View Full Version : mfu problem
tippa
01-16-2016, 04:21 PM
hi all I am in need of some guidance please ...when mounting the mfu in a grand hauler I have found that the wires from tail lights and from front servos are short ... I have hunted for a link about it on here but to no avail ...mr andersons mean and lean has helped but .. I still come up short ...any ideas :confused:
Trucker Al
01-16-2016, 08:21 PM
Simply cut the cable and add wire as needed. I do this all the time. Be sure to insulate the connections with tape.
mavrick0
01-16-2016, 11:54 PM
If you are comfortable cutting and soldering you can buy servo extensions from your local hobby shop or online and I believe Astec out of the UK makes extensions for the MFC lights if not I'm sure you can e-mail him and he can make you some.
Cossett
01-17-2016, 01:50 AM
For the MFU I would use small servo extention cables and the lights I would cut and solder then heat sink the wires,
Cheers Tracy
tippa
01-21-2016, 01:17 AM
thanks all ......sounds like a plan .....regards tippa
GlobelinerBrad
01-23-2016, 12:33 PM
I just installed servo extensions on my stock Knight Hauler yesterday. Motor wires are just barely long enuff. I have the large speaker box which mounts the mfu toward the rear of the cab space.
vBulletin® v3.8.6, Copyright ©2000-2024, Jelsoft Enterprises Ltd.