #75 11-05-2010, 01:56 AM

In 1/14 scale ! Track frames 13.5 " , 9" wide, 12" high

Oil Field Construction · #76 11-05-2010, 01:58 AM

Yeah Yeah!! Beauty! Hurry get in your shop

Lots of work up here for that unit..

RCLogger · #77 11-05-2010, 02:05 AM

sent you a pm

aseejr · #78 11-14-2010, 08:28 PM

Greg - Thank you for taking the time to show us your toys today. Everyone was impressed. Can't wait to start on something. Hmmmm. where do we begin.

Albert Jr

RCLogger · #79 11-14-2010, 09:29 PM

Quote:

Originally Posted by aseejr

Greg - Thank you for taking the time to show us your toys today. Everyone was impressed. Can't wait to start on something. Hmmmm. where do we begin.

Albert Jr

Anytime Albert Lou and I enjoyed demonstrating our Iron.. There is quite a group of people you brought with you. I hope we were able to inspire you fellows into construction modeling.

greg

RCLogger · #80 11-21-2010, 09:20 PM

Attached is a project I started a few weeks ago, a long ways to go yet

Currently Active Users Viewing This Thread: 5 (0 members and 5 guests)