Barebones E11

[Radar]

Ok guys here are some pic of the bulldozer sorry about the quality I was in a hurry but I will get better ones. I'm working on this with my dad at his shop we are going to start with the tracks and carring rollers
http://i1379.photobucket.com/albums/ah132/brianreillychelseapr/EBDD702B-D437-4A8D-9DC1-BD6036589FE2_zpsqugqntla.jpg (http://s1379.photobucket.com/user/brianreillychelseapr/media/EBDD702B-D437-4A8D-9DC1-BD6036589FE2_zpsqugqntla.jpg.html)
http://i1379.photobucket.com/albums/ah132/brianreillychelseapr/15D848F7-C06F-4671-873D-F0763BDA6CEE_zpssyhcghwd.jpg (http://s1379.photobucket.com/user/brianreillychelseapr/media/15D848F7-C06F-4671-873D-F0763BDA6CEE_zpssyhcghwd.jpg.html)
http://i1379.photobucket.com/albums/ah132/brianreillychelseapr/6FC2C9D4-BD94-4D32-B2E8-B8F33FE36410_zpsahe68edn.jpg (http://s1379.photobucket.com/user/brianreillychelseapr/media/6FC2C9D4-BD94-4D32-B2E8-B8F33FE36410_zpsahe68edn.jpg.html)

[speedy8305]

I am a lil confused after checking their website out the Pics above look a lil short of what they advertise on their site as far as the quality of workmanship you get when you purchase from them .

[bigford]

CALLING cooper!!!!

what are your thoughts a$$ load of work to make it r/c or $2000 load for a lowboy?

[Radar]

I am a lil confused after checking their website out the Pics above look a lil short of what they advertise on their site as far as the quality of workmanship you get when you purchase from them .

I think on the web sit thay measure it with the riper on it I have the ripper remove in these pic

[Radar]

CALLING cooper!!!!

what are your thoughts a$$ load of work to make it r/c or $2000 load for a lowboy?

Yes it will be a lot of work but in the end I think it will be sweet! I think it's a good shell to start with

[ing85]

Good Job Friend :-)

[Cooper]

Any way you can take the top off, and the cab part to take a pic of inside area? And how wide is it in there? If enough room for the motors I put in the d11 that would be great, couple years so far and a lot of hard pushing they have been powerhouses!! Windshield wiper motors from robot market place, left and right. I did have to gear them down and alter output shafts but well worth it.

[titandigs]

I have been away for a while, who makes this model?

[bigford]

barebones the guys that make the cat 390 excavator

[Radar]

Any way you can take the top off, and the cab part to take a pic of inside area? And how wide is it in there? If enough room for the motors I put in the d11 that would be great, couple years so far and a lot of hard pushing they have been powerhouses!! Windshield wiper motors from robot market place, left and right. I did have to gear them down and alter output shafts but well worth it.

Hay cooper I have some great pics of the inside of the dozer but I'm having trouble with photo bucket on my phone. The inside of it is 5 in wide I hope that that is enough room for motors like u put in yours. I will get this photo bucket thing fix and get pics up thx for looking

[bigford]

UPDATES!!!!!

[Radar]

Nothing yet been building a house not much time for hobbies at the moment��

[Radar]

http://i1379.photobucket.com/albums/ah132/brianreillychelseapr/IMG_20160511_193218301_zpszehx6dza.jpg (http://s1379.photobucket.com/user/brianreillychelseapr/media/IMG_20160511_193218301_zpszehx6dza.jpg.html)
http://i1379.photobucket.com/albums/ah132/brianreillychelseapr/IMG_20160511_193152187_zpsgnero5jz.jpg (http://s1379.photobucket.com/user/brianreillychelseapr/media/IMG_20160511_193152187_zpsgnero5jz.jpg.html)
http://i1379.photobucket.com/albums/ah132/brianreillychelseapr/IMG_20160511_193147917_zps88qcnqk6.jpg (http://s1379.photobucket.com/user/brianreillychelseapr/media/IMG_20160511_193147917_zps88qcnqk6.jpg.html)
http://i1379.photobucket.com/albums/ah132/brianreillychelseapr/IMG_20160511_193137009_zpsykqyt5ij.jpg (http://s1379.photobucket.com/user/brianreillychelseapr/media/IMG_20160511_193137009_zpsykqyt5ij.jpg.html)
Small up date on the dozer made new rollers and got new chain for the tracks it should hold up better then what was supplied with the model i hope thx for lookin

[Radar]

http://i1379.photobucket.com/albums/ah132/brianreillychelseapr/Mobile%20Uploads/IMG_20160608_184453784_zpsepgutrlj.jpg (http://s1379.photobucket.com/user/brianreillychelseapr/media/Mobile%20Uploads/IMG_20160608_184453784_zpsepgutrlj.jpg.html)
Under carage almost done
http://i1379.photobucket.com/albums/ah132/brianreillychelseapr/Mobile%20Uploads/IMG_20160608_184442412_zpsfw3brm3q.jpg (http://s1379.photobucket.com/user/brianreillychelseapr/media/Mobile%20Uploads/IMG_20160608_184442412_zpsfw3brm3q.jpg.html)
Made a simple jig to hold the chain and the track pad square going to start welding going to need a spray bottle of water to keep wood cool but it should work

[bigford]

only real problem I see so far is they didn't add a track tensioner assembly

[Radar]

The front idler is adjustable but it's not spring loaded

[RCP57]

The front idler is adjustable but it's not spring loaded

That's not good.