|
|
|||||||
| Truck Building Tech Covers mechanical and electrical components for truck modeling |
 |
|
|
Thread Tools | Display Modes |
|
#1
02-12-2012, 01:38 PM
|
|||
|
|||
Tamiya Semi Leaf Spring
Can anyone tell me the length of the leaf springs on a King Hauler.
I am building an 8x8 project truck and the distance between the axles will not allow me to use the springs I have. These are the Wedico brand. They are too short for what I want to do. this is basically a scratch build with as many parts home made that my tools will allow me to make. I would also like to know if the Tamiya springs are closed eye on both ends. 
|
|
#2
02-12-2012, 04:23 PM
|
||||
|
||||
|
Re: Tamiya Semi Leaf Spring
Center of hole to center of hole 4 1/16", Length-end to end 4 5/16", width 1/4". And yes they are closed eye on both ends. Good luck and post some pics!!
__________________
ECMT Members: Join your Group. Go to your username in the top right corner of the page and click on it. When your profile opens go down to group memberships, Click on East Coast Mini Truckers, The social group will open and scroll down And in the middle it you will see "Join Group" Click on it and then confirm that you REALLY wanna join. [SIZE="2"]
|
|
#4
02-12-2012, 05:17 PM
|
|||
|
|||
|
Re: Tamiya Semi Leaf Spring
They will work great. It must have been the difference between 1:14.5 and 1:16th scale
The springs I have now are almost exactly 1 inch shorter and that is how much I need. Now to just be able to find the springs and mounting hardware. .
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
