View Full Version : Peterbilt 367 day cab
Grainfarmer
07-09-2015, 03:56 PM
Hi together!
Here are the firdt pics of my Graindumper. Axles made by WEDIXO, chassis homemade...
http://www.bilder-hochladen.net/files/big/cc0h-ov-5e3d.jpg
http://www.bilder-hochladen.net/files/big/cc0h-ow-5e86.jpg
regards
Frank
FabOne
07-09-2015, 09:05 PM
GREAT looking truck!
-Terry
Grainfarmer
07-10-2015, 02:37 AM
Merci ;)
Grainfarmer
07-12-2015, 02:16 PM
Some progress:
The Cummins-Diesel is fixed:
http://www.bilder-hochladen.net/files/big/cc0h-p1-77ea.jpg
The frame for the dump bed ist made if brass and connected to the chassis:
http://www.bilder-hochladen.net/files/big/cc0h-p2-cc68.jpg
I found some aluminum rims for the front axle. This is the picture if the Pete with teh dump bed:
http://www.bilder-hochladen.net/files/big/cc0h-p3-1180.jpg
regards
Frank
doodlebug
07-12-2015, 03:03 PM
Looking great Frank!
Cheers, Neil.
Grainfarmer
07-19-2015, 04:12 AM
Hi together!
In the third axla I want to lock the diff...here is a picture of the housing and the bevel gears of the WEDICO axle:
http://www.bilder-hochladen.net/files/big/cc0h-p4-3b43.jpg
arf1201
07-19-2015, 09:55 AM
I keep thinking of doing this with my sons truck
126happy
07-19-2015, 02:12 PM
great work frank!! looks like its coming along pretty good!!
Grainfarmer
07-26-2015, 02:01 PM
Nothing exciting...:
To lock the diff of the third axle I bored a thread next to the bevel gear. A setscrew fixes the driveshaft.
http://www.bilder-hochladen.net/files/big/cc0h-p5-f85e.jpg
At the moment I am struggeling a bit with the bearing of the dump box...so I made the first mudflap-test:
http://www.bilder-hochladen.net/files/big/cc0h-p6-c5a0.jpg
regards
Frank
Grainfarmer
08-08-2015, 03:34 AM
By gluing an aluminum sheet on the bottom, I enforced the dump bed:
http://www.bilder-hochladen.net/files/big/cc0h-p8-3fff.jpg
The geared motor will drive the spindle...:
http://www.bilder-hochladen.net/files/big/cc0h-p9-70d9.jpg
Grainfarmer
08-13-2015, 03:12 PM
The steps on the right side are fixed to the cab:
http://www.bilder-hochladen.net/files/big/cc0h-ph-4c34.jpg
The spindle is connected to the geared motor...:
http://www.bilder-hochladen.net/files/big/cc0h-pi-9106.jpg
The rod next to the motor drives the locking shaft. Two levers will open the tailgate when the dump bed is lifting...:
http://www.bilder-hochladen.net/files/big/cc0h-pj-18ec.jpg
regards
Frank
Grainfarmer
08-22-2015, 11:58 AM
Some new parts are fixed under the cab...
http://www.bilder-hochladen.net/files/big/cc0h-pk-687a.jpg
http://www.bilder-hochladen.net/files/big/cc0h-pl-1f33.jpg
Grainfarmer
09-26-2015, 06:41 AM
Last week the bumper arrived:
http://www.bilder-hochladen.net/files/big/cc0h-pp-d205.jpg
http://www.bilder-hochladen.net/files/big/cc0h-pq-e863.jpg
Made by http://www.ds-modellbau.de/DS-Modellbau/Willkommen.html
...got to get it chrome-plated...:p
Grainfarmer
12-01-2015, 03:56 PM
The locking for the tailgate is done...:
http://www.bilder-hochladen.net/files/big/cc0h-qc-288b.jpg
The spacer ring connects both hubs to the shaft:
http://www.bilder-hochladen.net/files/big/cc0h-qd-b5a3.jpg
Grainfarmer
04-08-2016, 09:43 AM
Hello together!
Today I got the bumper back: chrome plated...
http://www.bilder-hochladen.net/files/big/cc0h-qj-9ab6.jpg
vBulletin® v3.8.6, Copyright ©2000-2024, Jelsoft Enterprises Ltd.