First Truck Build [Archive] - RC Truck and Construction

Kausekaos

10-05-2015, 12:59 AM

Started building my first truck today. Grand Hualer on King Rails to fit one of Reg's boxes that came with the Mack R Dump I bought off Keith which I sold already lol. Got ahead of myself just wanted it to look like something until I finished while it sat. Still haven't build the trans. Was messing with the fenders just to see how they would look under the dump box. Going to drill hole in rails to mount them later this week. Still not sure if they will actually make the final cut.

Problem I see already is the stacks wont clear the part of the dump that covers the cab.

Couple pics
http://i45.photobucket.com/albums/f89/Kausekaos/20151005_005607.jpg (http://s45.photobucket.com/user/Kausekaos/media/20151005_005607.jpg.html)
http://i45.photobucket.com/albums/f89/Kausekaos/20151005_005522_1.jpg (http://s45.photobucket.com/user/Kausekaos/media/20151005_005522_1.jpg.html)

Already have a 2nd Grand coming tomorrow for another build I have planned, and it will stay on the longer rails. They are addictive. And I said only one lol

RCP57

10-05-2015, 01:42 AM

Lookin good!

speedy8305

10-05-2015, 09:55 AM

that was a sweet mack you bought

Kausekaos

10-05-2015, 06:00 PM

that was a sweet mack you bought

Another member on here picked it up so it might surface again completed.

126happy

10-05-2015, 07:37 PM

great start to your 1st build. cant wait to see it when your done.

Kausekaos

10-05-2015, 07:44 PM

Might change the plan again lol. Not sure. Thought about making this a daycab and getting in line for a dump trailer from Reg.

Kausekaos

10-06-2015, 10:24 PM

Decided to swap it back to the Grand Rails. Going to install a erc lift axle and wait for a new box from a certain someone. On vacation in a few weeks so I'll try my hands at closing off the back of the cab. I didn't know with the shapeways pete long nose hood and fenders you have to relocate the front axle. How hard is that? I was considering getting them.

http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20151006_214930.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20151006_214930.jpg.html)

Here it is on the King rails
http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20151006_033154.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20151006_033154.jpg.html)
http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20151006_033216_1.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20151006_033216_1.jpg.html)

Roundabout

10-07-2015, 03:05 AM

nice looking truck. it's no problem to relocate the axle, you just move it forward on the suspension.

Kausekaos

10-07-2015, 05:51 AM

nice looking truck. it's no problem to relocate the axle, you just move it forward on the suspension.

Do you have a picture for reference? I was looking at it but couldn't figure out how to move it.

Also as far a esc what should I use. I want lights and sound so didn't know if I should get a MFU or not.

Roundabout

10-07-2015, 08:22 AM

go for the servonaut lights and sound it dosnt take up much room in your truck. or the beier sound module, ill post pics of my front axle set on a minute

Roundabout

10-07-2015, 08:33 AM

You just Mount the axle In front of the pin on the suspension. First to pics are my largecar build, and the last three is my hay truck.
I'm uding the Pete hood from shapeway on the hay truck and verkerk lowprifile tyres.

http://i187.photobucket.com/albums/x287/harborcitysocialclub/D08712AC-A070-43BF-BEA6-F0EE59B94B8A_zpssadbhn7y.jpg (http://s187.photobucket.com/user/harborcitysocialclub/media/D08712AC-A070-43BF-BEA6-F0EE59B94B8A_zpssadbhn7y.jpg.html)

http://i187.photobucket.com/albums/x287/harborcitysocialclub/DB219457-5B51-465A-BCF1-D0C69734A82B_zpsqmbcfcvd.jpg (http://s187.photobucket.com/user/harborcitysocialclub/media/DB219457-5B51-465A-BCF1-D0C69734A82B_zpsqmbcfcvd.jpg.html)

http://i187.photobucket.com/albums/x287/harborcitysocialclub/663B2141-B5AA-4244-8976-DF0C599A400A_zpsuy9njpjb.jpg (http://s187.photobucket.com/user/harborcitysocialclub/media/663B2141-B5AA-4244-8976-DF0C599A400A_zpsuy9njpjb.jpg.html)

http://i187.photobucket.com/albums/x287/harborcitysocialclub/A58A0BA3-F761-4DAC-A98A-6F8809F8A7F4_zps2m3r8o4y.jpg (http://s187.photobucket.com/user/harborcitysocialclub/media/A58A0BA3-F761-4DAC-A98A-6F8809F8A7F4_zps2m3r8o4y.jpg.html)

