Komatsu PC700 Excavator unboxing and review

[liftmys10]

As of yesterday (10/13/2016), I received a 240lbs wooden crate.
In this crate, a Komatsu PC700 excavator and a CAT 740 ADT.
I have made a 5 part unboxing/Bind and Dig video.
I will make a full detail review later on once I play with it some more.
Here are the pictures and videos:
Part1 Opening up the crate.
https://youtu.be/ZNw5d8ya8co

Part2 First look at the excavator & hardware/spare parts.
https://youtu.be/bWOZyH9EO2Q

Part3 Body door details.
https://youtu.be/2g4j5GNzSxE

Part4 Buckets and ripper details.
https://youtu.be/RRdxIfPk-ng

Part5 Bind and Dig video
https://youtu.be/X4Zd28d9IeM


http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161013_112034_zpsq4zo3g6v.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161013_112034_zpsq4zo3g6v.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161013_112303_zpsy8u87bac.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161013_112303_zpsy8u87bac.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161013_113906_zpsekstaeal.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161013_113906_zpsekstaeal.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161013_113914_zpsd8arqzso.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161013_113914_zpsd8arqzso.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161013_113916_zpsstuf31hz.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161013_113916_zpsstuf31hz.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161013_113932_zpsfleaq87u.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161013_113932_zpsfleaq87u.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161013_113934_zpsdxlbkwi5.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161013_113934_zpsdxlbkwi5.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161013_113936_zps3zssbshm.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161013_113936_zps3zssbshm.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161013_113944_zps4dbj8wvc.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161013_113944_zps4dbj8wvc.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161013_140729_zpsv8oixlbl.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161013_140729_zpsv8oixlbl.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161013_140738_zpsp3fac5h7.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161013_140738_zpsp3fac5h7.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161013_145015_zpswychm5gi.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161013_145015_zpswychm5gi.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161013_153656_zpsrzjbdlfq.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161013_153656_zpsrzjbdlfq.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161013_153710_zpsdkqxg369.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161013_153710_zpsdkqxg369.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161013_153812_zpsrwhqjpqq.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161013_153812_zpsrwhqjpqq.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161013_153831_zpsrh4e2hl9.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161013_153831_zpsrh4e2hl9.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161013_153855_zps5qphe3pt.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161013_153855_zps5qphe3pt.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161013_184553_zpsrguezcjs.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161013_184553_zpsrguezcjs.jpg.html)

[egronvold]

Beautiful models! Hours of fun ahead of you :) And propper packaging, that's not a given these days.

[Trucker Al]

WOW!! very nice....I want one..

[Cooper]

Does polou make the adt also? The ex looks like a very robust and smooth machine!! Looks like it will take a lot of abuse!!

[Howie]

Santa came early. Wow!!

[scottyk]

Who makes those? Those look like a great time!

[liftmys10]

Who makes those? Those look like a great time!

The Mother Earth Mover. They are a vendor on this forum.
http://www.rctruckandconstruction.com/forumdisplay.php?f=117

[liftmys10]

Practicing on the dinning table and a quick review. It's my second day of operating so the movements are not as smooth.
https://youtu.be/TTu6njPG448

[Rakthi]

Beautiful models! Hours of fun ahead of you :) And propper packaging, that's not a given these days.

Totally agree with egronvold. Lots of well thought out details in those models.

[liftmys10]

http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161015_101732_zpsdwmemze2.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161015_101732_zpsdwmemze2.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161015_101606_zpswm6sbcot.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161015_101606_zpswm6sbcot.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161015_101858_zps926kymc5.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161015_101858_zps926kymc5.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161015_101933_zpsc5sixboe.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161015_101933_zpsc5sixboe.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161015_102050_zpstrs2s0xt.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161015_102050_zpstrs2s0xt.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161015_102136_zpsl3vus6rd.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161015_102136_zpsl3vus6rd.jpg.html)

[thercfreak2012]

It's so cool my eyes can't describe it enough so nice ��������

[Mech_Eng]

That's one bad "Mother"!!

[paolo84verona]

thanks guys to appreciate our works.

:-D :-D :-D

[liftmys10]

Lifting CAT 740 (24.4lbs)
https://youtu.be/PdBV4PpSbTk

[ngward79]

That's impressive lifting the adt ! Does the machine come with the spare parts like the cylinder rebuild kit, extra chain links and the cab interior standard or is it cost extra?

