View Full Version : EXHD Peterbilt
CustomRig
03-11-2018, 12:04 PM
I have been working on 3D printing parts as well as designing the engine. The truck body will be next, but I have to get the dimensions of the engine just right. I am basing this off of a CAT 3406C. With the current King Hauler body, the engine won't fit with the radiator and other parts. I would need to scale it down, but it may be too small. I am afraid this one is too big. I can keep it this size and print the hood longer than what the kit comes with to accommodate the engine which would make everything come out right.
https://s13.postimg.org/o9xsn5fbn/Body_with_Engine.jpg (https://postimg.org/image/o9xsn5fbn/) https://s13.postimg.org/vpx28xvb7/Body_with_Engine_-_2.jpg (https://postimg.org/image/vpx28xvb7/)
https://s13.postimg.org/674pvym1v/IMG_20180310_211236.jpg (https://postimg.org/image/674pvym1v/) https://s13.postimg.org/54ujdeg37/IMG_20180310_211246.jpg (https://postimg.org/image/54ujdeg37/)
https://s13.postimg.org/g4fqp0e83/IMG_20180310_211254.jpg (https://postimg.org/image/g4fqp0e83/) https://s13.postimg.org/o9xsn6pmb/IMG_20180310_211302.jpg (https://postimg.org/image/o9xsn6pmb/)
ramjetexpress
03-11-2018, 02:07 PM
Cool , I was thinking about a 3d printed engine as well , looking for a G-Code
rc_farmer
03-18-2018, 06:38 PM
If you design the engine where the electric would fit inside, would be a great thing.
CustomRig
03-27-2018, 10:24 AM
So here is where I am now. I have been working on the design of the engine for a while. I am ready to paint some parts and start gluing it together. Took 21hrs for engine alone without all the accessories. Hope to get more pics soon.
https://s17.postimg.org/6gkykk5zj/Motor.jpg
This is where the truck is at. I am also working on the drive shafts and carrier bearing.
https://s17.postimg.org/b2h2sx6y7/Truck.jpg
Here is what I am going for, will see what it turns out like in the end.
https://s17.postimg.org/ti1jqbssf/novcvrpic01.jpg
CustomRig
03-27-2018, 10:28 AM
https://s20.postimg.org/nvh7vtt2l/Parts_of_Engine.jpg
CustomRig
03-27-2018, 10:29 AM
https://s20.postimg.org/h6aofhusd/Air_Cleaners.jpg
wolfws6
03-27-2018, 10:42 AM
Looks like an awesome build!!! :D
Panther F
03-27-2018, 11:01 AM
I think everyone needs a printer these days. That engine is impressive!
ramjetexpress
03-27-2018, 06:10 PM
Awesome Cat .. love to have the files for that one .. The one I printed closer resembles a block of plastic that I think looks more like a Cummins
I have a Monoprice Mini Select 3D printer , awesome for under 200 bucks
CustomRig
03-27-2018, 11:03 PM
Thanks for the comments guys. I have about 3 weeks of work into this engine. I will make them ready for sale by the end of May I hope. Too much time into these to get it just right to give the files away.
Fury Fan
04-02-2018, 11:02 PM
Nothing wrong with getting a little $$ for your work, esp if you did both the 3d modeling and the printing setup yourself.
skeeter
04-03-2018, 01:06 AM
That looks good. Can't wait to see the finished product!
CustomRig
04-04-2018, 12:07 PM
Reprinting the radiator right now, but it is getting there. Printing the hoses is next.
https://s20.postimg.org/orbwsw3xp/Completed_Engine.jpg
Here we have the side step, step boxes and fenders printed out. Tanks are polished and installed with aluminum end caps held in place by a printed solid round insert.
https://s20.postimg.org/eu0w00jj1/Rear_Side_Shot.jpg
ramjetexpress
04-04-2018, 12:58 PM
Looks fantastic
ramjetexpress
04-04-2018, 01:04 PM
Can I ask a question with-out ticking anyone off . I see your using the same 3d printed rear Air Ride set up as I am , but where are the shocks ?
CustomRig
04-04-2018, 08:49 PM
I didn't put the shocks on yet
CustomRig
04-30-2018, 08:42 PM
Here is the body completed. Reprinting most of it as the ABS I was using did not work well. I also added strength joints to the interior of the parts.
https://s20.postimg.cc/z7t67yh3h/IMG_20180501_073153.jpg
CustomRig
06-26-2018, 09:04 AM
Here is the motor now.
https://s20.postimg.cc/uu7xwcc9p/IMG_20180611_171122.jpg
https://s20.postimg.cc/6dps1vj8t/IMG_20180611_171207.jpg
https://s20.postimg.cc/97sxfc0ul/IMG_20180611_171218.jpg
https://s20.postimg.cc/uu7xwd74t/IMG_20180611_171229.jpg
CustomRig
06-26-2018, 09:12 AM
The electric motor fits inside and the wires come out the side of the printed motor.
ramjetexpress
06-26-2018, 06:16 PM
Awesome work there dude .
Zabco
06-26-2018, 07:43 PM
Really looking good. Love the Cat 3406. Had a very distinctive sound.
vBulletin® v3.8.6, Copyright ©2000-2024, Jelsoft Enterprises Ltd.