http://i187.photobucket.com/albums/x287/harborcitysocialclub/68594088-1F54-44B7-B647-81CC04A83846_zpsgjvshnyx.jpg (http://s187.photobucket.com/user/harborcitysocialclub/media/68594088-1F54-44B7-B647-81CC04A83846_zpsgjvshnyx.jpg.html)

http://i187.photobucket.com/albums/x287/harborcitysocialclub/8D2D11EC-CFC0-470D-B7CD-3DDE226713FD_zps43igtydp.jpg (http://s187.photobucket.com/user/harborcitysocialclub/media/8D2D11EC-CFC0-470D-B7CD-3DDE226713FD_zps43igtydp.jpg.html)

http://i187.photobucket.com/albums/x287/harborcitysocialclub/10636173_10153159871459841_8093726366318253356_n_z ps2tnwpct3.jpg (http://s187.photobucket.com/user/harborcitysocialclub/media/10636173_10153159871459841_8093726366318253356_n_z ps2tnwpct3.jpg.html)

Kausekaos

10-07-2015, 08:21 PM

I'll look into the servonaut lights and sound. The axle relocation doesn't look hard at all. I think I will try that and get the shapeways Pete Hood.

Right now I'm trying to close off the back of the Cab. I took the sleeper cover and cut it. I like the little rivets. I used the piece that I cut out of the middle to be the back support and put them in place and used tire glue to put them together. I used a blade to trim the things I didn't want. Now I need to fill all the holes and gaps. What putty stuff do you guys use. Found this nice little piece of plastic that is thick enough to be used for the rear window. If this doesn't work I'll use the top of the sleeper.

Here's some pics. My cut wasn't all that clean. Its a learning process, this is my first go around no laughs.

http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20151007_174337.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20151007_174337.jpg.html)
http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20151007_195846.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20151007_195846.jpg.html)
http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20151007_195856.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20151007_195856.jpg.html)
http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20151007_195922.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20151007_195922.jpg.html)
http://i45.photobucket.com/albums/f89/Kausekaos/20151007_160552.jpg (http://s45.photobucket.com/user/Kausekaos/media/20151007_160552.jpg.html)

Kausekaos

10-11-2015, 02:25 PM

Body work stalled for now. Need tamiya white putty. Also ordered another sleeper back. Going to try to make two. One with a window and one w/o and see which comes out better. Also I need to order the hood and fenders. Already ordered the lights from garden and some other stuff. Still dont know which grill or front bumper to get yet. Dont know if I want to use the plastic Tamiya stuff since I also want to attempt a tilt hood for easy access.

Need advice as far as esc i was thinking a regular Tamiya one. I want sound like i stated before and turn signals too but dont know if I should just buy the Tamiya Unit. With that I dont need a esc right?

I was looking at the servanut and bieber sound units. With that I can use the esc but what do I use for light controls. I know there was a guy on rccrawler that made a light controller. Was thinking maybe that was the way to go. Also found a video on YouTube where I think someone on here used this. Just no reverse sound so I would have the same problem that Reg is having.
http://www.rcbrmin.com/114-rc-truck-sound-unit-effect-v8-v6-l6-p-535.html

Also the current remote have is a 4 channel so I want to updgrade to a remote with more channels and different model memory. Must have enough channels for a Track loader. Going to be ordering one hopefully by the end of the month.

Any advice or recommendations? Sorry if my questions seem stupid never messed with sound and turn signals. Lights yeah but simple on and off, never working lights.

Kausekaos

10-15-2015, 09:23 PM

Besides this is there anything else I need to get to fill the gaps etc etc.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001503364&I=LXRXX2&P=K

tamiya fan

10-16-2015, 11:28 PM

The Tamiya putty is good for fine filler(like scratches, etc...) but you need bondo to fill the gap of the cut. I used "Evercoat" #100416 metal coat. (Ebay) A lot of people on the forum recommend this. I did the same thing with the back cover. For gluing the pieces and backers together use Tamiya glue (orange) or Plastistrut glue, works pretty well and welds the pieces together. Also fill in the gap as much as possible with bits of plastic possibly styrene and glue before bondo fill, gives a stronger joint and less possible crackage. There are right ups on this if you run a search on forum.
Hope this helps.

tamiya fan

10-17-2015, 03:34 AM

Hi again Kausekaos,
Just another thought, for the rear glass. The sheet you have in the picture looks thick? (hard to tell) Plastistrut also makes clear plastic thin sheet (styrene) that is easy to work with. Available at Tower also.