[liftmys10]

That's impressive lifting the adt ! Does the machine come with the spare parts like the cylinder rebuild kit, extra chain links and the cab interior standard or is it cost extra?

Thanks! It comes with spare parts but not all. Some parts I had to pay extra like the interior cabin and spare speed control.
The cylinders are rebuildable and are true industrial hydraulics. The pump is also industrial. It's best to contact mother earth mover for more details and specs.

[Trucker Al]

I saw this machine at the California Trucking Show last weekend. All I can sat is this is the ultimate in quality and design. Thank you Shaun for bringing it to the show..
Alan

[liftmys10]

Dumping dirt into CAT 740
https://youtu.be/OHyU1AMNCGA

[liftmys10]

Smoother operating. Dumping dirt into CAT740
https://youtu.be/u1r9r4uL3GU

[liftmys10]

http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161103_170444_zpsjlhqe9m0.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161103_170444_zpsjlhqe9m0.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161103_170551_zpsbkvtonhs.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161103_170551_zpsbkvtonhs.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161103_173602_zps7gt1ke5g.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161103_173602_zps7gt1ke5g.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161103_170157_zpsjeostjrt.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161103_170157_zpsjeostjrt.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161103_170050_zpsw6q58fjx.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161103_170050_zpsw6q58fjx.jpg.html)

[avel]

Really like your videos.

[liftmys10]

Really like your videos.

Thanks!

[liftmys10]

Trenching for a water main through compacted Finish Grade house pads.
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161108_164156_zpsjkj6ftcy.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161108_164156_zpsjkj6ftcy.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161108_164311_zpse69tov9p.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161108_164311_zpse69tov9p.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161108_164522_zpsx6ih4tjl.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161108_164522_zpsx6ih4tjl.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161108_164627_zpshfk9fjcq.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161108_164627_zpshfk9fjcq.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161108_164656_zpsp6sbmnkt.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161108_164656_zpsp6sbmnkt.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20161108_164805_zpsqacf0zb7.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20161108_164805_zpsqacf0zb7.jpg.html)

[Trucker Al]

Beautiful...Just beautiful..

Alan

[liftmys10]

Just finished painting the operator, cabin seat, and Trimble GPS receivers. In the process of mounting the receivers. I plan on using magnet to mount it on the steel body. This will allow me to move the GPS around to anywhere on top of body.

http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170110_160115_zpsqnjkrmc2.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170110_160115_zpsqnjkrmc2.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170110_160937_zpszcclcwez.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170110_160937_zpszcclcwez.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170110_161300_zpsomjygszu.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170110_161300_zpsomjygszu.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170110_161005_zpsr5axu9pi.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170110_161005_zpsr5axu9pi.jpg.html)

[Stuart]

Nice! very nice indeed!

[Northern Farmer]

Good idea about the magnet, love your excavator :eek: :cool:

[liftmys10]

Thanks all.
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170116_180400_zps66wt94dq.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170116_180400_zps66wt94dq.jpg.html)

http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170116_131401_zpsnoyswwwq.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170116_131401_zpsnoyswwwq.jpg.html)

[Northern Farmer]

Nice detail work on grip tape :cool:

[Hofabooz]

Hi

Love the non slip tape looks great.

[liftmys10]

Made a detail review of the pc700. Shows all movements (fast and slow movements) and I try to describe as I go along in the video.
https://youtu.be/cS8AaJlKzB8

[Bo Wallen]

Thank You for a very good presentation/demo of the Mother Komatsu. I have had the urge to purchase a excavator for quite some time now. Just ben waiting for something good to show up on the market. Now i think it did. This machine looks fantastic. I have been looking at all your vid's and love what i see.
I think i have to move this way up the list of must have item's.......way up !
Again thanks for planting that bug in my brain.........:) Well Done.

[rc13]

Yes that machine is smooth. Pretty neat set up under the cover. Impressed...

