Train horns???

[Chi-Noos]

i know it's probably a complete shot in the dark but I'm looking for a place to find a decent set of horns in a scale close to the tamiya semis that are 1:14 if you guys can help I'd great appreciate it, thanks in advance.

[up9018]

Probably the closest you will come to what you want.

http://www.ozarkminiatures.com/scripts/prodView.asp?idproduct=24113

Chris

[Mikem]

Hi Chris these horns are tiny for truck scale they are 1/20 or so . I've been looking for my 1/13.7 scale trains and end up making them myself . Mike

[Dreamweaver]

You would want G scale

http://www.ebay.com/itm/LGB-21490-AMTRAK-GENESIS-PHASE-4-DIESEL-LOCO-GRAY-5-PIECE-AIR-HORN-PART-NEW-/281584186090?_trksid=p2054897.l4275

[Chi-Noos]

G scale comes out to 1:22.5 is there anything closer to 1:14 even if it ends up being a little big?

[Bo Wallen]

Those guys might be able to guide you. http://www.freerails.com/view_forum.php?id=50

They deal with big scale train 1/13.7 and 7/8th Just an idea.

[Chi-Noos]

Those guys might be able to guide you. http://www.freerails.com/view_forum.php?id=50

They deal with big scale train 1/13.7 and 7/8th Just an idea.

Thanks for the link Bo Wallen unfortunately I can't ask the question being as I'm not a member of the forum and they're not accepting new members.

[Bo Wallen]

Ooh!!! tat's sad :-( You might lurk around and find one other link or send Herb Kephart admin in the forum a mail. can't hurt to ask. email address is on the site. or i can pm you that one. Hope it works
Bo

[Mikem]

You could also try some 3/4 inch scale rail sites . Mike

[Chi-Noos]

Ooh!!! tat's sad :-( You might lurk around and find one other link or send Herb Kephart admin in the forum a mail. can't hurt to ask. email address is on the site. or i can pm you that one. Hope it works
Bo

Bo feel free to message me, Boardman@lakeborn.net thanks

You could also try some 3/4 inch scale rail sites . Mike

Mike I have no.clue where I'd look for that at care to post links? Thanks

[steamer]

Try these folks. They're for ship models and the second one down comes in three different lengths.
Rob

http://www.harbormodels.com/site08/horns.html

[Dreamweaver]

When you are dealing with Inter-Species parts like this don't worry about what the scale of the part is.

I have parts that are for 1/8 cars that are right on scale for these trucks.

I'd look for either a G scale horn or an S scale horn. Get one on you might be surprised.

Like I said I have parts from 1/8 scale cars like windshield wipers and door handles that fit these trucks perfectly. A 1:1 car is much smaller than a 1:1 truck therefore its parts are smaller. If you use a larger scale part then the scale comes out right. Trains are much bigger than trucks, same thing works in reverse.

[Chi-Noos]

When you are dealing with Inter-Species parts like this don't worry about what the scale of the part is.

I have parts that are for 1/8 cars that are right on scale for these trucks.

I'd look for either a G scale horn or an S scale horn. Get one on you might be surprised.

Like I said I have parts from 1/8 scale cars like windshield wipers and door handles that fit these trucks perfectly. A 1:1 car is much smaller than a 1:1 truck therefore its parts are smaller. If you use a larger scale part then the scale comes out right. Trains are much bigger than trucks, same thing works in reverse.

Thanks a lot dreamweaver

[Mikem]

There are some for sale on Shapeways but I can’t remember the name

[jerry56]

This is a 7 year old thread.... just sayn