KH Beam Hauler

[Bo Wallen]

MIP-Day over. The # 43 Got new spinners :D

https://farm5.staticflickr.com/4351/37073667365_488847ece0_b.jpg (https://flic.kr/p/Yu5eFt)IMG_1665 (https://flic.kr/p/Yu5eFt) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr


https://farm5.staticflickr.com/4438/36885269526_e06ba63c5e_b.jpg (https://flic.kr/p/YcqDyS)IMG_1663 (https://flic.kr/p/YcqDyS) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr


Some more details and tweaks this one is ready for duty.

[kerst]

Looks good!

Kerst

[Bo Wallen]

Looks good!

Kerst


Thank You Kerst. Glad you approved that design. :) It's going to be all over the Beam-Hauler Fleet. :D

[Bo Wallen]

?????????

Question : White Or Yellow Bolster ?


https://farm5.staticflickr.com/4434/36985960586_e31977be59_b.jpg (https://flic.kr/p/YmjHvC)IMG_1681 (https://flic.kr/p/YmjHvC) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm5.staticflickr.com/4234/35194296341_443e366016_b.jpg (https://flic.kr/p/VBZY9M)IMG_1314 (https://flic.kr/p/VBZY9M) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm5.staticflickr.com/4392/36985961256_7a77c17ef2_b.jpg (https://flic.kr/p/YmjHHb)IMG_1682 (https://flic.kr/p/YmjHHb) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm5.staticflickr.com/4351/37073667365_488847ece0_b.jpg (https://flic.kr/p/Yu5eFt)IMG_1665 (https://flic.kr/p/Yu5eFt) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

While i got the painting going..........

[frizzen]

Yellows probably more realistic, wouldn't show grease and road grime as much. But i kinda like white, it would help highlight how much stuff is happening with the load.

[Bo Wallen]

Good thinking there Frizzen.........I can make 5 yellow and 5 white set's :jaw:
Compromise is the way to go......:D

[Bo Wallen]

Last bit tonight.

https://farm5.staticflickr.com/4441/37179421305_438fa2df8f_b.jpg (https://flic.kr/p/YDqfDg)IMG_1686 (https://flic.kr/p/YDqfDg) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm5.staticflickr.com/4384/37179422055_d285e4fe68_b.jpg (https://flic.kr/p/YDqfSc)IMG_1685 (https://flic.kr/p/YDqfSc) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Hostile]

I agree with Frizzens comment. Looking amazing Bo. The attention to detail is phenominal

[Lil Giants]

So when do we see a few pics of the new additions in service? Load 'er up!

[Bo Wallen]

I agree with Frizzens comment. Looking amazing Bo. The attention to detail is phenominal

So when do we see a few pics of the new additions in service? Load 'er up!

Thanks Hostile. I appreciate all comments and input very much. I'm freeballing this project so i have no idea where it ends. But i have fun now when i don't have to travel for work so much. I love driving this thing around so Joe i'm aiming for Cabin Fever PA 2018 Seems so far away. I'm thinking i've got a few rigs ready by the time that can perform kind of well....so i hope anyway. I really enjoy watching the Saskatchewan Tunneling project, A good time in the recliner chair. Keep it going Joe.

[Bo Wallen]

Today this little baby showed up in front of me...........for 50 bucks it was instant love.......So now i can create more and better stuff for the Bo-Dog's

https://farm5.staticflickr.com/4415/36379631644_06e45120b2_b.jpg (https://flic.kr/p/XqK83m)IMG_1701 (https://flic.kr/p/XqK83m) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

:D

[Hostile]

Where did you score that little beauty Bo? Wouldnt mind one myself

[Bo Wallen]

Where did you score that little beauty Bo? Wouldnt mind one myself

Thanks Hostile. That little one was sitting on the floor with a green pricetag on it............It said $50........Had to wipe my eyeglasses and have one other look.........yes still same number....I grabbed that thing so fast and went to the cashier Paid and throw it in the car. Got back in the shop and did a few more small finds. The sad part is that it is my LHS that closes the doors forever.

[kerst]

That is nice, especially for that price!

Kerst

[Hostile]

Sad to hear about the LHC but amazing haul. Well done on the score!

[ditchdigger]

You get much tooling with it?

[Finster]

This is probably a silly question, but what do you mean by LHC?

[Bo Wallen]

This is probably a silly question, but what do you mean by LHC?

A slight misprint 🚧 Should say LHS Local Hobby Shop

[skeeter]

Remember the broken axle ? This is how i fixed that bugger.

https://farm5.staticflickr.com/4333/36987665765_448b7fa166_b.jpg (https://flic.kr/p/Ymtspg)IMG_1649 (https://flic.kr/p/Ymtspg) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm5.staticflickr.com/4437/36987667035_daea459201_b.jpg (https://flic.kr/p/YmtsMa)IMG_1648 (https://flic.kr/p/YmtsMa) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm5.staticflickr.com/4341/36987666455_ac0447e954_b.jpg (https://flic.kr/p/YmtsBa)IMG_1647 (https://flic.kr/p/YmtsBa) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Now i can haul a lot heavier loads......


The jack stands, Where did you buy them from?

[Bo Wallen]

Skeeter. I'm Not sure. Out of town this weekend. Racing my Buggy at Vintage Offroad Nationals. I will get back to you after race.

[frizzen]

Harbor freight atleast used to carry some like that.
I know you can find them on Rc4wd and amazon. Search 'Mini jack stands' should get a bunch of hits.

[Bo Wallen]

Back In The Bo-Dog Shop after Some R/C Competition last weekend.

https://farm5.staticflickr.com/4415/36907898270_f9d08210d8_b.jpg (https://flic.kr/p/YeqCiC)IMG_1761 (https://flic.kr/p/YeqCiC) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Picture of the pit ;o)

Skeeter i got this jacks from Big Red Promo. Kind of big. the small ones are 1:18 lill small.

https://farm5.staticflickr.com/4400/36931043370_723d70e7b5_b.jpg (https://flic.kr/p/Ygtfx5)IMG_1789 (https://flic.kr/p/Ygtfx5) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Bo Wallen]

Bo-Dog # 49 Pole-Trailer Special to be revealed in a short while.................Stay Tuned :D

https://farm5.staticflickr.com/4335/36521811573_cdb189bf88_b.jpg (https://flic.kr/p/XDiQbr)IMG_1790 (https://flic.kr/p/XDiQbr) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Just need to finnish coffee and open the box :)

[Bo Wallen]

Coffee Done. Box Open. Here it is.

Pole-Trailer XXL.

https://farm5.staticflickr.com/4372/36539573433_881d0fe6a1_b.jpg (https://flic.kr/p/XESSap)IMG_1797 (https://flic.kr/p/XESSap) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm5.staticflickr.com/4331/36539575003_00a5563fd0_b.jpg (https://flic.kr/p/XESSCt)IMG_1798 (https://flic.kr/p/XESSCt) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm5.staticflickr.com/4385/36539576303_60704817b8_b.jpg (https://flic.kr/p/XEST1T)IMG_1799 (https://flic.kr/p/XEST1T) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm5.staticflickr.com/4364/36539580373_774644f205_b.jpg (https://flic.kr/p/XESUe4)IMG_1801 (https://flic.kr/p/XESUe4) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Next....Nap-Time.

[kerst]

Wow, you really churn them out!

Kerst

[Bo Wallen]

Thanks Kerst ;o) It's Friday time to Jack It Up a notch......;o)

https://farm5.staticflickr.com/4504/37395739355_156c0a6ac0_b.jpg (https://flic.kr/p/YYwWsP)IMG_1804 (1) (https://flic.kr/p/YYwWsP) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

The soldiers are ready for support......

[Northern Farmer]

:eek: You sure you have enough stands ? :D

[Bo Wallen]

:eek: You sure you have enough stands ? :D

No !

[skeeter]

The diamond plate decking for the trailers, Where do you acquire that from? How big are the sheets it comes in? Do they also have scale expanded metal?

[skeeter]

Back In The Bo-Dog Shop after Some R/C Competition last weekend.

https://farm5.staticflickr.com/4415/36907898270_f9d08210d8_b.jpg (https://flic.kr/p/YeqCiC)IMG_1761 (https://flic.kr/p/YeqCiC) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Picture of the pit ;o)

Skeeter i got this jacks from Big Red Promo. Kind of big. the small ones are 1:18 lill small.

https://farm5.staticflickr.com/4400/36931043370_723d70e7b5_b.jpg (https://flic.kr/p/Ygtfx5)IMG_1789 (https://flic.kr/p/Ygtfx5) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Thank-you Sir for the info.

[Hostile]

Nice work Bo. When do we get to see the new set all hooked up for running?

[Bo Wallen]

Nice work Bo. When do we get to see the new set all hooked up for running?

Thanks Hostile ;o) Hope to make the load for # 49 this weekend and paint it too. The load for # 43 is in the paint shop. #44 is done # 45 is in Paint shop.
# 46-48 are in build stage still. No Lack of fun at this point. And the rest....Oh Lord :lol:

[Bo Wallen]

Thank-you Sir for the info.

Your welcome Skeeter.

[Bo Wallen]

You get much tooling with it?

Just a few things Not important for that price. The fun thing is the week before i purchased a 6 inch chuck to put in my drill press for $ 50 to mount on a indexing plate. Sorry for late response. :)

[Northern Farmer]

The diamond plate decking for the trailers, Where do you acquire that from? How big are the sheets it comes in? Do they also have scale expanded metal?

Here you go
http://www.rcbrmin.com/index.php?main_page=product_info&cPath=66_77&products_id=858
http://www.rcbrmin.com/index.php?main_page=product_info&cPath=66_77&products_id=408

[Bo Wallen]

Here you go
http://www.rcbrmin.com/index.php?main_page=product_info&cPath=66_77&products_id=858
http://www.rcbrmin.com/index.php?main_page=product_info&cPath=66_77&products_id=408

Good info here Brandon.
I did use the two original Top Plate From the pole-trailer on the # 49
but next time i'm going for diamond plate decking by RCBRMIN ;o)

[sassgrunt]

If you're looking for expanded metal material; try the steel office supply items like wastebaskets, desk organizers, pencil holders, etc. I have found them painted black or silver at Office Depot and even Wal-Mart. They are made with a round tube framework, to which the expanded metal-looking screen is welded. If you buy a large piece (a wastebasket, for example) and cut away the frame; you end up with a large sheet of strong screen material that you can cut to whatever size you need. You'll have to frame it with something though, as the raw edges are sharp! -Mike

[Bo Wallen]

Thanks Sassgrunt.