[liftmys10]

Added hand rails.
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170208_224902_zpszvpl9pzy.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170208_224902_zpszvpl9pzy.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170208_225258_zpsqvchs9ka.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170208_225258_zpsqvchs9ka.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170203_231312_zpskcumjint.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170203_231312_zpskcumjint.jpg.html)

[Northern Farmer]

Some nice detail work :cool:

[liftmys10]

Added work lights toggled from the radio and painted the hand rails. Not sure what to do next as far as scale goes. Any suggestions?

http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170409_100304_zpsyegb7pe2.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170409_100304_zpsyegb7pe2.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170409_100251_zpsgmziq1er.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170409_100251_zpsgmziq1er.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170409_100515_zpspjkvotrw.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170409_100515_zpspjkvotrw.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170409_100628_zpsa4easvyv.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170409_100628_zpsa4easvyv.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170208_224902_zpszvpl9pzy.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170208_224902_zpszvpl9pzy.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170208_225258_zpsqvchs9ka.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170208_225258_zpsqvchs9ka.jpg.html)

[Valdosetti]

Wow! What a beautiful machine. Must load a road truck with two buckets!!!
Congrats!!!!

[Northern Farmer]

Saw the videos of it operating in the dark that's pretty slick :cool:

[trucker1970]

are you getting a smoke generator? I just bought one for my Damitz (hope it fits!) haha if it doesn't maybe you can buy it from me ��

[liftmys10]

Saw the videos of it operating in the dark that's pretty slick :cool:
Thanks!!

are you getting a smoke generator? I just bought one for my Damitz (hope it fits!) haha if it doesn't maybe you can buy it from me ��

I doubt I have room, what are the dimensions of it?

[trucker1970]

Thanks!!



I doubt I have room, what are the dimensions of it?

hahaha I don't even know lol

[trucker1970]

hahaha I don't even know lol

I just checked it's 110 mm x 60 mm x 30 mm not too big

[trucker1970]

I just checked it's 110 mm x 60 mm x 30 mm not too big



here's the link https://www.ebay.com/itm/112276897805

[Northern Farmer]

This is smallest smoke generator I found. Functions on 6 volts and measures 85L x 55W x 50H mm.

http://www.ebay.com/itm/Rc-model-boat-smoke-generator-6-volts-with-fliud-/182259268151?hash=item2a6f7fba37:m:mdm_l48eXyKWNm2 eXX_hLXw

[trucker1970]

oh nice I'm running 12v so I got the other one 30 mm tall and that is my biggest issue I'm not sure that will even fit... I'll just use it in my next one I buy if it doesn't fit

[Northern Farmer]

Question Shawn which battery are you running in the Komatsu ?

[liftmys10]

Question Shawn which battery are you running in the Komatsu ?

Uses Turnigy 14.8v 5000mah lipo from hobbyking. However the Pc700 comes with an adjustable step down regulator set to 12v in order to run the 2 fans, lights, etc...

https://hobbyking.com/en_us/turnigy-5000mah-4s1p-14-8v-20c-hardcase-pack.html?___store=en_us

[TheBennyB]

This is smallest smoke generator I found. Functions on 6 volts and measures 85L x 55W x 50H mm.

http://www.ebay.com/itm/Rc-model-boat-smoke-generator-6-volts-with-fliud-/182259268151?hash=item2a6f7fba37:m:mdm_l48eXyKWNm2 eXX_hLXw

The Tarr is pretty small as well.

http://www.rctankelectronics.com/store/p34/TARR_Smoke_Unit.html

[Northern Farmer]

Nice thanks Benny going to save the link :)

[liftmys10]

Haven't practiced in awhile so took advantage of Memorial Day. Digging in hard dirt. You can hear the bucket teeth scrapping.
https://youtu.be/SHWZU4D6bp4

[Northern Farmer]

Dream setup right there! Have fun playing Shawn :cool:

[liftmys10]

No photo shop.
https://youtu.be/nUIvuiKe8TA

http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170618_121521_zps8py4pdnw.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170618_121521_zps8py4pdnw.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170620_141352_zps44fxiaej.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170620_141352_zps44fxiaej.jpg.html)http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170618_132222_zpsu1ojrypg.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170618_132222_zpsu1ojrypg.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170620_141820_zpszajuxdqy.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170620_141820_zpszajuxdqy.jpg.html)
http://i271.photobucket.com/albums/jj123/liftmys10/Komatsu%20PC700%20and%20CAT%20740/20170620_140959_zpsc4itcj7r.jpg (http://s271.photobucket.com/user/liftmys10/media/Komatsu%20PC700%20and%20CAT%20740/20170620_140959_zpsc4itcj7r.jpg.html)

[egronvold]

Beautiful models and a rather big playground :)

[liftmys10]

Just finished installing SMB servonaut sound module. I'm still finalizing the mixing rates to get the appropriate noise at the right time. It's been a challenge.
https://youtu.be/_OEh9n2gQKg

[JAMMER]

Kershaw Designs MK3 8000 mAh 14.8V LiPo Pack
A LiPo pack pulled in just for those that want a ridiculous amount of 8S power for large 1/5 scale brushless applications.

