Battery stuff

[Cat966c]

Okay; I was going to put this in the electronics section, but the last update there is 2015 ��
So; I bought a turnigy nano tech 7.4v 3000 mah battery and it says it’s a receiver pack but I was wondering if it would work as a main battery for the loader??? I don’t see why it wouldn’t.
This is it: https://www.walmart.com/ip/RC-Turnigy-nano-tech-3000mAh-2S2P-20-40C-Lipo-Receiver-Pack/873194642?wmlspartner=wlpa&selectedSellerId=14952&adid=22222222228111120914&wl0=&wl1=g&wl2=m&wl3=233498281659&wl4=pla-383380809496&wl5=9009473&wl6=&wl7=&wl8=&wl9=pla&wl10=118770891&wl11=online&wl12=873194642&wl13=&veh=sem

[liftmys10]

Which wheel loader? It should be fine. Only difference is thinner wires and jst style plug which we all resolder with different kinds.

[Cat966c]

Thanks. The 966 I’m making. It’s in 1:14

[Cat966c]

Thanks for the reply. However now I need to know if the bullet connectors on the m3 hydraulic magom pump would work with these female bullets on this esc
https://m.ebay.com/itm/30A-Brushless-ESC-Speed-Control-with-Banana-T-Plug-BEC-2A-5V-for-RC-Quadcopter-/351943481540?_trksid=p2385738.m4383.l4275.c10&_mwBanner=1

[skeeter]

Thanks for the reply. However now I need to know if the bullet connectors on the m3 hydraulic magom pump would work with these female bullets on this esc
https://m.ebay.com/itm/30A-Brushless-ESC-Speed-Control-with-Banana-T-Plug-BEC-2A-5V-for-RC-Quadcopter-/351943481540?_trksid=p2385738.m4383.l4275.c10&_mwBanner=1

Best advise I can give, is to mic them & the one that you intend to use with it. If they DON'T fit together, bullet plugs can be found inexpensively on Evilbay. They're not that bad to cut off, & solder new ends onto them.