|
Electronics tech Anything to do with the electronics in a model. Lights, Radio, ESC, Servo, Basic electrical. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Dx8i Carson tipper control
Hi I have a tamiya man tgx and a Carson frigel tipper. How can I operate the tipper body via tx without wiring to rx in tractor unit. Is it possible to bind two rx or do I need to create a different model within the menu. I want to be able to hitch and unhitch trailer without touching the model. Many thanks
|
#2
|
||||
|
||||
Re: Dx8i Carson tipper control
try to bind 2 receivers at the same time maybe ?
|
#3
|
||||
|
||||
Re: Dx8i Carson tipper control
What radio do you have????
|
#4
|
||||
|
||||
Re: Dx8i Carson tipper control
Yes you can bind two receivers at the same time for the same model copy. But the channels will be the same on both receivers, meaning if you're using throttle, rudder, aileron, eleveron for the truck, you can't use the same channels for the trailer too.
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#5
|
||||
|
||||
Re: Dx8i Carson tipper control
The title being Dx8i I would assume is Spektrum.
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#6
|
|||
|
|||
Re: Dx8i Carson tipper control
Sorry for the delay, the radio I a DX8 spektrum. Thanks for the help.
|
#7
|
||||
|
||||
Re: Dx8i Carson tipper control
Im still not quite sure what your asking. How many channels are you needing? You can bind 2 receivers to different models on the transmitter and change back and forth.
If your asking how to program the transmitter to make the usable channels do what you want and assign to what switches you want? Then I may be able to help. I just went through this process to get my dx9 to do what I wanted it to. Its probably going to be a similar process for the dx8. First step is to update the transmitter with the latest firmware. I had to do this in order to access the multi rotor model type. If you already have this type on your transmitter then you shouldnt need to update the firmware. Simply selecting multi rotor model type will allow you to assign any channel to any stick/knob/switch, or whatever. Hope this is a help. |
#8
|
||||
|
||||
Re: Dx8i Carson tipper control
Ok I re-read first post. I think I know what your asking now, sorry Im tired.
Binding a second reciever would be a way. Something like this could be another possiblity. http://www.rccrawler.com/forum/vendo...d-channel.html |
#9
|
||||
|
||||
Re: Dx8i Carson tipper control
I would say binding another reciever to a different model memory on the radio would be the easiest way to operate the trailer as I was thinking something similar if I put a wrecker body on my day cab as I have a dx6i and 5 channels are already gone and I would need a few more to operate the wrecker body, and switching between the models is just a matter of pressing a few buttons .............
Cheers Tracy
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 Love my Kenworths To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|