70C Constant These are the batteries I run in my Vario excavator. Ed
4S
62*41*169mm Align
balancing plug

[liftmys10]

Figured out how to post with Flickr thanks to member Frizzen.
This was my first time seeing RC4wd products in person (besides all the youtube videos). I never realized how much smaller rc4wd excavators were compared to the PC700.
So I took several photos from different angles just to get an idea of the size differences.
https://farm5.staticflickr.com/4572/38532326066_cee31b1c39_c.jpg
https://farm5.staticflickr.com/4575/38532326476_245edeec01_c.jpg
https://farm5.staticflickr.com/4523/38532326766_42e072e934_c.jpg
https://farm5.staticflickr.com/4532/38532327336_77d8e99e82_c.jpg
https://farm5.staticflickr.com/4581/38532327626_8c67f86357_c.jpg
https://farm5.staticflickr.com/4572/37872602984_77ee36818b_c.jpg
https://farm5.staticflickr.com/4549/37872603264_8a5f6fbe37_c.jpg
https://farm5.staticflickr.com/4579/37701412505_d59ca8c0bc_c.jpg
https://farm5.staticflickr.com/4537/38532325756_f22c09df3b_c.jpg

[liftmys10]

RC4wd asked me if I can put a towel so it wont scratch the new trailer with the 91lbs PC700 :) The trailer is built very strong. It was perfect for the PC700.
https://farm5.staticflickr.com/4560/37886080524_6b3f009deb_c.jpg
https://farm5.staticflickr.com/4586/24717146748_561c9e065e_c.jpg
https://farm5.staticflickr.com/4516/24717146398_1b41ce867f_c.jpg
https://farm5.staticflickr.com/4565/38556698692_a844722e59_c.jpg
https://farm5.staticflickr.com/4527/38556698412_9f86be4afc_c.jpg
https://farm5.staticflickr.com/4545/24717147138_89a9e5ee09_c.jpg
https://farm5.staticflickr.com/4567/24717147448_e4de3d0c78_c.jpg
https://farm5.staticflickr.com/4524/24717147718_14c9e2dba7_c.jpg

I should have narrowed the trailer for the CAT740
https://farm5.staticflickr.com/4558/37872601344_654cb16f73_c.jpg
https://farm5.staticflickr.com/4565/37872601754_fc849952e6_c.jpg

[liftmys10]

And an added bonus!! Enjoy! Happy thanksgiving.
https://farm5.staticflickr.com/4524/38589599741_e2f4590b78_c.jpg
https://farm5.staticflickr.com/4529/38589600061_3ecbc81402_c.jpg
https://farm5.staticflickr.com/4563/38589599501_721909a102_c.jpg
https://farm5.staticflickr.com/4539/38589599181_c4e8479c59_c.jpg
https://farm5.staticflickr.com/4559/26812948379_1ecbe47c5c_c.jpg
https://farm5.staticflickr.com/4539/26812947919_0787581308_c.jpg
https://farm5.staticflickr.com/4543/26812947639_18709989a6_c.jpg
https://farm5.staticflickr.com/4572/26812947379_a842d1a94b_c.jpg

[Northern Farmer]

Great shots Shawn! :cool: The PC700 excavator seems to be the only excavator capable of loading RC4WD mining truck withouth the need of being elevated higher up.

[egronvold]

Well, no room for a PC700 in the basement ;)

[Northern Farmer]

I can’t help myself looking at the last set of pictures, the legs on that broad in white :eek:

[skeeter]

I was busy looking at that badonk a donk in the ball cap to her LHS (Left Hand Side)

[skeeter]

The one that has the LONG hair past her waist.

[liftmys10]

Great shots Shawn! :cool: The PC700 excavator seems to be the only excavator capable of loading RC4WD mining truck withouth the need of being elevated higher up.