Excellent tips ! It's so much stuff out there we can use with just a tiny mod.
My wife just lost her wastebasket...:jaw: I'm sure she will give me s**t soon very soon.........Hard Hat ON !

[skeeter]

Good info here Brandon.
I did use the two original Top Plate From the pole-trailer on the # 49
but next time i'm going for diamond plate decking by RCBRMIN ;o)

Thank-you sir, for the links! :bounce:

[skeeter]

If you're looking for expanded metal material; try the steel office supply items like wastebaskets, desk organizers, pencil holders, etc. I have found them painted black or silver at Office Depot and even Wal-Mart. They are made with a round tube framework, to which the expanded metal-looking screen is welded. If you buy a large piece (a wastebasket, for example) and cut away the frame; you end up with a large sheet of strong screen material that you can cut to whatever size you need. You'll have to frame it with something though, as the raw edges are sharp! -Mike

Thanks for the tip! I NEVER though of that! I'll be making a trip to Fred Meyers very soon, to see what I can find!

[Bo Wallen]

Oh Lordi Lordi She discovered the Bin was gone..........Wish You guys could have seen and heard that reaction.............:D
She lost this.....

https://farm5.staticflickr.com/4506/37013703930_272550f710_b.jpg (https://flic.kr/p/YoLUD9)IMG_1813 (https://flic.kr/p/YoLUD9) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

I had to go to my wood shop and make this one......

https://farm5.staticflickr.com/4507/37411858995_ae7fe539e7_b.jpg (https://flic.kr/p/YZXygD)IMG_1814 (https://flic.kr/p/YZXygD) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Everything ended well Nobody got injured. I even got a smile from her.

[sassgrunt]

Check the mesh of your basket against whatever they're selling in the office products section. For some reason, when I look at your photo, it seems like the mesh is larger than the one I found, (maybe it's just me). When I measure the mesh with a ruler, I find that the height of the 'diamonds' are 4 to the inch, and (measuring diagonally and counting the width of the 'diamonds') they are 7 to the inch. But, unless your dimensions are radically different, then it probably doesn't matter all that much - was just curious if there are different sizes out there.

[Bo Wallen]

Check the mesh of your basket against whatever they're selling in the office products section. For some reason, when I look at your photo, it seems like the mesh is larger than the one I found, (maybe it's just me). When I measure the mesh with a ruler, I find that the height of the 'diamonds' are 4 to the inch, and (measuring diagonally and counting the width of the 'diamonds') they are 7 to the inch. But, unless your dimensions are radically different, then it probably doesn't matter all that much - was just curious if there are different sizes out there.

Yes that's right this one is kind of large. I'm using this for a special thing, will show later when finished. There is a lot of different sizes out there so a shopping around is a must to find your style. Hit the mall.

[Zabco]

If you ever get rid of an old microwave oven, the metal mesh in the door window is perfect for this use. Most of these doors are held together with a dozen or so screws and come apart pretty easily. The metal used is pretty thin and will bend or kink if you aren't careful when handling it.

[Bo Wallen]

If you ever get rid of an old microwave oven, the metal mesh in the door window is perfect for this use. Most of these doors are held together with a dozen or so screws and come apart pretty easily. The metal used is pretty thin and will bend or kink if you aren't careful when handling it.

Good idea..............No No not our micro..........i go to the dump with my cordless and screw it up......lol They have Gossip meeting on Saturdays.

[Bo Wallen]

There is a slight pause on this build, Waiting for parts to arrive from far away.

During this i'm working on the MB Heavy Haul and you can see that on Big Boys of the road page.

Thank You All For Looking It's Really Inspiring to see that kind of interests, from you all.
Bo

[Bo Wallen]

Just a tiny thing. Baby Moon.......Yes or No ?

https://farm5.staticflickr.com/4486/23754191328_2c54d20be3_b.jpg (https://flic.kr/p/Cc5ruU)IMG_1857 (https://flic.kr/p/Cc5ruU) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Bo Wallen]

Got Registration plates :)

[img]https://farm5.staticflickr.com/4479/37742577011_ec88e045df_b.jpg (https://flic.kr/p/Zvbzdp)IMG_1878 (https://flic.kr/p/Zvbzdp) by [url=https://www.flickr.com/photos/47955920@N04/
Street Legal Finally.......:D

[Bo Wallen]

One more Street Legal :cop:

https://farm5.staticflickr.com/4480/37445751670_5c0d365b71_b.jpg (https://flic.kr/p/Z3Xgo7)IMG_1866 (https://flic.kr/p/Z3Xgo7) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[frizzen]

Thats looking slick. Grill guard is really cool

[Bo Wallen]

Thanks Frizzen :)

https://farm5.staticflickr.com/4488/37742576481_bc7f50fa21_b.jpg (https://flic.kr/p/Zvbz4g)IMG_1877 (https://flic.kr/p/Zvbz4g) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[jjackso5]

Bo, where did you get your license plates? They look great, nice addition to the overall truck.

Thank you,

Jim

[Bo Wallen]

Bo, where did you get your license plates? They look great, nice addition to the overall truck.

Thank you,

Jim

Thank You Jim.

The License Plates i've got from : www.krawlerkonceptz.com/ Michelle & Rob Boutilier.
Absolutely wonderful to work with. supernice quality . From now on they are my Main source for signs and decals.

[Bo Wallen]

There is signs of activity somewhere here........:D


https://farm5.staticflickr.com/4467/37416126464_5831d58218_b.jpg (https://flic.kr/p/Z1kqQG)IMG_1896 (https://flic.kr/p/Z1kqQG) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Panther F]

Sorry I missed the update... I like where this is going! :D

[Bo Wallen]

Thank You Panther F :)

Well i'm consuming hardware like crazy so i ordered m3 nuts and there is no lack of what people can come up with..........https://farm5.staticflickr.com/4586/24383254218_9ec18aa876_b.jpg (https://flic.kr/p/D9ExYN)IMG_1916 (https://flic.kr/p/D9ExYN) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Spend some time unpacking those suckers !!!...Why pack this way ??? why ??

Got some other stuff in the mail too :D

https://farm5.staticflickr.com/4521/24383253728_2e8a6c0368_b.jpg (https://flic.kr/p/D9ExQm)IMG_1914 (https://flic.kr/p/D9ExQm) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Assembly can start soon i hope..........Ben hoarding stuff for sometimes now:cool:

[Hostile]

Haha love it Bo!

[RCP57]

Looks like your little nuts came in giant boxes.:eek: Seriously though, WTF? 15 in one box? What a waste of packaging.

[Panther F]

For us mere mortals, the boxes are too much overkill but to them it would cost way too much to retool a smaller box, then they don't sit in the distribution center or delivery box correctly.

It's funny, but everyone does it. If they can reuse a large box, the smaller part(s) go in and they save money.

I've seen it with aftermarket car electronic parts (back in the old days) and some just don't want to change over so to them, it's not a waste.


Anyway, back to the build... I love the bumper dressing here. The lettering and the diagonal stripes sure make a bold statement and if I ever wanted to make a hauler of some sort, I'll need those black and yellow bumpers. And I do appreciate the many pictures taken on what you have done so far. It helps motivate me to get something done.

[Bo Wallen]

Well Panther i'm slowly recover from unboxing the Nuts.....:eek: And outside is cold and gnarly.........Why not mess around with the Lathe and make some ultra super wide wheels.

https://farm5.staticflickr.com/4580/38487783751_9e1339ebe0_b.jpg (https://flic.kr/p/21D2Xdt)IMG_1921 (https://flic.kr/p/21D2Xdt) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr
https://farm5.staticflickr.com/4519/37600797545_a4370fc8e9_b.jpg (https://flic.kr/p/ZhDV7R)IMG_1922 (https://flic.kr/p/ZhDV7R) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Not too bad for a first attempt if i may say so............:D

[Panther F]

Whoa... super sweet.

[Northern Farmer]

Wheels came out great Bo I like that deep dish :cool:

[Bo Wallen]

Whoa... super sweet.

Wheels came out great Bo I like that deep dish :cool:

Thanks Guys ;o) A bit tweaking and some paint Should do the trick i hope.

That little Lathe is so sweet to work with. Of Course i couldn't leave that in original state. I have been modding some crucial parts and now i'm happy with the performance. More of that and some picture On a screen near you soon.

[Hostile]

Excellent work there bo. Looking great!

[skeeter]

Those wheels are kick @ss looking!

[Bo Wallen]

Excellent work there bo. Looking great!

Those wheels are kick @ss looking!

Thanks Hostiie & Skeeter.

Was fun to do and when it came out this good in round one, I wanna make some more slightly different just to see what looks the best. :D So don't go too far away from your screen.........it might happen this weekend

[FabOne]

AWESOME job Bo!

-Terry

[Zabco]

Were the hubs 3D printed?

[skeeter]

What did you use to machine, is that household PVC pipe?

[Bo Wallen]

AWESOME job Bo!

-Terry

Were the hubs 3D printed?

What did you use to machine, is that household PVC pipe?

Thank You Terry :) Thanks for asking Zabco :) No it's not. I put King Hauler rims in Chlorine and got rid of the Chrome. Skeeter You Nailed that one :lol: It's leftover PVC schedule 40 i think the name is. No need to cut down rear rims to get what i want...........The fleet is running white spinners anyway :D

I'm working to document how to do this...........or should i say how i do it. I hope i can geterdone tonight. Anyway Picture is coming soon to your screen.

