W900 Studio Sleeper Project

[HAZMAN]

It been a while since my last Aerodyne project, but this is the build I always really wanted to do. So far she's just a rolling, but this is how I planned it as I wanted to focus on the body and interior. Installed clear styrene for the windshield and windows and some more filler work needed to get the window trims right. Stay tuned....

[skeeter]

No pics show for me

[540-MAN]

Pics not working.

[HAZMAN]

Working on it.

[HAZMAN]

http://http://i77.photobucket.com/albums/j69/Limitedtim/20171201_142643_zpsuq5qmn0b.jpg (http://s77.photobucket.com/user/Limitedtim/media/20171201_142643_zpsuq5qmn0b.jpg.html)http://http://i77.photobucket.com/albums/j69/Limitedtim/20171201_142648_zpsm2dzgzgh.jpg (http://s77.photobucket.com/user/Limitedtim/media/20171201_142648_zpsm2dzgzgh.jpg.html)http://http://i77.photobucket.com/albums/j69/Limitedtim/20171201_231529_zpspoqzd2tn.jpg (http://s77.photobucket.com/user/Limitedtim/media/20171201_231529_zpspoqzd2tn.jpg.html)http://http://i77.photobucket.com/albums/j69/Limitedtim/20171201_231535_zpsteyns1pa.jpg (http://s77.photobucket.com/user/Limitedtim/media/20171201_231535_zpsteyns1pa.jpg.html)http://i77.photobucket.com/albums/j69/Limitedtim/20171201_231535_zpsteyns1pa.jpg (http://i77.photobucket.com/albums/j69/Limitedtim/20171201_231546_zpsmikhm6qn.jpg)"]http://i77.photobucket.com/albums/j69/Limitedtim/20171201_231546_zpsmikhm6qn.jpg (http://s77.photobucket.com/user/Limitedtim/media/20171201_231546_zpsmikhm6qn.jpg.html)[/URL][URL="http://[URL=http://s77.photobucket.com/user/Limitedtim/media/20171201_231659_zpssniyzeps.jpg.html]http://i77.photobucket.com/albums/j69/Limitedtim/20171201_231659_zpssniyzeps.jpg[/URLNew Pics of the W900 Project.

[TRUCKMAKER]

Those aren’t going to work either. Try this site: https://postimg.org/image/3z5gwj7k9/

[skeeter]

I like it a lot. How long are the frame rails on this build?

[skeeter]

What are you using to lower/raise the drop axles? Do you have pics of the underside of the lift axles? How are you keeping them straight while driving, & turned while turning? These are all questions I have, as I've yet to sort how I shall make all those functions properly work when I build the 7 axle SUPERdump I intend to build in the near future.

[bigpipespete]

Wow that's a lot of axles :jaw:

[bigford]

Wrong thread. Was supposed to be in rcp post side

[HAZMAN]

Some Pics.


https://postimg.org/image/ijmq5itk9/[20171201_231613.jpg](https://postimg.org/image/8d0chns9l/)https://s20.postimg.org/dof92dtrx/20171201_231529.jpghttps://postimg.org/image/tzfcyp69l/[URL="[20171203_160328_zpsztlsnavx.jpg](https://postimg.org/image/ijmq5itk9/)"][20171203_160328_zpsztlsnavx.jpg

[frizzen]

Wow those are messed up urls and tags. Let me play...

Some Pics.

https://s20.postimg.org/qsktf26e5/20171201_231613.jpg

https://s20.postimg.org/j95ihvu3x/20171203_160328_zpsztlsnavx.jpg

https://s20.postimg.org/dof92dtrx/20171201_231529.jpg



Pretty cool looking truck, sleeper looks sweet

Click Share, select Hotlink for forums. I deleted the hyperlink url, but kept the image tag

[HAZMAN]

Thanks Frizzen I'll be sure to do that with the next set of Pics.

[HAZMAN]

http://https://s20.postimg.org/uh2qwh0lp/20171201_142640_zpsmowxsqgy.jpg (https://postimages.org/)

[HAZMAN]

http://https://s20.postimg.org/5wyj3nhv1/20171203_160351.jpg (https://postimg.org/image/j143gc9wp/)

[HAZMAN]

http://https://s20.postimg.org/fhi5qh9r1/20171203_160342.jpg (https://postimg.org/image/ef7z7xqxl/)

[markturbo]

Looks good.

