RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Ag and Industrial Equipment and Buildings > Construction Equipment

Construction Equipment If it digs, pushes, hauls dirt "off road" post it here.


Reply
 
Thread Tools Display Modes
  #301  
Old 02-09-2013, 01:38 PM
D8R D8R is offline
Apprentice
 
Join Date: Sep 2010
Location: Ronninge, south of Stockholm, Sweden
Posts: 425
D8R is on a distinguished road
Default Re: D8R +463 in 1/5,6

How to turn a bowl shaped part?
Well, do not have any radie-turning tool for lathe, so had to do as good as possible with normal bits and then making the last steps with a file. Doesn't feels good working with file when lathe is running.
Have seen some solutions on net, anyone having suggestion, all input appriciated, need that if making some wheels for next model.

Aircleaner top bowl


Anti skid plate mounted outside cab,


and got some nice cable for GPS, here just testing how it looks. Cables are those that stores selling phones use for safety (prevent stealing the phone). There's different sizes of cables, this one was the smallest one and has right diameter of the spool. Connection in both ends will be remade.
When building models, you should always keep eyes open, useable parts are everywhere!


Dan
Reply With Quote
  #302  
Old 02-09-2013, 05:38 PM
9W Monighan's Avatar
9W Monighan 9W Monighan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Pittsburgh,PA.
Posts: 1,285
9W Monighan will become famous soon enough9W Monighan will become famous soon enough
Default Re: D8R +463 in 1/5,6

Nice job on the pre cleaner Dan. If you had a lot of those to make you could make a wooden pattern and spin thin aluminum over it.
Reply With Quote
  #303  
Old 02-10-2013, 03:35 PM
td9clyde td9clyde is offline
Dozer Builder
 
Join Date: Aug 2010
Location: Keystone, IN
Posts: 728
td9clyde will become famous soon enoughtd9clyde will become famous soon enough
Default Re: D8R +463 in 1/5,6

nice work I can't wait to see this move and hear it run
__________________
I built this thing and have it working now what do I do with it?
Reply With Quote
  #304  
Old 02-16-2013, 01:08 PM
D8R D8R is offline
Apprentice
 
Join Date: Sep 2010
Location: Ronninge, south of Stockholm, Sweden
Posts: 425
D8R is on a distinguished road
Default Re: D8R +463 in 1/5,6

Thanks guys, me to waiting to hear it.
But found out that aircleaner was missing something, here the real one


and model


A little hard to see, mesh should should be finer, but this done for durability. Have learned from shows so far that visitors can't read (signs say DO NOT TOUCH) leaning, peeling, and looking with the their fingers
Here a close up pic, don't know the reason for why some holes missing but that's the way its looks.


Dan
Reply With Quote
  #305  
Old 02-16-2013, 01:41 PM
Stefan Stefan is offline
Green Horn
 
Join Date: Dec 2011
Location: Near Munich, Germany
Posts: 157
Stefan is on a distinguished road
Default Re: D8R +463 in 1/5,6

Nice detailing again, Dan! Really incredible. Don´t want to push you*, but I see the original air cleaner has some kind of flange at the bottom

Stefan

*) (yes, I do)
Reply With Quote
  #306  
Old 02-16-2013, 07:07 PM
doodlebug's Avatar
doodlebug doodlebug is offline
Big Dawg On The Bone
 
Join Date: Dec 2010
Location: South 40 Swamp, Utah
Posts: 2,398
doodlebug is on a distinguished road
Default Re: D8R +463 in 1/5,6

Ever thought about putting up an electric fence around it?
Lol! Shock the ???? Out of them!
Like the progress!
Cheers, Neil.
Reply With Quote
  #307  
Old 02-17-2013, 04:01 AM
D8R D8R is offline
Apprentice
 
Join Date: Sep 2010
Location: Ronninge, south of Stockholm, Sweden
Posts: 425
D8R is on a distinguished road
Default Re: D8R +463 in 1/5,6

Quote:
Originally Posted by Stefan View Post
Nice detailing again, Dan! Really incredible. Don´t want to push you*, but I see the original air cleaner has some kind of flange at the bottom

Stefan

*) (yes, I do)

Happy now Stefan? I could see that coming


No laser shop open this morning so did it old fasion style with drilling, file and so on

Quote:
Ever thought about putting up an electric fence around it?
Lol! Shock the ???? Out of them!
Like the progress!
Cheers, Neil.
Well Neil, sometimes you wounder about how people think (or maybee do not), have had parents being angry when I tell the kids to not touching/mowing things like the doors. Just waiting for that day when they steal the driver or his dog inside cab. BUT most visitors are realy nice, interested in the build and eager to see all details and how things was designed
Dan
Reply With Quote
  #308  
Old 02-17-2013, 05:26 AM
Stefan Stefan is offline
Green Horn
 