[skeeter]

AWESOME! It'll be a GREATtutorial when it's done. Nice job thinking outside the box on that. I wouldn't have thought :thinking: to use that to make a rim with.

[Zabco]

Thank You Terry :) Thanks for asking Zabco :) No it's not. I put King Hauler rims in Chlorine and got rid of the Chrome.

Thanks for reply, I asked because the lighting in your photo made the hubs look alot like some rims I tried 3d printing some time ago. Was going to ask you how much effort it was to smooth them out as much as it appeared you had. I really like your idea though of mixing the hub portion of a standard wheel with the machined pvc. I think I'm going to try that just using 3D printed hubs. If nothing else will save a lot of support material and make cleanup much easier.

[Bo Wallen]

Hey Ya All ! The Wheels Tutorial is under production.........Jeez it's a lot of work to make it worth to show. Please have patient and it will pop up here right in front of your eyes :D

https://farm5.staticflickr.com/4525/37659177535_66521ea7a9_b.jpg (https://flic.kr/p/ZnP8sp)IMG_1940 (https://flic.kr/p/ZnP8sp) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Teaser In Chrome and Crazy Wide :)

[Bo Wallen]

Testing the Ultra Wide on the Old Globe.

https://farm5.staticflickr.com/4535/38496102986_460fafd1ea_b.jpg (https://flic.kr/p/21DLAey)IMG_1946 (https://flic.kr/p/21DLAey) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

:D

[Bo Wallen]

Short update of the fix for the broken trailer axle.
I've got some time to make the sleeve for all trailer axles that use std.axle.
From now on i go full metal axles.

https://farm5.staticflickr.com/4564/27065416399_27776832ce_b.jpg (https://flic.kr/p/HeFkmk)IMG_1989 (https://flic.kr/p/HeFkmk) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm5.staticflickr.com/4580/27065416869_060d9c064d_b.jpg (https://flic.kr/p/HeFkur)IMG_1984 (https://flic.kr/p/HeFkur) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

The Tutorial of wide rims is still under production.........more time needed and a few tools too.

[Bo Wallen]

Production run done. Check ;o)
Now Installing them sleeves.

https://farm5.staticflickr.com/4539/38846873022_43f97dcdc2_b.jpg (https://flic.kr/p/22bLnWN)IMG_1991 (https://flic.kr/p/22bLnWN) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm5.staticflickr.com/4573/38876999301_8e29757bd3_b.jpg (https://flic.kr/p/22eqMrp)IMG_1992 (https://flic.kr/p/22eqMrp) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Forgot to say........400% stronger/heavier load with da fix.......I'll take that any day !

[Zabco]

How do you like the little chop saw? Is that one of the Micro-Mark ones? I've got a project I'm planning that is going to call for a ton of brass cutting and I'm thinking of getting one.

[Bo Wallen]

How do you like the little chop saw? Is that one of the Micro-Mark ones? I've got a project I'm planning that is going to call for a ton of brass cutting and I'm thinking of getting one.

Yes i like it a lot. https://www.harborfreight.com/2-in-mini-bench-top-cut-off-saw-62136.html
How to avoid cutting fingers in a 12 inch chopsaw this is great for small pieces.

A few things to think of.
1. weak motor stall easy. Use cutting oil and it cut easy.
2. sawblade get clogged easy. Use more cutting oil. Problem solved.
3. Take your time and don't overcharge the sucker...... job done.
4. Did i mentioned screw it to a sturdy surface.........otherwise you will mess up your work of art.
Have Fun.

Is it the best saw out there ??? Probably NOT but for $34.99 i will say it's doing a lot of cutting.

[Zabco]

Thanks alot for info Bo. Got two harbor freight stores near me so I'm going shopping tomorrow.

[kerst]

How do you like the little chop saw? Is that one of the Micro-Mark ones? I've got a project I'm planning that is going to call for a ton of brass cutting and I'm thinking of getting one.

I bought it to cut brass tubes for the boom of the Demag TC500. It worked great. I made a special vice for the job. It made a nice clean cut and saved me a lot of time.

Kerst

[Panther F]

Still following and salivating over the progress. :bounce:

[Zabco]

I bought it to cut brass tubes for the boom of the Demag TC500. It worked great. I made a special vice for the job. It made a nice clean cut and saved me a lot of time.

Kerst

Picked one up today. Does indeed work well and I'm pleased with it. Only issue is that the blade clamp screw keeps working loose. Nothing that a drop of loctite probably can't fix. Great little machine for less than half the cost of the one I was looking at. Thanks guys.

[Bo Wallen]

Thanks alot for info Bo. Got two harbor freight stores near me so I'm going shopping tomorrow.

I bought it to cut brass tubes for the boom of the Demag TC500. It worked great. I made a special vice for the job. It made a nice clean cut and saved me a lot of time.

Kerst

Still following and salivating over the progress. :bounce:

Picked one up today. Does indeed work well and I'm pleased with it. Only issue is that the blade clamp screw keeps working loose. Nothing that a drop of loctite probably can't fix. Great little machine for less than half the cost of the one I was looking at. Thanks guys.


Zabco. Kerst. Yes nothing is like affordable cool tools.....gives some space for the other bling parts we really need.
So i was so impressed with this little bugger....... I went and picked up a couple more. I'm building a souped up table saw with sliding table and bigger motor.......:D

[Bo Wallen]

Tamuder Shop Truck Deluxe.

https://farm5.staticflickr.com/4731/24108314317_a6472f9ab0_b.jpg (https://flic.kr/p/CJnpVF)IMG_1994 (https://flic.kr/p/CJnpVF) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

While waiting for tools and other stuff for the Wheel tutorial. I'm finishing this one. Don't look to close......the wood is just for sizing up toolbox.....

[egronvold]

Nice little truck :)

[markturbo]

Nice work. I was just looking at one of those little chop saws and was thinking about getting one.

[Bo Wallen]

Nice little truck :)

Nice work. I was just looking at one of those little chop saws and was thinking about getting one.

Thank You ergonvold :) and markturbo :)

Cabin Fever is getting closer and closer. Trying to get ready :eek:

https://farm5.staticflickr.com/4646/39511562192_486df73b4a_b.jpg (https://flic.kr/p/23cv5SU)IMG_2040 (https://flic.kr/p/23cv5SU) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Northern Farmer]

Sweet company logo :cool:

[Bo Wallen]

Sweet company logo :cool:

Thank You Brandon. Michelle at Krawler Konceptz Is so fantastic to deal with, and the quality is over the top ! She is making the Canadian plates now for me.....:lol: kind of need to build more fun stuff to put them on. Reg i need more parts........after you're done with the boat....:lol:

[Bo Wallen]

The Globe Goes back to shop. Lost reverse funktion. :eek:
https://farm5.staticflickr.com/4670/39723949031_48c976f991_b.jpg (https://flic.kr/p/23wgC5X)IMG_2119 (https://flic.kr/p/23wgC5X) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Bo Wallen]

The Globe was crawling around pretty good in the excellent dirt. The ESC finally gave up after 25 years of abuse.

https://farm5.staticflickr.com/4605/24855728747_79f96293df_b.jpg (https://flic.kr/p/DSq7cn)IMG_2067 (https://flic.kr/p/DSq7cn) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Cooper's Mining Truck is gigantic.......

[skeeter]

25 yrs, I'd say you got yer $ worth outta that one.

[Bo Wallen]

Yes i did. Was used for years in 1/10 buggy racing and the last five years in the Globe. Wondering if i should change motor also......5 years in the Globe it felt weak the last day........:D

[Bo Wallen]

Crowd........:)

https://farm5.staticflickr.com/4628/39736398041_37cc69962a_b.jpg (https://flic.kr/p/23xnqK4)IMG_2080 (https://flic.kr/p/23xnqK4) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[egronvold]

A popular man;)

[Bo Wallen]

A popular man;)

Oh No !!! But all our vehicles and Machines are absolutely superstars !!!

So when are you coming over to see us ??? Next year maybe....? Would love to host you at this event, You are now officially invited. :) Set the dates : January 18-19-20-2019

[egronvold]

Thanks! I'll try to schedule a meeting around that time :) Were supposed to go to Connecticut in January, but is's been postponed to March...

[Bo Wallen]

Thanks! I'll try to schedule a meeting around that time :) Were supposed to go to Connecticut in January, but is's been postponed to March...

Great I live in NW CT You're welcome to drop in. If you can schedule a meeting around Cabin Fever I'll make sure the logistic will work for you. Transport, Hotel, etc. if needed.

[frizzen]

...
https://farm5.staticflickr.com/4605/24855728747_79f96293df_b.jpg ...

Stupid question since i haven't seen beam haulers moving off highway. Should the lower hinge link / frame extension have some kind of red flag or some lighting? I know more than 2' rear overhangs need it, i don't know if sides do beyond the bumper flags

It looked great out on the pile!

[Bo Wallen]

Not a stupid question at all. Thanks for asking. Most of the transport is done on the road......when you come to a construction site things get a lil tricky. Some sites spend a bit of planning and grade a decent entry some don't. In this case i was a bit curious how well or not this setup could access different arias. I got stuck a few times....ugh ! The bumper on The front of The BO-Dog is a bit to low for off road. and just standard Tamiya axles and tires does work quite well. Next time you see this one, it will be equipped with Lesu axles and diff lock. New Motor and ESC is also needed. Flaggs and marking in general was missing....Running out of time as usual before a meet. When moving things on special permit things get a bit interesting an some normal rules goes out the windows. The extension-rod on the truck is retractable by a little motor under the frame, so i can pull normal trailers too. Hope this clear some of the questions.

[Bo Wallen]

Forgot to say i run a 4 channel radio in this truck. Need to change that to 7 channel at least for next show .

[skeeter]

:)
Yes i did. Was used for years in 1/10 buggy racing and the last five years in the Globe. Wondering if i should change motor also......5 years in the Globe it felt weak the last day........:D

As the mechanics at my place of work, run er till she pukes. Then we know what's brok, & NEEDS worked on.

[Bo Wallen]

:)


As the mechanics at my place of work, run er till she pukes. Then we know what's brok, & NEEDS worked on.