Kausekaos

10-17-2015, 06:05 PM

Ok cool. About to place a order with tower. Thanks.

Whats a good thickness to get for the Styrene to make and replace body panels?

tamiya fan

10-17-2015, 07:50 PM

About the same size as the body panels. I just measured the stuff I used (comes in sheets) and it is 1/16", but I think they measure it different? I would go thinner for clear window material. Just kind of study what's available. If your getting a new rear panel that's good, but the gap you have could be filled with styrene and the glue then bondo. I did mine the same way you did, had some larger gaps, and it worked for me. But trying to get it better with a new piece doesn't hurt either. Cut it out a little bigger so you can straight edge sand it straight after cutting. (just a little bigger, helps with gaps)

It's always a learning experience. Doing the back panel like you are works pretty well. (you have to put 2 notches in the bottom deck for panel to fit in) Hope this helps you out. Good luck!

Kausekaos

10-17-2015, 08:42 PM

Yeah the new panel came yesterday but i also have a Aeromax coming Monday that I'm turning into a day cab. The Styrene comes in .030, .040, .060, .080 and .125. I don't know which one to get. The clear I've only seen in .010.

tamiya fan

10-18-2015, 02:47 AM

Here is what I looked up. Really close to these sizes. Only 1/8 = the exact decimal. A 1/16 = .0625, but close enough.

.030=1/32
.040=3/64
.060=1/16
.125=1/8

The .010 is thin but easier to cut and will work fine.(Exacto knife on this) Just don't paint the clear, for some reason (Tamiya spray paint any way) will have a reaction on the plastic and put a curve in it. I think you are doing fenders too, might be easier to go with thinner sheet so it will bend easier. I haven't done fenders before, so not sure. 1/16 inch is about the thickness of the back panel.

Also cut a backer support for the seem of the back panel, probably 1/4'" to3/8", glue it on the back of seam for strength. Don't have any pics.

Hope all this helps you out. Be creative build it the way you want and mistakes are part of it. Day cabs can be a pain mainly lack of room for all electronics, like MFC with all it's components, and where to put the battery. But people do it all the time.

One more thing, I noticed your were looking for KH exhaust stacks. Don't know if you got them but I got some from "Semi Joes Truck Shop" on Ebay. Or run a search with part #'s. Will take 3 separate parts to make this up, but sometimes people sell as a unit. Search internet, will show up from time to time. The mesh part hard to find sometimes. I had to order in 3 separate pieces and different places to get mine. Waiting and searching for weeks.

Have fun!

Kausekaos

10-18-2015, 08:30 AM

Thanks for all that information, found it really helpful. I'll get extra clear and try different paints because I will be tinting the windows to hide the electronics. Not putting the seats and stuff, doubt I'll have room for them.

bigford

10-18-2015, 12:57 PM

brian from exclusive make a whole back panel with a rear window

tamiya fan

10-18-2015, 09:54 PM

Your welcome.

Kausekaos

10-19-2015, 01:32 AM

brian from exclusive make a whole back panel with a rear window

I'll ask him about it when i drop this off. Going to black, not a fan of the orange.
http://i45.photobucket.com/albums/f89/Kausekaos/20151008_205440.jpg (http://s45.photobucket.com/user/Kausekaos/media/20151008_205440.jpg.html)

Scott M

10-20-2015, 02:52 AM

Good work on the project, keep it up!!

Kausekaos

10-28-2015, 02:16 PM

Started test fitting some parts that came in. Drop Visor from ebay, Rc4wd Grill, Steve's Bumper and Air Cleaners. Bodywork should be done by next week, so then the Garden square pete lights can be mounted. Figured I show something since Reg has posted the start of the box.

http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20151028_140650_1.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20151028_140650_1.jpg.html)
http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20151028_140629.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20151028_140629.jpg.html)

Lucky7Dave

10-28-2015, 08:11 PM

Nice truck man, Where did you get the dump box I like it alot!

bigford

10-28-2015, 08:32 PM

http://www.rctruckandconstruction.com/forumdisplay.php?f=106

Kausekaos

10-28-2015, 09:11 PM

Also started this, Aeromax on Globeliner rails.
http://i45.photobucket.com/albums/f89/Kausekaos/20151028_193704.jpg (http://s45.photobucket.com/user/Kausekaos/media/20151028_193704.jpg.html)

tamiya fan

10-28-2015, 10:53 PM

The truck looks really good! So does the dump box Reg is doing for you, nice style. Should turn out to be a real nice truck. Are you going to have the dump bed painted or raw? What color are you going to paint the truck?