Join Date: Dec 2011
Location: Near Munich, Germany
Posts: 157
Stefan is on a distinguished road
Default Re: D8R +463 in 1/5,6

Ha, very quick reaction, Dan . I´d say that´s 1:0 for you.
Reply With Quote
  #309  
Old 02-24-2013, 01:43 PM
dirtpusher9's Avatar
dirtpusher9 dirtpusher9 is offline
Moderator
 
Join Date: Aug 2010
Location: Texas
Posts: 457
dirtpusher9 has a spectacular aura aboutdirtpusher9 has a spectacular aura about
Default Re: D8R +463 in 1/5,6

Looking better all the time Dan. But you are killing me having to wait and see this master piece run.
__________________
Joe
Reply With Quote
  #310  
Old 02-25-2013, 02:47 AM
D8R D8R is offline
Apprentice
 
Join Date: Sep 2010
Location: Ronninge, south of Stockholm, Sweden
Posts: 425
D8R is on a distinguished road
Default Re: D8R +463 in 1/5,6

Quote:
Originally Posted by dirtpusher9 View Post
Looking better all the time Dan. But you are killing me having to wait and see this master piece run.
Thanks, yes I know it's taking so long time but who's waiting......
Will try starting/breaking in the Honda engine next weekend , I hope.
But the goal is to have it up and running this summer
Dan
Reply With Quote
  #311  
Old 03-10-2013, 09:35 AM
D8R D8R is offline
Apprentice
 
Join Date: Sep 2010
Location: Ronninge, south of Stockholm, Sweden
Posts: 425
D8R is on a distinguished road
Default Re: D8R +463 in 1/5,6

Did not get it started will not say anything now until I have done the start.
This weeks evenings (have max 2 hours of time/day) redid the connections between machine and pusharms.
(old photo some years ago when planning how cab should be done)


Was never happy with the simple solution, did mill new ones from a bar. Amazing how much time it took, did use an old steelplate (have not yet made that cheeseplate Reg used) to mill some parts at rotary table.


Didn't separate the 2 parts until almost finished, have a swivel bearing inside


Had to modify the bolts to fit inside swivel and getting as much movent as possible


The new connectors welded to pusharms, looks now like proto


Dan
Reply With Quote
  #312  
Old 03-10-2013, 03:40 PM
Kingcam2's Avatar
Kingcam2 Kingcam2 is offline
Green Horn
 
Join Date: Mar 2013
Location: Mount Evelyn/Lilydale Area, Melbourne, Victoria, Australia, 3796
Posts: 178
Kingcam2 is on a distinguished road
Default Re: D8R +463 in 1/5,6

Hi Dan

OMG what a Big Build you have worked on for over the Past ten years.

Love you work, can't wait to see I Video of it running.

From Cameron.
__________________
Sees no evil, Hears no evil, Speaks no evil
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #313  
Old 03-10-2013, 07:30 PM
doodlebug's Avatar
doodlebug doodlebug is offline
Big Dawg On The Bone
 
Join Date: Dec 2010
Location: South 40 Swamp, Utah
Posts: 2,398
doodlebug is on a distinguished road
Default Re: D8R +463 in 1/5,6

Hey Dan, read thru Jeff's forum, http://www.hydraulicinnovations.com/...read.php?t=449 and get some idea's for your future transport truck & trailer. I can give you idea's for hydrostatic drive. pm me with questions.
More progress on the "Kitty"
Cheer's, Neil.
Reply With Quote
  #314  
Old 03-17-2013, 12:12 PM
D8R D8R is offline
Apprentice
 
Join Date: Sep 2010
Location: Ronninge, south of Stockholm, Sweden
Posts: 425
D8R is on a distinguished road
Default Re: D8R +463 in 1/5,6

Quote:
Hey Dan, read thru Jeff's forum, http://www.hydraulicinnovations.com/...read.php?t=449 and get some idea's for your future transport truck & trailer. I can give you idea's for hydrostatic drive. pm me with questions.
More progress on the "Kitty"
Cheer's, Neil.
Neil, thanks for the link! Have not decided what type pf power there will be in the truck, would like to have a small gas engine , like Honda GX25 or GX33 with a real gear box. Have looked at Eatons hydro parts, we'll see.
Havn't figured out how to move dozer without starting engine. Today I have to remove gears in hub reduction but that will not be practical to do every time machine is moved. Don't know how much force needed to get hydraulic motors turning.

This weekends update:
Steps om push arms was missing, did weld a 6mm steel rod on and increased height with some welds, grinding down to get the anti slip pattern.