Pretty much what i did to this Globe. Interesting to find out how things functioning or not over time.
The more you care when you build the truck the longer it last.
However there is a problem with quality of casting plastic parts. For some reason the same part from different kits, one can fall apart and the other is strong and good. On the other side i don't think Tamiya could imagine what we do to our trucks when they started this back in the day.

[Bo Wallen]

Today is freezing cold outside......14 F I'm not going outside today :D
72 F in the shop. Tamuder Special Deluxe work all day long:)

https://farm5.staticflickr.com/4753/39761360391_74e0d877a1_b.jpg (https://flic.kr/p/23zznbp)IMG_2146 (https://flic.kr/p/23zznbp) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[skeeter]

That Bruder Mack looks great as a flatbed truck!

[Bo Wallen]

That Bruder Mack looks great as a flatbed truck!

Thanks Skeeter.

Shop Truck Numero uno. Lot of errands i can run for the big guys :D Now back to GetErDone.

[Bo Wallen]

Hard at work....Robin Chief Thinker at Cabin Fever Expo.

https://farm5.staticflickr.com/4625/28048586719_bb3078dfb6_b.jpg (https://flic.kr/p/JJykCK)27042624_1204016746397765_840244897_n (https://flic.kr/p/JJykCK) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

:D

[Lil Giants]

A smooth 12v brushed esc I've been using in my tam trks is Mtronics Viper Marine 15A... I can't recall if I ever had one fail :thinking:

[Bo Wallen]

A smooth 12v brushed esc I've been using in my tam trks is Mtronics Viper Marine 15A... I can't recall if I ever had one fail :thinking:

Hey Joe.
After inspection of the Globe. I found out several problems.
1. Four days before Cabin Fever i purchased a brand new 4 Ch Spektrum Receiver to get one more funktion for the Rod/drawbar to retract when i pull regular trailers. That stopped working in reverse.
2. The ESC witch is a Novak Super Rooster had a cracked solder.
So now it is fixed, solder the board in the ESC and one new receiver. No cost just i tiny bit of work...........Life is good ! Back to the Tamuder and finish that one. :bounce:

[Hostile]

Brilliant work bo. Loving seeing the set ups. Amazing an esc can last so long!

[Bo Wallen]

Thanks Hostile :)

It might not look like much happened..........Got everything to fit and work now. Toolboxes and a few other small details left to fix. Next time i take a photo of this one it's with paint job done :bounce:

https://farm5.staticflickr.com/4618/39869485502_f62d6e27d2_h.jpg (https://flic.kr/p/23K8x1s)IMG_2149 (https://flic.kr/p/23K8x1s) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Claus]

Short Beams need hauling too!:D

[Bo Wallen]

Short Beams need hauling too!:D

Yes Claus. :)

I provide Escort Service also..........Opsi !!! :D No load is to short or wide.....we do them all. This one is going to be busy....:cool: Very fun to drive. Turning radius less than 44 inches.

[frizzen]

I just ran across an idea for your *Really Heavy* hauls that should have a push-truck.

http://www.wheelsacademy.eu/rchobby/project/dummytruck/dummytruck.html

Except continue the steering / drawbar through an opening behind the pintle, so pintle pin is fulcrum so it looks and tracks more realistic
https://flic.kr/p/VGSYs7

[Bo Wallen]

I just ran across an idea for your *Really Heavy* hauls that should have a push-truck.

http://www.wheelsacademy.eu/rchobby/project/dummytruck/dummytruck.html

Except continue the steering / drawbar through an opening behind the pintle, so pintle pin is fulcrum so it looks and tracks more realistic
https://flic.kr/p/VGSYs7

Thanks for the idea Frizzen. I've been working on and off to make a fully funktional steering system. Three puller's one Beam/other load rig, and three pusher trucks. So far i'm close to happy with the puller trucks, tiny bit left to adjust. Hoping i can get some continuous time space to work on that project. Dropping 5 minutes here and 30 minutes there it's just to complicated and hard to remember where i left off. And while waiting for paint to dry o the shop truck i'm starting this one.......

https://farm5.staticflickr.com/4723/40049172131_0f177042d7_b.jpg (https://flic.kr/p/2421tzM)IMG_2161 (https://flic.kr/p/2421tzM) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm5.staticflickr.com/4656/28285590179_b5a77243b5_b.jpg (https://flic.kr/p/K6v3vi)IMG_2163 (https://flic.kr/p/K6v3vi) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

This one will be helpful in the fleet for sure. :D

[Northern Farmer]

Coming along nicely Bo :cool:

[skeeter]

Bo, what axles are you using for the powered steering axles? Do you have a link that you can post fir where you source them? I need to get one fir a build that I have upcoming in the not too distant future.

[Northern Farmer]

Bo, what axles are you using for the powered steering axles? Do you have a link that you can post fir where you source them? I need to get one fir a build that I have upcoming in the not too distant future.

http://www.rclesu.com/SC.html

http://www.wtbcar.com/shopping/index.php?route=product/category&path=20_53

[skeeter]

Thsank-you N farmer fir the links.

[Bo Wallen]

Moving forward tiny bit......Mock-up still in progress.....

https://farm5.staticflickr.com/4674/25237516047_9d75cb3e7f_b.jpg (https://flic.kr/p/Es9Sg2)IMG_2169 (https://flic.kr/p/Es9Sg2) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

No place for a Tamiya Gearbox........A smaller/better one is on it's way.....Other front rims and tires too :D

[Bo Wallen]

WooHoo the Winch Motors showed up today........:D

https://farm5.staticflickr.com/4652/40110595101_6677c75b10_b.jpg (https://flic.kr/p/247rhuv)IMG_2171 (https://flic.kr/p/247rhuv) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

!2v 40 RPM Strong as a Bull :eek:

[bigford]

Woo hoo bo-dog is building a excavator now!!

[Bo Wallen]

Woo hoo bo-dog is building a excavator now!!
Nope ;o) But i can pull a lot of stuff out of da HOLE.......:D

[Mikem]

Hehehehe

[skeeter]

That's a LOT of winch motor. Looks like the motors I've got in the Bruder D11 conversion, for the drive motors.

[bigford]

Exactly skeeter they look like my china kat drive motors
Too. Can't wait to see what kind of big dog you building bo-dog

[Cooper]

Looking forward to see this creation. :).

[Bo Wallen]

Hehehehe

That's a LOT of winch motor. Looks like the motors I've got in the Bruder D11 conversion, for the drive motors.

Exactly skeeter they look like my china kat drive motors
Too. Can't wait to see what kind of big dog you building bo-dog

Looking forward to see this creation. :).

Well Mikem this is a fun build for sure. Skeeter this is two of four.....two backordered as usual when i go shopping.....can't win that game. How do you like those motors ? Bigford Are you happy with the motors ? Well this Dog is going to be the Über Dog In the Kennel :D Cooper It's coming to a screen near you Soon. Keep Clapping and stay tuned. :lol:

[bigford]

The track motors ARE the only thing on the kat that
Haven't caused me trouble

[Bo Wallen]

The track motors ARE the only thing on the kat that
Haven't caused me trouble

Sounds like lil cat need a good Dr. It's sad when things aren't working like you was hoping. I'm sure it will do get fixed and happy play time will come around.
This motors needs attention.....the amount of grease in them are minimal....so i recommend put some more of that in before using them.

[skeeter]

Wowzers! 4 of the big donnagers, you'll be doing some serious winching with them.

IDK how well the motors work....yet. I have them bolted onto the Bruder D11 conversion. EVENTUALLY, I'll get that project off my project bench(ES) & get it working.

BIGFORD I'm GLAD to hear that they are trouble free motors.

BO, THANKS fir the tip. I hadn't thought to open them to look. I definitely will be checking them, BEFORE placing the machine into service!

[9W Monighan]

Interesting truck indeed.
Can you lay a rule or caliper on those right angle motors? I've been hunting
for a pair but they cant be any more than 40mm wide when placed back to back to fit down into my little project I was foolin with.

[Bo Wallen]

Opsi.....Opsi Didn't tell you all of it....Did i ?:D

https://farm5.staticflickr.com/4653/40091308512_596b0c6c22_b.jpg (https://flic.kr/p/245Jrg7)IMG_2174 (https://flic.kr/p/245Jrg7) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Two winches forward. Two Backwards. and two awkward....:lol:

P.S. Steve /9W Monighan i will do that pronto :)

[Bo Wallen]

Steve here is two shot's hope it's good enough.

https://farm5.staticflickr.com/4607/25252323937_792d8b1d9d_b.jpg (https://flic.kr/p/EtsL8t)IMG_2175 (https://flic.kr/p/EtsL8t) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm5.staticflickr.com/4668/25252324657_93bf0bbb12_b.jpg (https://flic.kr/p/EtsLkT)IMG_2176 (https://flic.kr/p/EtsLkT) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

The shaft protrude 17mm and is 6 mm d shaft

[9W Monighan]

Looks like motor is out some from the back of case making them not touch each other. Whats the link to get some of these?

[Bo Wallen]

Looks like motor is out some from the back of case making them not touch each other. Whats the link to get some of these?

https://www.robotshop.com/en/6vdc-40rpm-1111oz-in-worm-gear-motor.html

They are out of stock right now. I got a mail stated back in stock February 15 2018 So there is hope for us.

[9W Monighan]

https://www.robotshop.com/en/6vdc-40rpm-1111oz-in-worm-gear-motor.html

They are out of stock right now. I got a mail stated back in stock February 15 2018 So there is hope for us.

Thanks Bo

[Bo Wallen]

Need Road Construction Machine for Beam Hauler Fleete. So i started one more project..........Could be Ford's first Grader who knows.

https://farm5.staticflickr.com/4792/25822552967_704766a0d7_b.jpg (https://flic.kr/p/FkRkmt)IMG_2286 (https://flic.kr/p/FkRkmt) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm5.staticflickr.com/4784/25822552007_d551be103e_b.jpg (https://flic.kr/p/FkRk4V)IMG_2284 (https://flic.kr/p/FkRk4V) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[ittigger]

Very nice. :)

[Lil Giants]

CTI actuators? Gear motor on each wheel?

