frizzen
03-29-2018, 03:54 AM
I'd ordered a "WPL B1" diy kit quite a while back, and i assumed it was being sailed over on the traditional chinese sailing vessel with the curved sails. Today the guy finally finished kicking it all the way from China to Indiana, that personal touch is nice.
The instructions don't give you much. Part fitment is a little bad.
https://i.imgur.com/3QaH2znh.jpg
Going off the width at cab step, it's around 1/17 scale.
https://i.imgur.com/UBtqbdhh.jpg
https://i.imgur.com/Ryt8vBdh.jpg
The kit comes with a pack of grease, a harness with 2 Led, a motor already hooked to a gearbox, and a servo with a Dragon.
There are a ton of guys out there making 3d printer parts. Bumpers, transfer cases for better motors, rims for better tires, 5th wheels, better scaled parts...
After getting it built up it seems small, i'm considering a body swap to something closer to 1/14 scale...
The instructions don't give you much. Part fitment is a little bad.
https://i.imgur.com/3QaH2znh.jpg
Going off the width at cab step, it's around 1/17 scale.
https://i.imgur.com/UBtqbdhh.jpg
https://i.imgur.com/Ryt8vBdh.jpg
The kit comes with a pack of grease, a harness with 2 Led, a motor already hooked to a gearbox, and a servo with a Dragon.
There are a ton of guys out there making 3d printer parts. Bumpers, transfer cases for better motors, rims for better tires, 5th wheels, better scaled parts...
After getting it built up it seems small, i'm considering a body swap to something closer to 1/14 scale...