The rear part of engine comparment was finaly done
Connection to ripper is with quick couplings (will use same outlet for scraper), was not satisfied with the small blocks, did make new longer with a recess to take strain from bolt when cylinder moves. Of course, first one was made with connection wrong


Planning for some painting next weekend on new or remade parts. Still windows to cut, make the connections at cylinders, but no more new parts on "to do" list. Goal is to have model running 3 rd weekend of june at a show north of Stockholm. If everything goes as planned it can be done but still not convinced that all hydraulic will work flawless from beginning.
/Dan
Reply With Quote
  #315  
Old 03-17-2013, 01:30 PM
tracksntreadslou's Avatar
tracksntreadslou tracksntreadslou is offline
Journeyman
 
Join Date: Aug 2010
Location: Vancouver Island BC
Posts: 583
tracksntreadslou is on a distinguished road
Default Re: D8R +463 in 1/5,6

Dan awsome work...Cant wait to hear this cat run and see it in action..You must get alot of compliments on it at the shows ..dont know if you have seen there are a few larger rc dozers workig on youtube
https://www.youtube.com/watch?v=dCKJQ5S1hcw
Hey Dan seeing you are doing the windows soon thought this may intrest you ..I am going to order some for future projects http://www.greathobbies.com/productinfo/?prod_id=FOR133
Reply With Quote
  #316  
Old 03-17-2013, 07:38 PM
doodlebug's Avatar
doodlebug doodlebug is offline
Big Dawg On The Bone
 
Join Date: Dec 2010
Location: South 40 Swamp, Utah
Posts: 2,398
doodlebug is on a distinguished road
Default Re: D8R +463 in 1/5,6

Hey Dan, do you have room to tee in a couple of high pressure ball valves
On the drive motor's? That would give freewheel to the beast!
Cheer's, Neil.
Reply With Quote
  #317  
Old 03-17-2013, 11:56 PM
apfubar apfubar is offline
Green Horn
 
Join Date: Apr 2011
Posts: 295
apfubar is on a distinguished road
Default Re: D8R +463 in 1/5,6

Dan,

Have you tried just opening the valves up that are there now? You could do some smarts with the servos... Its gotta be easy to run the receiver and servos without the motor?

Cheers,
AP
Reply With Quote
  #318  
Old 03-18-2013, 02:50 AM
D8R D8R is offline
Apprentice
 
Join Date: Sep 2010
Location: Ronninge, south of Stockholm, Sweden
Posts: 425
D8R is on a distinguished road
Default Re: D8R +463 in 1/5,6

Quote:
Dan,
Have you tried just opening the valves up that are there now? You could do some smarts with the servos... Its gotta be easy to run the receiver and servos without the motor?
Cheers,
AP
Quote:
Hey Dan, do you have room to tee in a couple of high pressure ball valves
On the drive motor's? That would give freewheel to the beast!
Cheer's, Neil.
Thanks guys for the suggestions. Have not filled up system yet, don't want to stress hyd motors before they have oil. Today it's almost impossible to move the machine if not gears are removed.
Neil, there's not room for anything more inside, it's cramped!
Will test these when filled up, until then go without gears.

Yes Lou, have tried to follow what's shown on tube. I know of one BIG norwegian D11 (1:4 750kg=1600lbs) that has not been seen there yet, guess that will come when snow/winter is over.
FOUND IT:
http://www.youtube.com/watch?v=-MxKX_bhwRI

/Dan
Reply With Quote
  #319  
Old 03-19-2013, 12:32 PM
pugs pugs is offline
Wannabe
 
Join Date: Sep 2010
Location: Central Wisconsin
Posts: 368
pugs is on a distinguished road
Default Re: D8R +463 in 1/5,6

Looking really good Dan. As far as moving it, not much different than todays skid steers and track loaders. If engine dies, it sits where it is till fixed, no moving it without something to pick it up. Don't ask how I know (new perkins engines aren't cheap lol ) Old ones had a manual bypass valve you could turn out to beable to tow them, new ones with hydraulic released parking brakes can't do it.

Does the guy with the 1:4 D11 have a build thread anywhere?
__________________
Jeff

Last edited by pugs; 03-19-2013 at 12:35 PM.
Reply With Quote
  #320  
Old 03-19-2013, 12:54 PM
modelman modelman is offline
Craftsman
 
Join Date: Aug 2010
Location: Cullman Al.
Posts: 856
modelman is on a distinguished road
Default Re: D8R +463 in 1/5,6

D8R-the dozer is looking great! If you want to see how a good operator works, check out D9Joes videos. He is by far the best operator I have seen. Looks just like a real machine working. He is the class of the field in my opinion.
Reply With Quote
Reply

Tags
1/5.6, big scale, cat, d8r, dozer


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:26 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.