Fat stacks

[jared31]

Looking for a set of fat stacks for my wedico Pete. Contacted snochaser and he's not going to have any for a year. Any ideas?

[TRUCKMAKER]

Make your own.

[bigford]

check your pm

[bigford]

Make your own.
that works if you want brass stacks or painted ones

[TRUCKMAKER]

My first truck has K&S aluminum tubing, with a little elbow grease polished up to a chrome like finish. Cut them to what ever length you want with whatever tip you want.

[fhhhstix]

You will just need to improvise on the elbows.


http://www.lowes.com/pd_195291-73838-4502L-CP_1z13dk8__?productId=3132093&pl=1&Ntt=chrome

or


http://www.lowes.com/pd_195291-73838-5577-CP_1z13dk8__?productId=3132109&pl=1&Ntt=chrome

[Izzy]

I use plumbing parts from the bath and sink area on my first builds. but they were not that fat. I say search around - you may find something like a towel holder or similar with suitable parts for cheap until you can get custom stuff from 'snochaser later.

BTW - the new grand hauler has some nice fat stacks - no bend at the top just straight. but they are larger, and full length chrome tube as well..

[fhhhstix]

I use plumbing parts from the bath and sink area on my first builds. but they were not that fat. I say search around - you may find something like a towel holder or similar with suitable parts for cheap until you can get custom stuff from 'snochaser later.

BTW - the new grand hauler has some nice fat stacks - no bend at the top just straight. but they are larger, and full length chrome tube as well..

Look at the rest of your kit Izzy the stacks do have turn outs.

[Izzy]

:cop:Well I'll be called a monkeys uncle for overlooking that detail.