Kausekaos

10-28-2015, 11:09 PM

Its going to be painted. The colors I'm thinking is silver and black. I have a paint scheme in mind.

tamiya fan

10-28-2015, 11:54 PM

That should look good. Keep the pictures coming.

tamiya fan

10-29-2015, 12:59 AM

Is the construction trailer to pull behind the dump? Just saw it and was wondering. Did that with mine. The orange isn't that bad.

Kausekaos

11-02-2015, 07:23 PM

Yes that trailer is going to be pulled behind this. Orange didn't match the paint scheme I have in mind. Was bored today so I was messing around with some stuff. Put the stacks on. Hope to have this ready before the Half round gets here.

http://i45.photobucket.com/albums/f89/Kausekaos/20151029_010140.jpg (http://s45.photobucket.com/user/Kausekaos/media/20151029_010140.jpg.html)

Then I cut the Aeromax sleeper off and put it on the King Rails just to see how it would look with the other box I have.

http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20151102_191350.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20151102_191350.jpg.html)
http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20151102_191358.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20151102_191358.jpg.html)

Maybe I'll have shorter rails made or possibly do something like this.

http://i45.photobucket.com/albums/f89/Kausekaos/Screenshot_2015-10-26-23-01-28-1.png (http://s45.photobucket.com/user/Kausekaos/media/Screenshot_2015-10-26-23-01-28-1.png.html)

tamiya fan

11-02-2015, 08:49 PM

Sounds and looks good! For the frame rails, Semi Joe on Ebay sells different lengths and pre drilled for the King Hauler and others. (uncoated in silver look) When I post about him I seem to get grief from others, but I've dealt with him many times and no problems on my end. Check him out, makes life easier. Looks like your about 2" too long.

Kausekaos

11-04-2015, 08:43 PM

Kausekaos

11-04-2015, 09:10 PM

Got it forget it lol

Roundabout

11-06-2015, 05:27 PM

get rid of the dampers ;)

Kausekaos

11-06-2015, 05:29 PM

I got it to work. Here is how it sits. Yeah my livingroom is my work area lol
http://i45.photobucket.com/albums/f89/Kausekaos/20151104_214449.jpg (http://s45.photobucket.com/user/Kausekaos/media/20151104_214449.jpg.html)

Goal is to have the truck done by Cabin Fever 2016. So I can attend my first show with at least a working rig.

NORM

11-07-2015, 05:24 PM

nice mods, so far

Kausekaos

11-30-2015, 01:57 AM

The truck is with Brian getting a fresh coat of paint. Can't wait to get it back especially since I went with the paint job I really wanted. All I have left to do is add lights and sound when he's done painting. Still don't know if I should just go with a Tamiya MFU or not. I did get the trailer back. Here are pictures of it.

http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20151124_154755.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20151124_154755.jpg.html)
http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20151124_154805.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20151124_154805.jpg.html)
http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20151124_154817.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20151124_154817.jpg.html)
http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20151124_154855.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20151124_154855.jpg.html)
http://i45.photobucket.com/albums/f89/Kausekaos/20151124_154738.jpg (http://s45.photobucket.com/user/Kausekaos/media/20151124_154738.jpg.html)

tamiya fan

12-01-2015, 08:24 PM

The trailer looks good that color too! I'd recommend the MFU, they are great, everything in one package, and user friendly. But if it's going into a day cab things can get tight.(but doable) Is it going into the dump truck or a full size?

Kausekaos

12-02-2015, 09:44 AM

It would be going in to this Dump truck build. Day Cab project is on the back burner for now.

tamiya fan

12-02-2015, 09:12 PM

The MFU is great like I said (In my opinion). But in a dump truck space is tight, just like a day cab. I went with a "sabertooth" - RC model from Dimension Engineering. It is 2 ESC's in one. You can use 1 ESC to run the truck and the 2nd to operate the dump box. Two birds with one stone. Check it out. Your truck will work normally with this. Lighting, sound, vibration unit , and where to put the battery is another thing.

tamiya fan

12-02-2015, 09:22 PM

Another thing I did was to get a lighting kit (I believe G.T. Power - newer black colored one) It works to operate the lights like a MFC would, but the Chinese translation seems to be missing words and can be hard to follow, and the programming is a pain in a$$. But it works once you get it there. Just some thoughts.

jjackso5

12-02-2015, 09:41 PM

Could you tell me where or from who you purchased the trailer in your post? Please let me know. I'm building my fleet and thinking this could help make a good tool for the fleet.