[Bo Wallen]

Very nice. :)

CTI actuators? Gear motor on each wheel?

Thanks ittigger ;o)
Now that's a very good question........wish i had a good answer to give. I like the CTI actuators, so i'm trying them. i also looking if there could be a hydraulic alternative. Drive motors might go in the wheels.......i got to ask how you like the ones in your haul trucks. I'll make the front part of the frame in steel sheets for adding weight and strength....thinking i'll pop a line of battery cells inside.......not much room for things.

[Hostile]

Nice one Bo! Ive always loved graders. Not enough around!

[Lil Giants]

Don't need the power of hyds for this type of machine & the CTI's will save you so much space. Do they each require an esc to operate? Maybe the actuonix would simply things even more :thinking:

The brushed motors work great & only need one esc to run 4 motors. The rpm on 3s is about 110. The brushless ones each need an esc for each motor & travel 10-15% slower, more expensive too, a bit shorter in length.

[Bo Wallen]

Nice one Bo! Ive always loved graders. Not enough around!
Thanks Hostile.

Yes a grader is No 1 on my list for sure. a Ford might be outside the box......but i was outside the box all my life so i go with that........a different machine mathers too ;o)

[Bo Wallen]

Nice one Bo! Ive always loved graders. Not enough around!

Don't need the power of hyds for this type of machine & the CTI's will save you so much space. Do they each require an esc to operate? Maybe the actuonix would simply things even more :thinking:

The brushed motors work great & only need one esc to run 4 motors. The rpm on 3s is about 110. The brushless ones each need an esc for each motor & travel 10-15% slower, more expensive too, a bit shorter in length.

Thanks Joe.
Good ideas / advice right there. I need a lot of power and low speed when grading or push with front blade or ripper in the rear. Have to do some torque test, it's a bit of dozer power needed to the wheels. I had one idea that required the hood to be extended a bit in length. a two speed gearbox and chain drive between the wheels like the real ones. well back at it and we see.....

[Bo Wallen]

Getting the Globe in to a multi tool. Beam Haule/Push Pull truck.

https://farm1.staticflickr.com/789/27271128488_1bb3c23303_b.jpg (https://flic.kr/p/HxREou)IMG_2305 (https://flic.kr/p/HxREou) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm1.staticflickr.com/785/26272942667_2a55652cda_b.jpg (https://flic.kr/p/G2DGw8)IMG_2306 (https://flic.kr/p/G2DGw8) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm1.staticflickr.com/894/26272942227_8c4bb49f88_b.jpg (https://flic.kr/p/G2DGox)IMG_2303 (https://flic.kr/p/G2DGox) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm1.staticflickr.com/787/39335625120_0858185879_b.jpg (https://flic.kr/p/22VXmV7)IMG_2476 (https://flic.kr/p/22VXmV7) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm1.staticflickr.com/892/40249456675_7899ae5896_b.jpg (https://flic.kr/p/24jGZcz)IMG_2475 (https://flic.kr/p/24jGZcz) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm1.staticflickr.com/817/39335625540_4d634430bc_b.jpg (https://flic.kr/p/22VXn3m)IMG_2474 (https://flic.kr/p/22VXn3m) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Near ready for paint and Bling stuff.

[egronvold]

Be aware, making "multi-trucks" might lead to the need to downsize the overall fleet ;)

[Bo Wallen]

Be aware, making "multi-trucks" might lead to the need to downsize the overall fleet ;)

Ops ! did not think of that............:lol: Must find a solution of that............:D

Did you try the frame rails yet ???

[Mikem]

When would anyone have to many trucks ? Baffling

[egronvold]

Ops ! did not think of that............:lol: Must find a solution of that............:D

Did you try the frame rails yet ???

No, been to the US once more since we met. No time for hobbies for awhile.

[Bo Wallen]

Dolly Making for the Screener Plant.

https://farm1.staticflickr.com/952/42049333081_34dbc86d8b_k.jpg (https://flic.kr/p/274KPKp)IMG_2563 (https://flic.kr/p/274KPKp) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm1.staticflickr.com/957/42049333301_f7e37df96c_k.jpg (https://flic.kr/p/274KPPc)IMG_2564 (https://flic.kr/p/274KPPc) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm1.staticflickr.com/969/42049333541_567ddaa5f2_k.jpg (https://flic.kr/p/274KPTk)IMG_2565 (https://flic.kr/p/274KPTk) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm1.staticflickr.com/824/42049333831_7f88f6fc8a_k.jpg (https://flic.kr/p/274KPYk)IMG_2566 (https://flic.kr/p/274KPYk) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm1.staticflickr.com/947/42049334161_c3f683ab3d_k.jpg (https://flic.kr/p/274KQ52)IMG_2567 (https://flic.kr/p/274KQ52) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm1.staticflickr.com/981/42049334421_6b74a2c9ca_k.jpg (https://flic.kr/p/274KQ9v)IMG_2568 (https://flic.kr/p/274KQ9v) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Next will be paint and continue with the screener build.

[skeeter]

Nice project idea you have going on!

[Bo Wallen]

Thank you Skeeter ;o)

https://farm1.staticflickr.com/902/40613539620_66fbeef96d_b.jpg (https://flic.kr/p/24ST1nJ)IMG_2581 (https://flic.kr/p/24ST1nJ) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

The Man is Ready for Duty. and eight new truck rails ready for drilling holes....

https://farm1.staticflickr.com/886/42421455741_05a5df86b6_h.jpg (https://flic.kr/p/27CD3Rk)IMG_2580 (https://flic.kr/p/27CD3Rk) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Bo Wallen]

Getin' some better order in da shop ;o)

https://farm2.staticflickr.com/1726/42373150552_cc90e7da9e_h.jpg (https://flic.kr/p/27yntpf)IMG_2583 (https://flic.kr/p/27yntpf) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

And who is driving The Shop Truck tonight :D

https://farm2.staticflickr.com/1754/40615180750_140bc841a3_h.jpg (https://flic.kr/p/24T2qe5)IMG_2585 (https://flic.kr/p/24T2qe5) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm2.staticflickr.com/1727/40615181650_6975846882_h.jpg (https://flic.kr/p/24T2quA)IMG_2586 (https://flic.kr/p/24T2quA) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Bo Wallen]

After 6 months waiting a box fro RC4WD showed up. Was shipped from China 05-23 and came today 05-29 By DHL. Pretty fast i will say :)

https://farm2.staticflickr.com/1752/41716291914_551a2a1457_h.jpg (https://flic.kr/p/26yjUdj)IMG_2588 (https://flic.kr/p/26yjUdj) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Thank You RC4WD

[Bo Wallen]

Box Opens.........

https://farm2.staticflickr.com/1735/41716292454_568fae61e9_h.jpg (https://flic.kr/p/26yjUnC)IMG_2589 (https://flic.kr/p/26yjUnC) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Pile :D

https://farm1.staticflickr.com/890/41716295024_80752190c0_h.jpg (https://flic.kr/p/26yjV8W)IMG_2592 (https://flic.kr/p/26yjV8W) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Zabco]

No wonder I can't find any tires! Bo has cornered the market.

[kerst]

wow, that is a lot of tires!

Kerst

[Bo Wallen]

No wonder I can't find any tires! Bo has cornered the market.

wow, that is a lot of tires!

Kerst

Zabco. I'm Sorry.............NOT !!! Have ben waiting six mont on this delivery of 40 pair Lo-Pro.......and that suck ! :mad:

Kerst I'm starting to get there.......still more in the pipeline....80 tires is not enough :lol:

So thanks for checking in here in the mad professors dungeon ;o)

[frizzen]

So it took them 6 months to make enough tires for you to open a 1/14 scale tire store?

[Bo Wallen]

So it took them 6 months to make enough tires for you to open a 1/14 scale tire store?

Frizzen That's funny......:lol: No i think there is a bigger demand for Lo-Pro's than RC4WD can handle...........or they cheap out.......But i've got 100 of them and counting. Now i'm looking for 200 smaller cool looking wheels for the Mega Mover.....More on that later. Good Night :D

[Bo Wallen]

Todays box arrived.......Bird-nest......

https://farm2.staticflickr.com/1744/27606048917_88d2711e33_h.jpg (https://flic.kr/p/J4sdyD)IMG_2593 (https://flic.kr/p/J4sdyD) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

All of that ....to get this....:eek:

https://farm2.staticflickr.com/1730/27606049567_18b6256177_h.jpg (https://flic.kr/p/J4sdKR)IMG_2594 (https://flic.kr/p/J4sdKR) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Well back to doing.

[Hostile]

Wow thats awesome bo!

[skeeter]

Bo, the battery holders, will they be offered for sale?

[Bo Wallen]

Wow thats awesome bo!

Bo, the battery holders, will they be offered for sale?

Thanks Hostile :)

Skeeter Yes how manny do you need ?

Let's look at the shine...............

https://farm2.staticflickr.com/1723/27666822847_4059985a54_h.jpg (https://flic.kr/p/J9PGx2)IMG_2596 (https://flic.kr/p/J9PGx2) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

This gadget came, so i can get more stuff up and running :cool:

https://farm2.staticflickr.com/1750/41814588024_ac3301a849_h.jpg (https://flic.kr/p/26H1GdQ)IMG_2599 (https://flic.kr/p/26H1GdQ) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[frizzen]

Wow. So that's what a clean workbench looks like? It's...beautiful.

On your spare trees, does it have most of the 5th wheel parts?

[Bo Wallen]

Wow. So that's what a clean workbench looks like? It's...beautiful.

On your spare trees, does it have most of the 5th wheel parts?