[HAZMAN]

Thanks, Just finishing up on the body work and very soon paint. I'm gonna try painting the grille chrome and the body in a two tone gloss black and tan. More Pics

https://s20.postimg.org/71ehiykp9/20171219_185703.jpg (https://postimg.org/image/j39vd3txl/),https://s20.postimg.org/wk6tvzbz1/20171219_185201.jpg (https://postimg.org/image/9vhmweul5/),https://s20.postimg.org/hbgwibsm5/20171219_191306.jpg (https://postimg.org/image/wwy82a4k9/),https://s20.postimg.org/8gg27sgod/20171219_191219.jpg (https://postimg.org/image/ptqcmnbzd/)

[bigford]

Your going to have to get the grill as smooth as possible
But when you do. Use this for the paint
Molotow Liquid Chrome 1mm Mirror Effect Pump Marker
Drain the paint and airbrush it on

[PrimeRigg]

question to Bigford about airbrushing the Molotow Liquid Chrome Marker. Is a basecoat needed to get the full mirror effect on the styrene?

Thank you.

[HAZMAN]

Thanks Bigford, I'll try that out. I was actually going to use Dupli color Chrome using gloss black as the base, but I'll go with your suggestion instead.

[Papy]

Nice build !

I've also been recommended to use alclad products for the chrome effect (and this includes a black coat as primer) but never tried.
Really interested to see how this will turn out !

I found this nice tutorial :

Chroming with Alclad (https://www.youtube.com/watch?v=4AKxXZXTcY4)

[Zabco]

I use Alclad II lacquers fairly frequently. They work well if you take your time and really prep the surface. Sand through at least 2000 grit, even finer if you can. Make sure surface is clean. Use the Alclad gloss black base for a chrome finish. I've been told you can use any gloss black but have always had the best finish using the Alclad. Very important to follow air pressure setting instructions on bottle for your airbrush. Mix paint in bottle very thoroughly before using. I use a battery powered mixer. Don't wait before spraying as the metal particles in the paint will start to settle out quickly. Very light, almost dusting coats. The Alclad will dry almost instantly but wait about 20 to 30 seconds between each coat and then gently buff with very soft cloth or tissue before applying the next coat. I usually wait about 24 hours between base coat and finish chrome coats. Alclad also now has a material called Aqua Gloss Clear ALC600 that can be used as a protective overcoat. It is, in my opinion, better than the modler's old standby; Future Floor Finish. Also you will want to use the Alclad airbrush cleaner. I use this on my airbrushes even if I've only been spraying acrylics, best cleaner I know of.

[HAZMAN]

I've purchased a can of Alclad Chrome a few years ago but never used it as it dried up. I'm gonna practice on some leftover styrene for good measure. I really appreciate the input on this guys.... Thanks!! I really want this KW to come out right. I've been in this hobby for twenty one years and this build by far has me shooting for a 1 to 1 comparison to the real W900.

[Zabco]

I should probably also mention that with the Alclad you will not get the real bright and shiny chrome finish that looks like the chrome plating on plastic models. To my eye I think it looks much more realistic and with proper surface finish before painting is very nice. I definitely recommend some practice before trying on real parts. But if you goof it can be removed for a do-over with the cleaner.

[Cossett]

I should probably also mention that with the Alclad you will not get the real bright and shiny chrome finish that looks like the chrome plating on plastic models. To my eye I think it looks much more realistic and with proper surface finish before painting is very nice. I definitely recommend some practice before trying on real parts. But if you goof it can be removed for a do-over with the cleaner.

Ive been reading 1/24-5 car and truck forums for years and if you do all the prep work before, during and after spraying with a air brush ( with it properly mixed ) Alclad comes dam close to mirror finish as I questioned a few guys on there chrome work as I though they used BMF or other chrome tape but they said no it was Alclad but takes time perfecting its use.