Thanks! Yes that's safe to say.:D

[bigpipespete]

That ripper looks like it could be a lethal weapon.:eek:

[liftmys10]

Some minor scale updates to the PC700.
But first a little history. My only feedback to The Mother RC Construction was the rather unappealing rectangular shape engine hood cover. Paolo explained the reason for the rectangular shape was the result of making everything out of steel. I asked him if he can make an option with only the engine hood cover printed in 3D plastic. A month later he posted on shapeways :) That's customer service at its finest. Now for some pictures:
I had a local metal shop laser cut the new steel plate to match the 3d printed engine hood's curves. I'm keeping the original as backup.

I also plan on adding hinges so I can open up the engine hood like the 1:1 scale.

https://farm5.staticflickr.com/4592/38232946075_f55772391f_c.jpg
https://farm5.staticflickr.com/4683/38232946905_03b11c2265_c.jpg
https://farm5.staticflickr.com/4730/38232946585_1d118ea6fc_c.jpg
https://farm5.staticflickr.com/4682/38232947125_d03a82c01a_c.jpg
https://farm5.staticflickr.com/4688/38232947535_4525032a39_c.jpg
https://farm5.staticflickr.com/4639/38232948445_e0c9639d76_c.jpg
https://farm5.staticflickr.com/4600/38232949015_a5aefa82d1_c.jpg
https://farm5.staticflickr.com/4732/38232949505_21f91d7889_c.jpg
https://farm5.staticflickr.com/4596/38232950915_accb21d9a4_c.jpg
https://farm5.staticflickr.com/4596/38232951785_3840f52c63_c.jpg
https://farm5.staticflickr.com/4733/25248004608_f5484968e3_c.jpg
https://farm5.staticflickr.com/4688/39119097061_719af702cb_c.jpg
https://farm5.staticflickr.com/4689/39119098131_610ebd3d8a_c.jpg

[bigpipespete]

I see now what you meant about the original being a bit too square. Once you get that painted and the exhaust on, it will look true to scale.

[Northern Farmer]

Great customer service right there! Keep us posted how the new hood come’s out. Love your excavator :cool:

[jjackso5]

Shawn, great pictures of the equipment and show area. Do you have any other pictures of the trailer and the mining truck?

What is the max load on that trailer? And, how did the mining truck perform?

Thank you for sharing the pictures of the show.

Jim

[bigpipespete]

Hows the paint on the new hood coming along ?

[liftmys10]

Hows the paint on the new hood coming along ?
I picked up the air compressor and paint gun from my parents house yesterday. I'll have to practice on something first as this will be my first time using a paint gun.
Do you have any other pictures of the trailer and the mining truck?
What is the max load on that trailer? And, how did the mining truck perform?

I have other pictures of the giant dump truck and video. PM me your email address and I'll send some out. The truck definanatly has a wow factor. But I can't speak for its performance or drivetrain. We did convince an adult female to sit in the back and it drove around with no problems. But there is a YouTube video of this guy who's had some serious issues with breaking gears in the transmission. You might want to look there and ask him.

[jjackso5]

Shawn, I sent you a pm for the pictures and video of this show.

Did you have the link to the YouTube for the video of the Mining truck?

Thank you,

Jim

[liftmys10]

Shawn, I sent you a pm for the pictures and video of this show.

Did you have the link to the YouTube for the video of the Mining truck?

Thank you,

Jim
https://youtu.be/IPQJF9Glr1c

[Monster Mudder]

No issues with a King Hauler pulling a 91 pound excavator?

[liftmys10]

No issues with a King Hauler pulling a 91 pound excavator?

I don't think so. Maybe Riley can fill in since it was his KH.
Here is a video i just uploaded. https://youtu.be/tDipd1S7nmU

[Northern Farmer]

No issues with a King Hauler pulling a 91 pound excavator?

I’ve seen a king hauler pull 160lbs on a Rc4wd lowboy without issue. You just need a PMD 4:1 reducer, metal fifth wheel plate, and strong/stiffer rear suspension. Oh ya and hard foam tire inserts :cool:

[doodlebug]

It looks to me, like the speed controller ramps up too fast. If it has a brake function, turn it off. Or a more programmable radio?
Cheers, Neil.

[frizzen]

https://youtu.be/IPQJF9Glr1c

That's a cool looking truck.