Thanks Frizzen. If not on the tree, there is in the fifth wheel box ;o)

Tonight's mission : Doin' Led Lighting so freakin' bright so i'm gonna need welders shield.......or what they ar called.......


https://farm2.staticflickr.com/1727/42521735792_97e692c8b4_b.jpg (https://flic.kr/p/27Mv1BJ)IMG_2602 (https://flic.kr/p/27Mv1BJ) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Bo Wallen]

The Strip :D

https://farm2.staticflickr.com/1748/42595313441_414e19dfbd_h.jpg (https://flic.kr/p/27U17FT)IMG_2609 (https://flic.kr/p/27U17FT) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Zabco]

Holy cow! Look at all the tires! Don't know what your plan for all of them is but I bet its going to be awesome! And 'strip' is right. Your new workbench looks long enough to serve as a runway. I'm jealous.

[Bo Wallen]

Thanks, Zabco :)

The first coat is the deepest.....Rollin' Rollin' down the runway.....:lol:

https://farm2.staticflickr.com/1745/42555321842_5a64404476_b.jpg (https://flic.kr/p/27Qt9zy)IMG_2610 (https://flic.kr/p/27Qt9zy) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Bo Wallen]

Landed Safe :D

https://farm2.staticflickr.com/1745/27739138767_5a1fff81e7_h.jpg (https://flic.kr/p/Jgdkxe)IMG_2613 (https://flic.kr/p/Jgdkxe) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[egronvold]

Looking forward to the coming builds :)

[Bo Wallen]

Looking forward to the coming builds :)

Thank You Emil.

Yes the Runway is done..........Time to put things in order....and start Building some fun R/C Stuff :D

https://farm2.staticflickr.com/1747/41908699664_886f0cc3ab_b.jpg (https://flic.kr/p/26Rk3kj)IMG_2614 (https://flic.kr/p/26Rk3kj) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Shiny as a Dimond in the ............

[Bo Wallen]

Easing in to the new/upgraded Work Bench...........A cool experience with clean and organized workspace.....i can find things and tools.....:D

Baby steps now......:cop:

https://farm2.staticflickr.com/1731/41985920734_d11dc94973_h.jpg (https://flic.kr/p/26Y9Pt5)IMG_2628 (https://flic.kr/p/26Y9Pt5) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Hmmm coffee time :lol:

[Bo Wallen]

A new day and more therapeutic work ahead. Preparing for Cabin Fever 2019

https://farm2.staticflickr.com/1826/41093888110_0555e0e3a7_b.jpg (https://flic.kr/p/25BjVff)IMG_2649 (https://flic.kr/p/25BjVff) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm2.staticflickr.com/1764/28035462897_6169c8c517_b.jpg (https://flic.kr/p/JHp5nX)IMG_2650 (https://flic.kr/p/JHp5nX) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm2.staticflickr.com/1802/42904178051_eddbc91b73_b.jpg (https://flic.kr/p/28ni8nM)IMG_2651 (https://flic.kr/p/28ni8nM) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Trucking4u]

Haha Bo!

I love watching your builds.... I saw the real life version of your KH Bo Dog today!!!!
I could not get a picture of it, it was flying by on the interstate.

Finally, I am not the only one talking about Cabin Fever 2019 :lol:

Keep up the great work!!! :D

Jon In Vt.
The Northern Rednecker

[Bo Wallen]

Haha Bo!

I love watching your builds.... I saw the real life version of your KH Bo Dog today!!!!
I could not get a picture of it, it was flying by on the interstate.

Finally, I am not the only one talking about Cabin Fever 2019 :lol:

Keep up the great work!!! :D

Jon In Vt.
The Northern Rednecker
Thank You Jon. Cool wasn't sure they existed in the real world. Have to catch one some day.
Well it's a lot to watch for in the future.....need to get this buggers up and running.
https://farm2.staticflickr.com/1783/41099544620_70b0f9803d_b.jpg (https://flic.kr/p/25BPUJh)IMG_2652 (https://flic.kr/p/25BPUJh) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr
And a buttload of trailers/Bo-Dog's

[Hostile]

Wow Bo! You truely are a madman! In the best kind of way!

[Bo Wallen]

Wow Bo! You truely are a madman! In the best kind of way!

Thanks Hostile ;o) Mad Max Jr. lol

https://farm2.staticflickr.com/1805/28040828287_efa3c0a3c1_b.jpg (https://flic.kr/p/JHSzjF)IMG_2653 (https://flic.kr/p/JHSzjF) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Bo Wallen]

Preparing for..........:D

https://farm2.staticflickr.com/1837/28099619937_2f625f5ef5_b.jpg (https://flic.kr/p/JP4U2P)IMG_2663 (https://flic.kr/p/JP4U2P) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Should work I think ;o) just ad ATA Carnet and off we go.

[Bo Wallen]

Postman is here again :D

https://farm2.staticflickr.com/1769/42976594211_66b26e8dce_b.jpg (https://flic.kr/p/28tGhbg)IMG_2665 (https://flic.kr/p/28tGhbg) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[TRUCKMAKER]

2 speed transfer cases or just front axle disconnect? Who’s the manufacturer?

[Bo Wallen]

2 speed transfer cases or just front axle disconnect? Who’s the manufacturer?

Front axle disconnect From Lesu it is.

[Trucking4u]

Preparing for..........:D

https://farm2.staticflickr.com/1837/28099619937_2f625f5ef5_b.jpg (https://flic.kr/p/JP4U2P)IMG_2663 (https://flic.kr/p/JP4U2P) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Should work I think ;o) just ad ATA Carnet and off we go.



Oooooooo ooooooo, can I guess? Please?!?!

It must be for Cabin Fever!

I was just thinking of that event today, and how I cannot wait to attend for the first time.
Also, nice transfer cases.

Jon in Vt.
The Northern Rednecker

[Bo Wallen]

Oooooooo ooooooo, can I guess? Please?!?!

It must be for Cabin Fever!

I was just thinking of that event today, and how I cannot wait to attend for the first time.
Also, nice transfer cases.

Jon in Vt.
The Northern Rednecker

Close but no cigar this time. You are on the right track sort of, Yes I'm going to CF, next year but first, I go here: https://www.ukrctruckersnationalgathering.co.uk/
Right now there are 175 paying drivers! The organizers think it will be 200 :jaw: Bo-Dog & the Beam Hauler on tour. :D

[Trucking4u]

Close but no cigar this time. You are on the right track sort of, Yes I'm going to CF, next year but first, I go here: https://www.ukrctruckersnationalgathering.co.uk/
Right now there are 175 paying drivers! The organizers think it will be 200 :jaw: Bo-Dog & the Beam Hauler on tour. :D


Haha! Close but no cigar! Still looking like a lot of fun!!! Take a few pictures for those who cannot attend it!


Jon in Vt.
The Northern Rednecker

[Bo Wallen]

A good evening in da shop :D Production in high gear. :)

https://farm1.staticflickr.com/833/28209765717_f6ba9d53be_b.jpg (https://flic.kr/p/JYNqwZ)IMG_2673 (https://flic.kr/p/JYNqwZ) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm2.staticflickr.com/1782/28209766297_7ab7a71de8_b.jpg (https://flic.kr/p/JYNqGZ)IMG_2672 (https://flic.kr/p/JYNqGZ) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Abit more done, need to rest the fingers and get next batch done. :cool:

[Bo Wallen]

And now this!

https://farm1.staticflickr.com/920/28396251097_ed8a87cedd_b.jpg (https://flic.kr/p/Kghd9a)IMG_2705 (https://flic.kr/p/Kghd9a) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Dog-Factory.

[egronvold]

Do you have enough beams? ;)

[Bo Wallen]

Do you have enough beams? ;)

Yes, Emil, I do. :lol: How is the frame rail? Did you try it yet?

[Bo Wallen]

Build and assembly. https://farm2.staticflickr.com/1802/42385171915_f104db6bc3_b.jpg (https://flic.kr/p/27zr5W8)IMG_2709-1 (https://flic.kr/p/27zr5W8) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Four Dog in the making.

[Bo Wallen]

Dog's done. Time for paint and assembly.

https://farm2.staticflickr.com/1767/28458100167_d31c294a35_b.jpg (https://flic.kr/p/KmKcHr)IMG_2711 (https://flic.kr/p/KmKcHr) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Caus there is more of that outside the picture...................:D

[Bo Wallen]

Time for paint.

https://farm1.staticflickr.com/843/43346356771_1235164332_b.jpg (https://flic.kr/p/293npGP)IMG_2712 (https://flic.kr/p/293npGP) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Bo Wallen]

Primer day Paint evening.

https://farm2.staticflickr.com/1805/41562732720_765c7bf29e_h.jpg (https://flic.kr/p/26jKSq1)IMG_2714 (https://flic.kr/p/26jKSq1) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Bo Wallen]

So it's started. Bo-Dog & the Beam Hauler Tour.

https://farm2.staticflickr.com/1787/41671215560_29420135ef_b.jpg (https://flic.kr/p/26ukSzN)37392893_1877351555651760_1089818732697485 312_n (https://flic.kr/p/26ukSzN) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Going here.

https://farm1.staticflickr.com/918/41671213710_ea60f6c3bd_z.jpg (https://flic.kr/p/26ukS2U)36861966_10215817243645596_293813052381960 6016_n (https://flic.kr/p/26ukS2U) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

To do This.

https://farm2.staticflickr.com/1790/41671214570_31f125a99a_b.jpg (https://flic.kr/p/26ukShJ)19222812_10154977447418411_450616841427178 6304_o (https://flic.kr/p/26ukShJ) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Hope there will be a ton of pictures to look at soon. On a screen near you. :D

And remember you saw it here first. :cool:

[Bo Wallen]

I'm here now :D 15 hour from door to door.......not bad at all. More of this later, bedtime 1:40 pm here. Gnite

[frizzen]

That sounds awesome!

Can't wait to start seeing pics & video!

----

I hope ya can get someone to help run some pilot cars! A guy swinging that much beam through their streets could do some damage with them all driving on the wrong side of it.

[skeeter]

I LOVE that pic of the layout! I wish we had BIG events like that here in the states.

[kerst]

Wow, one needs a GPS there!

Kerst

[Rvjimd]

You will need to carry an extra "tank of fuel" just to get around that place one time!:eek:

[Bo Wallen]

The UK National Gathering 2018 is done. Epic Event is an understatement!!!

