Connector/Plug ID

[elephants14]

Okay...
So I'm on a mission. It strives from a "don't want" not a "can't do"... My goal is not cut and solder into the original wires. simply get extension wires for quick work.

I am Attempting to stretch my Aeromax.

I finally found a MFU trailer plug 6 connector extension, had to trim it, but it fits...http://www.ebay.com/itm/121367876336?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
JST 2.5mm XH 6-Pin Connector Extension Wire Male to Female
it plugs up. just had to remove the "walls" on the socket to get it to plug. So even a "real" name for that would be epic...

What I'm NOT able to find is the 2 way, usual Tamiya LED light plug.... What the heck is it called? Like a actual name for it?

I bought what I thought it was, turns out I'm wrong....


Any input would be appreciated!
Thanks
Cody

[Northern Farmer]

Think what your looking for can be found here.

https://astecmodels.co.uk/shop/index.php?cPath=31_32

[elephants14]

Well, I've already talked to him...

He only sells the single ends, not a extension, nore was he helpful in ID-ing... also he has all this items custom made, and unless I wanted 5000 units, it was clear he wasn't helping source them...

[Northern Farmer]

Well, I've already talked to him...

He only sells the single ends, not a extension, nore was he helpful in ID-ing... also he has all this items custom made, and unless I wanted 5000 units, it was clear he wasn't helping source them...

Try Rcbrmin

http://www.rcbrmin.com/index.php?main_page=index&cPath=66_108

[elephants14]

Dude, I have been to that side alotta times over the years looking at various things, I like getting ideas from all the sellers, and figuring what I like....
I don't think I've ever seen that before. Jeeze....

I can't lie, I've spent a few months on and off looking for the page basically you just sent.. ****. Must need to go back to school to learn better googling!

[Northern Farmer]

:lol::lol: Hey atleast you found what you need now :D Just a tip, I ordered a bunch of these light extensions when building my rig a while back. You need to take a razor blade to remove the plastic tab on the connection to make it sit right if connecting to MFC unit.

https://s24.postimg.org/9omn16wad/IMG_3315.jpg

[elephants14]

For sure, Definetly.

I mean I "know" I've looked on there site before and never saw them. maybe I just didn't realize what it was at the time. haha.