Some things to try for eating gearmotors
Is there a dragbrake on the esc? Set it off or low
Does your tx have exponential? Change throttle curves to softer around the deadband
Punch control? Set it softer
Brakes? Set off or really low

[Alokocat]

Hi all,

It's been a while since I posted on this forum, I have been away from RC construction machine for a few years now.
I'd like to get back on track and I really like this model, the 70Tons excavator is my favorite target and the price looks like it's a great value.

Im more interested by a reliable machine with lots of diggin power than cosmetics.

I've contacted Paolo, which seems like a very professional guy with amazing craftmanship, but I'd like to hear back from an actual user of this model.
there isnt much videos on the internet and very few threads in german forums AFAIK, so it's difficult for me to get an idea of this model reliability.

So Shawn, seeing that you've been using this model for a few months now I'd like to get feedback from you if you dont mind, could be in MP if you prefer.

Would you recommend this model ? any hint would be appreciated really.
Thanks,

Dimitri.

[paolo84verona]

Hi dimitri. Thanks to apreciate my work. I work a lot for make this model perfect. We work for the detail and performance. We fix some little problem with some professional thing. We make our gearbox with full metal gears and now we are around at 200kgcm force. Now we have massive torque and power. We are on the way to send another model to usa. Our facebook page have a lot of pictures and video. In any case if you need to see something in particular please let me know and contact me. Thanks and follow us. Paolo

[liftmys10]

So Shawn, seeing that you've been using this model for a few months now I'd like to get feedback from you if you dont mind, could be in MP if you prefer.

Would you recommend this model ? any hint would be appreciated really.
Thanks,

Dimitri.
Considering the fact that it uses Premacon's pressure relief valve and valves, the reliability would be the same with the Germans for that portion.

The hydraulic oil pump and the cylinders are again from major manufacturers that have been proven in other industrial applications. I can confidently say not a single drop of oil from any of these components. The hydraulic system is robust and works flawlessly. The oil stays very cool thanks to a radiator and fan.
My only concern, it does not have an oil filter. I have brought this up to Paolo and he has assured me that it is not of concern as one can easily change hydraulic fluid since the tank is visible and inspection of oil is a breeze. It is marked how much to fill "min and max." Uses Mobil DTE 24 which is sold in 1 gallon instead of 5 gallons.
The electric motor and esc for the pump is from hobbyking and is readily available and inexpensive. So I'm not worried about that.

I haven't had any issues with my gearbox for the tracks but looks like Paolo has updated the gearbox with all metal gears and is much more powerful than the one i have in mine. Mine feels plenty strong so I can't imagine or comment on the newer one.

The servos are hitec and works well with the Premacon valves. There are 2 electric fans that kick on when the set temp hits above it. The temp probe is located on the pump.

The quality and craftsmanship of the metal frame and paint is perfect. I don't know any other manufacturers that uses ball bearings at the pivots for the dipper arms.

All wires are tucked away and makes the inside look clean. This takes time to do and I can certainly appreciate that.

The lack of details gives the owner a chance to finish off the pc700 with custom details. It gives a little something to do on your part.

I would recommend it but beware of the weight (90lbs). For the price and performance, none of the others come near it.

[Alokocat]

Hi dimitri. Thanks to apreciate my work. I work a lot for make this model perfect. We work for the detail and performance. We fix some little problem with some professional thing. We make our gearbox with full metal gears and now we are around at 200kgcm force. Now we have massive torque and power. We are on the way to send another model to usa. Our facebook page have a lot of pictures and video. In any case if you need to see something in particular please let me know and contact me. Thanks and follow us. Paolo

Paolo, once again thanks for taking the time to explain and answers my questions.
I can see you love your work on theses machines !

Considering the fact that it uses Premacon's pressure relief valve and valves, the reliability would be the same with the Germans for that portion.

The hydraulic oil pump and the cylinders are again from major manufacturers that have been proven in other industrial applications. I can confidently say not a single drop of oil from any of these components. The hydraulic system is robust and works flawlessly. The oil stays very cool thanks to a radiator and fan.
My only concern, it does not have an oil filter. I have brought this up to Paolo and he has assured me that it is not of concern as one can easily change hydraulic fluid since the tank is visible and inspection of oil is a breeze. It is marked how much to fill "min and max." Uses Mobil DTE 24 which is sold in 1 gallon instead of 5 gallons.
The electric motor and esc for the pump is from hobbyking and is readily available and inexpensive. So I'm not worried about that.