KH Beam Hauler got UK service before entering British roads.

https://farm1.staticflickr.com/847/29706897578_3e298bc459_b.jpg (https://flic.kr/p/Mg6BFh)37592417_10214118086039857_5161857417645916 160_o (https://flic.kr/p/Mg6BFh) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Ready Go!

https://farm1.staticflickr.com/845/29706897218_9c74a0327e_b.jpg (https://flic.kr/p/Mg6Bz5)37613678_10214118099200186_1260493036459130 880_o (https://flic.kr/p/Mg6Bz5) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Great push from the absolute amazing ALE. Truck. Master Builder Raymond Harrison got it uphill with a glance.

https://farm1.staticflickr.com/929/42672650935_8bd3bef362_b.jpg (https://flic.kr/p/281QuqX)37656551_926286387559619_40667408127240437 76_n (https://flic.kr/p/281QuqX) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm2.staticflickr.com/1785/43577801921_1a038b0f4a_b.jpg (https://flic.kr/p/29oPChr)37604920_926286327559625_17663476144978001 92_n (https://flic.kr/p/29oPChr) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Special Beam Hauler Parking Lot

https://farm2.staticflickr.com/1764/41769985380_1c867e5007_b.jpg (https://flic.kr/p/26D56pJ)37488138_1882729901780592_4542139184961290 24_n (https://flic.kr/p/26D56pJ) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

There is more to come.

[Bo Wallen]

On the road again.

https://farm1.staticflickr.com/834/41769615450_f86ba470f7_b.jpg (https://flic.kr/p/26D3crC)37574478_1351187028348052_6412816228003348 48_o (https://flic.kr/p/26D3crC) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm2.staticflickr.com/1824/29706903518_7e86fd60c3_b.jpg (https://flic.kr/p/Mg6DrG)37661392_1352509878215767_68422972809727180 8_o (https://flic.kr/p/Mg6DrG) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr


BUSTED!!!:lol:

https://farm2.staticflickr.com/1781/42673408785_4db47f7b55_b.jpg (https://flic.kr/p/281UnHk)37582424_1047217605443390_4042846917518950 40_o (https://flic.kr/p/281UnHk) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Bo Wallen]

The TopGuns of Make it happen !!!

https://farm2.staticflickr.com/1807/29706896188_512c01bd3f_b.jpg (https://flic.kr/p/Mg6Bgj)37646426_10215918638980416_1435004743175897 088_n (https://flic.kr/p/Mg6Bgj) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Fantastic People and now good friends. :)

[Bo Wallen]

https://www.youtube.com/watch?v=uL7xg-TJHbM

[Bo Wallen]

Student Driver on the loose in the UK.https://www.youtube.com/watch?v=4UMChjeVee4&feature=youtu.be

[frizzen]

Great pics, that's a heck of a show they put on!

What'd ya do to get the truck booted over there? (Makes a note to take a Bruder person with chopsaw...)

[Hostile]

Thats awesome Bo! Crazy manuverability on that thing. I love it! Am envious you got to go to such an awesome show!

[Bo Wallen]

Great pics, that's a heck of a show they put on!

What'd ya do to get the truck booted over there? (Makes a note to take a Bruder person with chopsaw...)

Thats awesome Bo! Crazy manuverability on that thing. I love it! Am envious you got to go to such an awesome show!

Thank You Frizzen and Hostile.
Yes, a super cool event for sure. I put my stuff in the suitcase and flew over there. And Please join me next year for the UK. Nationals It's sooooooo fun.https://farm1.staticflickr.com/862/41994638940_3696390883_b.jpg (https://flic.kr/p/26YVv5Y)BeamerMafia (https://flic.kr/p/26YVv5Y) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Beam Hauler friend in the UK.

[Bo Wallen]

Cruising The UK Nationals Gathering, and every inch of it.

https://farm1.staticflickr.com/850/42997550635_1a36cc8652_b.jpg (https://flic.kr/p/28vxFMV)IMG_2746 (https://flic.kr/p/28vxFMV) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Her is Yard testing, does it fit?

The elevated roundabout was a fun thing an very well designed piece of work.

https://farm1.staticflickr.com/849/42997550945_23f0d974ac_b.jpg (https://flic.kr/p/28vxFTg)IMG_2750 (https://flic.kr/p/28vxFTg) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Did manage to go around many times, and also did it in reverse a few times.

[Bo Wallen]

The UK Nationals big parking lot.

https://farm1.staticflickr.com/933/43109531235_ccbfe5f08a_b.jpg (https://flic.kr/p/28FrBHV)37675281_10156429022669361_135426099868860 416_o (https://flic.kr/p/28FrBHV) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Parking spot to short! No problem just bend it around the building. :D

https://farm2.staticflickr.com/1796/43109532945_8400310ab7_b.jpg (https://flic.kr/p/28FrCep)37696311_10156429025934361_549185676306808 8320_o (https://flic.kr/p/28FrCep) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

And off we go. a lot of miles ahead.

[Bo Wallen]

Driving in the UK. No problem.:lol:

https://farm2.staticflickr.com/1833/44017281541_33865fde05_b.jpg (https://flic.kr/p/2a4E5gg)38392007_1905445046175744_1524429686015262 720_n (https://flic.kr/p/2a4E5gg) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Bo Wallen]

Scania Dealership at the UK Nationals.

https://farm2.staticflickr.com/1832/30161696838_d949429b09_b.jpg (https://flic.kr/p/MXhzDQ)43526209412_eaa2dd06a4_o (https://flic.kr/p/MXhzDQ) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr


Twist and turns.

https://farm2.staticflickr.com/1811/30161694768_bc5a6585bc_b.jpg (https://flic.kr/p/MXhz39)42667615105_c9a1ffc3ea_o (https://flic.kr/p/MXhz39) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr
https://farm2.staticflickr.com/1813/30161698048_d49423c965_b.jpg (https://flic.kr/p/MXhA1G)42667612105_034c870a67_o (https://flic.kr/p/MXhA1G) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[TRUCKMAKER]

Looking good Bo!

[Zabco]

Any video of you going backwards through that overhead roundabout?

[Bo Wallen]

Looking good Bo!

Any video of you going backwards through that overhead roundabout?

Thank you, Guys. There were two cameras around one time, not sure who the guys were, I did that maneuver a few times :eek: haven't seen any vids, yet. Might surface at some point. I did a fair amount of Yard/ Trespassing visits also, I know someone has a few minutes of that also.
I wanna see those too, I was to busy driving as usual :D 12.5 hours in a day and a half
So guys if you come across videos and pictures, please let me know.

[Hostile]

I wish i could take my truck along! At some point ill be there with my wife but thatll be sorting out the uk house for tenancy. Too much of a headache to pack the truck and bring it along lol

[Bo Wallen]

I wish I could take my truck along! At some point, ill be there with my wife but that'll be sorting out the UK house for tenancy. Too much of a headache to pack the truck and bring it along lol

If you come next year I'll have a truck ready for you to cruise around the layout.
This year o brought 3 trucks and six trailers/Bo-Dog's.........I manage to run one rig. :eek: for 12.5 hours in two days.

[frizzen]

When did you build a Mini convertible? The driver in it looks so realistic!

That Scania lot is killer, and the overpasses look fun

With that much driving, i hope they don't pull you over and check your logbook

[Bo Wallen]

When did you build a Mini convertible? Just printed one. :D The driver in it looks so realistic! That's a scary dude.:lol:

That Scania lot is killer, Much $$$ in that yard. and the overpasses look fun Superfun in reverse.:cool:

With that much driving, i hope they don't pull you over and check your logbook
Logbook out the window :eek:


Fun in The UK :bounce:

[Bo Wallen]

Cruising at the UK Nationals

https://farm2.staticflickr.com/1817/43208258355_d2d5bc32db_b.jpg (https://flic.kr/p/28QaBRD)EWP_0230 (https://flic.kr/p/28QaBRD) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Bo Wallen]

This is the best picture so far from England. I'm still looking for more pictures.

https://farm2.staticflickr.com/1836/44180222592_5d153bc13b_b.jpg (https://flic.kr/p/2aj4bXJ)38827707_10216661849639204_327883120546152 4480_o (https://flic.kr/p/2aj4bXJ) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Bo Wallen]

Here is a link to some cool photos.https://endersbyweddingphotography.shootproof.com/gallery/RCNATIONALS/home

[Bo Wallen]

Friday evening. Transform this old flatbed into something useful for the Beam Hauler Fleete.

https://farm2.staticflickr.com/1878/29457122707_63ec91cb3a_b.jpg (https://flic.kr/p/LT2siZ)IMG_3254 (https://flic.kr/p/LT2siZ) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Hopefully, I can work on this all weekend. Paint Monday, assemble Tuesday......Might be optimistic, but it's a goal anyway. :D

[Bo Wallen]

Got busted more than one time......:cop: https://farm2.staticflickr.com/1878/44458835051_e35f7ee7c3_b.jpg (https://flic.kr/p/2aJF9JP)37643992_1047364565428694_7598938594312454 144_o (https://flic.kr/p/2aJF9JP) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm2.staticflickr.com/1881/42650143210_a01f3f1cf8_b.jpg (https://flic.kr/p/27YR8EJ)37647952_1047364468762037_9112965616133734 40_o (https://flic.kr/p/27YR8EJ) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Bo Wallen]

One mor picture from the Nationals.

https://farm2.staticflickr.com/1878/30625187588_5eedd85f44_b.jpg (https://flic.kr/p/NEf6iE)37639002_1353150694818352_80166096296791244 80_o (https://flic.kr/p/NEf6iE) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on FlickrOne mor

[skeeter]

Nice pics!