Thank you,

Jim

Kausekaos

02-11-2016, 10:29 AM

Peterbilt Triaxle dump is still with ERC, king body was reacting to paint. In the meantime I sold the aeromax setup and bought another King setup to make a KW daycab. Bought the emblems of Garden just haven't mocked them up. Dont know if I should cut the bottom of the stacks because they don't clear the tanks and I want the tanks up front. Thank you Mario for the Air Cleaners. Here's what it looks like.

http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20160211_101733.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20160211_101733.jpg.html) http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20160211_101712.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20160211_101712.jpg.html)

1985 kenworth

02-14-2016, 11:55 PM

wow nice builds ..you are a very busy person my friend ..keep up the great work

Kausekaos

03-09-2016, 10:55 PM

Changed my original scheme a lil. But this is how it sits now. Once I figure out which direction to go with for lights and sound I can finish it.
http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20160309_220831.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20160309_220831.jpg.html) http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20160309_221056.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20160309_221056.jpg.html) http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20160309_221145.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20160309_221145.jpg.html)

Kausekaos

03-09-2016, 10:59 PM

This was what i was trying to recreate, before plans changed.
http://i45.photobucket.com/albums/f89/Kausekaos/20109_1.jpg (http://s45.photobucket.com/user/Kausekaos/media/20109_1.jpg.html)

Cre8rc

03-09-2016, 11:05 PM

Very nice machinery. Great work on all the builds.
Where did you get the reflective tape for the trailer?

Kausekaos

03-09-2016, 11:07 PM

Brian put in on when he repainted it black.

wolfws6

03-10-2016, 07:48 AM

Top notch build! I really like it!!!!

Kausekaos

03-10-2016, 02:07 PM

Test Fitted some parts
http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20160310_140244.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20160310_140244.jpg.html) http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20160310_140226.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20160310_140226.jpg.html) http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20160310_140217.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20160310_140217.jpg.html)

Kausekaos

03-10-2016, 03:27 PM

Bored & decided to snap some pictures. Waiting for parts to finish. Dont mind the visor it's not tighten on just yet.

http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20160310_151806.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20160310_151806.jpg.html) http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20160310_151851.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20160310_151851.jpg.html) http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20160310_152052.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20160310_152052.jpg.html)

Northern Farmer

03-10-2016, 04:04 PM

Looks bloody great :cool:

RCP57

03-10-2016, 04:42 PM

Is the cab bolted on? It seems really low? Love the truck!

Kausekaos

03-10-2016, 04:47 PM

Not yet Reg. Its just sitting on the base. Thanks guys. I cant take credit for the paint, Brian did a good Job. I'm just bolting and screwing thing's together.

Supermario

03-10-2016, 04:52 PM

That is one sweet looking rig! It's got such a great look to it and is clean.
She's a beauty for sure:):cool:

Kausekaos

03-10-2016, 05:04 PM

Thanks and thanks for the Cleaners for the white one Mario

Supermario

03-10-2016, 06:01 PM

Thanks and thanks for the Cleaners for the white one Mario

Glad I could help you out. The white one for sale is tempting but I've got enough conventionals and next truck must be a cabover.:) besides, you shouldn't have a problem selling it I'm sure. :)

Cossett

03-11-2016, 01:25 AM

Looks great and the trailer is the right length for it

Izzy

03-12-2016, 09:22 AM

Love the paint scheme.

JAMMER

03-12-2016, 12:32 PM

You have captured what you were trying to copy. Ed

tamiya fan

04-03-2016, 11:19 PM

Looks great, love the paint scheme!

JamesBC

04-06-2016, 12:12 AM

Great looking truck man.

Snowman

04-06-2016, 08:19 AM

Bad looking truck :cool:

Kausekaos

11-29-2016, 09:38 PM

Been a while figured I throw some pics in here. Still have some wiring to do, and paint for the daycab as well as more wiring...

http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/IMG-20161129-WA0004.jpeg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/IMG-20161129-WA0004.jpeg.html)
http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/received_10154712107278187.jpeg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/received_10154712107278187.jpeg.html)
http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/20161129_203331.jpg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/20161129_203331.jpg.html)http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/received_10154712478263187.jpeg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/received_10154712478263187.jpeg.html)http://i45.photobucket.com/albums/f89/Kausekaos/Mobile%20Uploads/received_10154712484068187.jpeg (http://s45.photobucket.com/user/Kausekaos/media/Mobile%20Uploads/received_10154712484068187.jpeg.html)