New Year--New project

[jerry56]

It doesn't quit.... it would just come on when you cycled the blade up and down. It didn't shut off or cycle thru it's various modes.... it would just come on... When I swapped out the servo with a Hitec it was fine.... I would have just used the Hitec but the horn is to short so I'm hoping the SPT servos themselves aren't the problem I guess they could be drawing enough juice to cause it but the Hitecs don't....if they are I'll just leave the beacon on or unhook it....or go the BEC route.... or connect the battery straight to the receiver... we'll see...