[Bo Wallen]

Thank You Skeeter.
Today is Mounting Tires on to rims day.

https://farm2.staticflickr.com/1855/44555034411_252432c9b0_b.jpg (https://flic.kr/p/2aTbcst)IMG_3255 (https://flic.kr/p/2aTbcst) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

This trailer is now in the paint shop. :D

https://farm2.staticflickr.com/1857/43676944184_ac0064068a_b.jpg (https://flic.kr/p/29xzKPN)IMG_3254 (https://flic.kr/p/29xzKPN) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Final assembly Next week, and start next build. A Truck :eek:

[Bo Wallen]

Today I got two Boxes delivered from the same vendor in Japan. :D
The small box was shipped August 27. 22 days ride. The big box vas shipped September 3rd. 15 days ride.
The big box is the winner :cop:

https://farm2.staticflickr.com/1854/42930449490_6b6b269068_b.jpg (https://flic.kr/p/28pBLXC)IMG_3261 (https://flic.kr/p/28pBLXC) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

And I guess you might know what's inside the boxes. :lol:

The reason there are two boxes from the same vendor: They don't put what they have in stock, just some low number on e-bay. I like to buy in Bulk. :lol:

[Bo Wallen]

Opsi Ops :D

https://farm2.staticflickr.com/1862/42930450110_8b02bd05d6_b.jpg (https://flic.kr/p/28pBM9j)IMG_3262 (https://flic.kr/p/28pBM9j) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Bo Wallen]

Last night..... couldn't sleep. So down to shop and make something up.
Result.

https://farm2.staticflickr.com/1857/42955370550_1952c820a0_b.jpg (https://flic.kr/p/28rPv85)IMG_3266 (https://flic.kr/p/28rPv85) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Is this approved securement? Please let me know your Verdict, please.:cop:

[Zabco]

Depends on what you are trying to secure and to what are you trying to secure it to. FMCSA 49CFR393.

[skeeter]

It all depends on that shackle, as well as the binder rating. Are they made in the U.S.A.? If so, they will be stamped clearly for their working load rating.

[Bo Wallen]

Depends on what you are trying to secure and to what are you trying to secure it to. FMCSA 49CFR393.

It all depends on that shackle, as well as the binder rating. Are they made in the U.S.A.? If so, they will be stamped clearly for their working load rating.

Oh Lord, I have to go for Exemptions........My goal was to be able to get the load easy and safe secured, and kind of look scale. also when traveling to different shows, don't have to spend too much time assembly all the stuff.:cop:
However, I got pulled over a few times in the UK. so I take it seriously.
Thanks for the input Zabco, Skeeter.

[Zabco]

Components used for securing loads do NOT have to be marked with their working load limits as do components used for hoisting/lifting loads (completely different set of regulations). However if not marked, there are tables in the FMCSA load securement rules that give maximum allowable loading based on size and type of material. Rules also give guidance based on type and size of load and type of vehicle it is being carried on what is required in type, number and positioning of tie-downs. If you are a bit familiar with what is required in the real world and know what real world size of components are then it isn't too hard to come up with scaled components that look correct. In truth, if your sample tie down link is for what I think you are trying to do it will probably scale up to much larger than needed in real world.

[frizzen]

Heh, i hope Skeeter and Zabco don't build police interceptors so they can go looking for violations at shows. Then after that someone'll make an OSHA figure or Mine Safety guy...

Do the truck enforcement guys over there in the UK use station wagons to haul the extra truck checking equipment, or were they running normal cop cars to harass you?

(Bring donuts, the guy with a cop car will want to eat them and will drive less to avoid getting donut glaze on the remote)

As someone not involved in trucking or hauling, I might try to put a side handle on the turnbuckle so it looks more like a ratcheting load binder.

[Bo Wallen]

Well, the first batch is done. Now over to test and classification. https://farm2.staticflickr.com/1886/43882473435_b550205433_b.jpg (https://flic.kr/p/29RK9vz)IMG_3267 (https://flic.kr/p/29RK9vz) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Let's hope it works. :cop:

[Bo Wallen]

Components used for securing loads do NOT have to be marked with their working load limits as do components used for hoisting/lifting loads (completely different set of regulations). However if not marked, there are tables in the FMCSA load securement rules that give maximum allowable loading based on size and type of material. Rules also give guidance based on type and size of load and type of vehicle it is being carried on what is required in type, number and positioning of tie-downs. If you are a bit familiar with what is required in the real world and know what real world size of components are then it isn't too hard to come up with scaled components that look correct. In truth, if your sample tie down link is for what I think you are trying to do it will probably scale up to much larger than needed in real world.

Heh, i hope Skeeter and Zabco don't build police interceptors so they can go looking for violations at shows. Then after that someone'll make an OSHA figure or Mine Safety guy...

Do the truck enforcement guys over there in the UK use station wagons to haul the extra truck checking equipment, or were they running normal cop cars to harass you?

(Bring donuts, the guy with a cop car will want to eat them and will drive less to avoid getting donut glaze on the remote)

As someone not involved in trucking or hauling, I might try to put aside handle on the turnbuckle so it looks more like a ratcheting load binder.

Yes, I did heavy haul in Europe for thirty years, so I know what's needed over there. I also over secured all my loads for a piece of mind. Never had a law enforcement person complain. However, it's hard to find the scale stuff that looks and works well. And yes a handle is coming for the turnbuckle, just need to make some decent ones. Thank You Guys for the input, It.s fun to have guys that take their time to interact.

[Bo Wallen]

A measurement insight.

https://farm2.staticflickr.com/1861/29856982547_b12d220907_b.jpg (https://flic.kr/p/MumQHa)IMG_3268 (https://flic.kr/p/MumQHa) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm2.staticflickr.com/1868/29856981757_00672e3a01_b.jpg (https://flic.kr/p/MumQtx)IMG_3269 (https://flic.kr/p/MumQtx) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Bo Wallen]

Variations in securing loads.

https://farm2.staticflickr.com/1881/44746333682_e99f190226_b.jpg (https://flic.kr/p/2bb5E4L)IMG_3271 (https://flic.kr/p/2bb5E4L) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Zabco]

However, it's hard to find the scale stuff that looks and works well.

Thats the big problem. Even as big as 1/14 scale seems, truly scaled down items are tiny and hard to handle. I use chain for tiedowns that has links 1mm in diameter. That scales to over 1/2 inch diameter in the real world. Unless you are trying to tie down something really massive most guys are going to use 3/8" chain. Simply too small to use at scale size if you could even find it.

Looks like your turnbuckles are using 3mm screws? Close to 1 3/4 inch in real world, pretty **** stout.

[frizzen]

Zabco, i think you figured out why so many of the action figures are built like power lifters instead of normal people.

You'd be built too if everything was secured with 1 3/4" solid rods with bigger hardware, and log chains. Even my little 'ratchet straps' are 4" wide.
"Bro, do you even lift?"

[Bo Wallen]

Thats the big problem. Even as big as 1/14 scale seems, truly scaled down items are tiny and hard to handle. I use chain for tiedowns that has links 1mm in diameter. That scales to over 1/2 inch diameter in the real world. Unless you are trying to tie down something really massive most guys are going to use 3/8" chain. Simply too small to use at scale size if you could even find it.

Looks like your turnbuckles are using 3mm screws? Close to 1 3/4 inch in real world, pretty **** stout.

Zabco, i think you figured out why so many of the action figures are built like power lifters instead of normal people.

You'd be built too if everything was secured with 1 3/4" solid rods with bigger hardware, and log chains. Even my little 'ratchet straps' are 4" wide.
"Bro, do you even lift?"


Yes, I'm kind of tired of finding right scale parts, and who knows how many different scales there is in Tamiya Trucks if you start measuring parts. So if it looks cool and does what I need I'm OK with that. And if you go to a show, More than half of the audience would not see the fake scale anyway. Only hardcore professionals would suffer. And I'. OK with that too. :cop:

[Bo Wallen]

I forgot to say there is a crane at each end, so they have to deal with oversized
stuff. My back hurts anyway. :lol:

[egronvold]

Well, the first batch is done. Now over to test and classification. https://farm2.staticflickr.com/1886/43882473435_b550205433_b.jpg (https://flic.kr/p/29RK9vz)IMG_3267 (https://flic.kr/p/29RK9vz) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Let's hope it works. :cop:

They look very nice!

[Bo Wallen]

Thank You Much. Emil. Only need to make 40 more, and a few other special models for a special load.
This is part play an important role.

https://farm2.staticflickr.com/1912/43925042935_cabd6f45c9_b.jpg (https://flic.kr/p/29VvjWt)IMG_2254 (https://flic.kr/p/29VvjWt) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

[Bo Wallen]

ACHTUNG!



Therapeutic Sunday :eek:

https://farm2.staticflickr.com/1858/44142406044_482c800874_b.jpg (https://flic.kr/p/2afHnqh)IMG_3286 (https://flic.kr/p/2afHnqh) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Getting closer. I think I got this. :bounce:

[Cooper]

fabulous bo!!! I haven't been on site in a while , have to back read some good stuff!!

[Bo Wallen]

Thank You, Cooper. Yes and I admire your work. Well, I'm getting closer just 7 more to go of this.

https://farm2.staticflickr.com/1968/43088794820_2f64147968_b.jpg (https://flic.kr/p/28DBkvw)IMG_3294 (https://flic.kr/p/28DBkvw) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

I might be able to get a roller soon.

[Bo Wallen]

Axle Done WooHoo!

https://farm2.staticflickr.com/1963/44193951344_c5d7a264ee_b.jpg (https://flic.kr/p/2akgy3m)IMG_3300 (https://flic.kr/p/2akgy3m) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Now over to framework, steering, and other goodies.

[Bo Wallen]

A while back I fixed the upper part of the north wall. And now time for the lower part. 17'4" new workbench and some nice paint, and LED Lights.

https://farm2.staticflickr.com/1908/31232490928_9d86728a4e_b.jpg (https://flic.kr/p/PzUFqU)IMG_3309 (https://flic.kr/p/PzUFqU) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

https://farm2.staticflickr.com/1906/31232488958_c80b56522a_b.jpg (https://flic.kr/p/PzUEQW)IMG_3316 (https://flic.kr/p/PzUEQW) by Bo Wallen (https://www.flickr.com/photos/47955920@N04/), on Flickr

Bonus in this project is added workbench on the east wall too.6 feet.