Cheers Tracy

[HAZMAN]

Progress on project W900 SS is moving along. Tried the Alclad and not happy with the grill so ordered the Molotow Liquid Chrome. Still have to finish the wiring for the lighting and interior. More to come.

https://s20.postimg.cc/66ycadqr1/20180410_221447.jpg (https://postimg.cc/image/rglyl871l/)

https://s20.postimg.cc/mhyg6nsy5/20180410_221452.jpg (https://postimg.cc/image/t8exg3g3t/)

https://s20.postimg.cc/798iswep9/20180410_221502.jpg (https://postimg.cc/image/6wh4mpwfd/)

[HAZMAN]

One more Pic.

https://s20.postimg.cc/n802lvyz1/20180410_221710.jpg (https://postimg.cc/image/91kbqno3t/)

[wolfws6]

Wow!!!! Looks great! :D

[Hostile]

Looks good. What you need to try is alsa easy chrome. Very expensive. $250 australian for about 250 mls. Spray the item a gloss black 1st and then spray chrome on top. It can be put in a spray can. One of my friends used this on a pair of fibreglass bumpers on a car he rebuild. Said the 250ml can was enough for both!

https://m.youtube.com/watch?v=YK0etoWJINY

[HAZMAN]

Looks good. What you need to try is alsa easy chrome. Very expensive. $250 australian for about 250 mls. Spray the item a gloss black 1st and then spray chrome on top. It can be put in a spray can. One of my friends used this on a pair of fibreglass bumpers on a car he rebuild. Said the 250ml can was enough for both!

https://m.youtube.com/watch?v=YK0etoWJINY

Thanks Hostile, I'll definitely try the Alsa if the Molotow Liquid Chrome doesn't work as I already ordered it. The price is indeed steep for the hobby , but I'm sure that I can find several thing to chrome.

[ramjetexpress]

I know what I would do .. Take a picture like this https://www.ebay.com/itm/Chrome-Kenworth-W900-Grill-Surround-/141163539436 with the exact measurements of your grill to a graphics shop and have them cut it in chrome vinyl . I love the W900 with studio sleeper that your doing and it's got me thinking of doing one . Luckily for me I can cut that grill decal at home .

[HAZMAN]

http://https://s20.postimg.cc/apz8eh3bh/20180505_220022.jpg (https://postimg.cc/image/xeofe1kp5/)http://https://s20.postimg.cc/sg0wzcwa5/20180505_215158.jpg (https://postimg.cc/image/8y69jezc9/)http://https://s20.postimg.cc/ad7u82v9p/20180505_214615.jpg (https://postimg.cc/image/7vw30tbd5/)http://https://s20.postimg.cc/g1e4yzmrh/20180505_214631.jpg (https://postimg.cc/image/n4m0els6x/)http://https://s20.postimg.cc/plxrltenh/20180505_214124.jpg (https://postimg.cc/image/o6w6x3dk9/)http://https://s20.postimg.cc/ad7u82fu5/20180505_214549.jpg (https://postimg.cc/image/g1e4yyk6h/)https://s20.postimg.cc/nu4sr15m5/20180505_215413.jpg (https://postimg.cc/image/t5jpbqrop/)http://https://s20.postimg.cc/qo7y4g57h/20180505_215012.jpg (https://postimg.cc/image/kaiv170bd/)http://https://s20.postimg.cc/wp5n1nx0d/20180505_215559.jpg (https://postimg.cc/image/pyp5s89uh/)http://https://s20.postimg.cc/lpkfq31gd/20180505_220112.jpg (https://postimg.cc/image/x1x17va55/)Finally done with this project as I finished the interior and painted the grille. Used the Molotow liquid http://https://s20.postimg.cc/7j4oun8j1/20180505_214908.jpg (https://postimg.cc/image/ge5j55xbd/)chrome and I'm okay with the results.

[ramjetexpress]

friggin sweet

[skeeter]

Sweet!

[HAZMAN]

Thanks' Guys...

[DrDiff]

Where did you get the lettering and state decals on the sleeper. My Freightliner Cascadia needs some!

[HAZMAN]

Where did you get the lettering and state decals on the sleeper. My Freightliner Cascadia needs some!

The Decals are from a left over Grand Hauler build, as I always purchase extra decals sheets as some have more exact detail than others , and I may want to add more effects or do custom dash gage setups.

[ittigger]

Very nice!!!

[HAZMAN]

New LED Bumper lights.https://s20.postimg.cc/98peojthp/20180519_232406.jpg (https://postimg.cc/image/n2drdlm2x/)https://s20.postimg.cc/h1g2gm77h/20180521_203953.jpg (https://postimg.cc/image/p6y4ervg9/)https://s20.postimg.cc/laksisxm5/20180530_205701.jpg (https://postimg.cc/image/jirtnwe95/)

[HAZMAN]

http://https://s20.postimg.cc/h1g2gm77h/20180521_203953.jpg (https://postimg.cc/image/p6y4ervg9/)