I haven't had any issues with my gearbox for the tracks but looks like Paolo has updated the gearbox with all metal gears and is much more powerful than the one i have in mine. Mine feels plenty strong so I can't imagine or comment on the newer one.

The servos are hitec and works well with the Premacon valves. There are 2 electric fans that kick on when the set temp hits above it. The temp probe is located on the pump.

The quality and craftsmanship of the metal frame and paint is perfect. I don't know any other manufacturers that uses ball bearings at the pivots for the dipper arms.

All wires are tucked away and makes the inside look clean. This takes time to do and I can certainly appreciate that.

The lack of details gives the owner a chance to finish off the pc700 with custom details. It gives a little something to do on your part.

I would recommend it but beware of the weight (90lbs). For the price and performance, none of the others come near it.

Thanks Shawn for the detailed review, this is exactly what I was looking for.
I can see the weight being tricky to handle, but at the same time it should add some diggin and operating power, so that's fine for me.

Im definitly sold on this one :D
Bring some videos while I save my money !

[liftmys10]

Easter egg hunt videos.
https://youtu.be/qJqDBhbhRbM
https://youtu.be/CaY_q6McAm0
https://farm1.staticflickr.com/893/40278958155_a62f7b8922_c.jpg
https://farm1.staticflickr.com/802/40278958335_a0a6ca49e7_c.jpg
https://farm1.staticflickr.com/876/40278958535_b772bb9aa9_c.jpg
https://farm1.staticflickr.com/796/40278957985_ec81cd747f_c.jpg

[Alokocat]

Thanks for the Easter Egg Videos !
I am never tired of watching videos like yours.

I wouldnt mind a camera closer to the action if I may ask ...;)

[jack van]

so how many eros is the pc 700 again without the vat ?

[liftmys10]

My first attempt with the FPV goggles loading Cat 740. A quick review of the FPV setup starting at 7:11 min mark.
https://youtu.be/qVmIUoQGHAM

[liftmys10]

My first attempt with the FPV goggles loading Cat 740. A quick review of the FPV setup at 7:11 min mark.
https://youtu.be/qVmIUoQGHAM

[liftmys10]

My first attempt with the FPV goggles loading Cat 740. A quick review of the FPV setup at 7:11 min mark.
https://youtu.be/qVmIUoQGHAM

[skeeter]

When do we get to see FPV video of them machines hard at work?

[liftmys10]

When do we get to see FPV video of them machines hard at work?

Yesterday i received the microSD which will go into my SkyZone sky02s goggles to enable DVR recording. Unfortunately it will not be recorded in 3D as i see thru the goggles. It will only be 2D since it records the video thru one camera. I plan on recording the sound thru the built in microphone on the video transmitter (VTX).

I am charging my lipos as I type this out. So hopefully tonight i will have the video posted on YouTube. I was surprised a few others were also inquiring on the FPV video. So i hope it looks and sounds good when all said is done.

My honest opinion on FPV.
I am 2 weeks into FPVing. I recently put my gear on my sx10 crawler and from my 2nd story patio, i took it around my apartment complex. I felt like the first time ever driving an RC car. It put a huge smile on my face and it really took things to the next level. For the first time i reached the radio range limits on my Airtronics MT-4 before even losing video transmission reception.
My father who has zero experience driving RC cars was able to drive my sx10 with absolutely no issues at all for at least 30 minutes until the battery died out. It takes alot for my father to say "that was fun".

[liftmys10]

Alright, my first FPV video recorded from the camera located just above the cabin roof.
What I see thru my Skyzone sky02s goggles are much better picture quality and in 3D compared to this 2D video I uploaded. The goggles make it a lot easier compared to watching this video. Hope that make sense.
I get better towards the end. Hope you enjoy!
https://youtu.be/cjptvf1_bhM


Starting at the 3:20 min mark, I clean up the dirt spills for the CAT 740 landing spot.
https://youtu.be/sXglJ07h6oA

[Hemi1966]

Wow man, that looks very realistic. Your operating skills are also great:)

[Lil Giants]

Pretty nifty Shawn, looks like a lot of fun :cool: