Kenworth Dump

[Trucker47]

What to do, what to do...

Looking for some input about building a kenworth 3-axle dump like the ones we have up here for the highways dept. See the picture below:

https://lh3.googleusercontent.com/JSdVyhsoFW7UryzQlc6dMXua1zSzml6LRuly_sPC10bzBaoibv ITa5LKRbADZCy692xc2_ayAxIohGcDvO9U0mC06csLRPtB2dgF gLbHSUUfQWKrW9PJmK8TS2lVmmT8RqBu0NbOrfsVahimFzKF1d K1HfA-ed8oe84xd_KTRSOWlc9yXPXPWEBFPNtY1Bn2hmFz_-h0WG0izNC8ngSR6Ow5rn2zvAlzRNPAHYJ96cG2KBepm3QlXmcX mpeGiY5Cf0rEtcaI2Iun-WSi9XXDJs-iyVyW2vyvMIoJhJ8FQQwqhccDKm22IYNST2FcFZ97rfU_SlQSP APX8mIhP9sHDIHYqMf984XOgW3CJMQ9CQNevREoFR8_c0Rn--XUHbhT1HJ-5yms6CZVqKWgWp_H8zHrttfeAHW2gz6VocCAAO82nJWMMuwEik WifaRaN60RlFf8YN7o2bcf-38MWwH13cuVBoO0agaZb0HqQ6QBTHJptOChzlGgKRkPkV8sDeS Sah5T9FZDO_qEo70hb32oKFpeoJjHSyGiAOhOCPZNoyFRswD0x c4Vl9ciajh3chhskm1v1rVXGg2PRezGMAIps22z9dGflxdjMiy 49CGZEj-eWBgCSPn3VqZCOygj10ZdD0oTvKHxW9qu7-4ownItn8P84b9WrV25ljGofj6b6z2inQF9DcFeyOGTZWgaw1mf t47DwJlRkvLLzqRhIvE=w1278-h958-no

I don't have a tonne of free time lately but I have enough to tinker so I thought it would be best to start with a Tamiya kit and go form there. I am wondering which option you guys think would be best before I pull the trigger and order a kit:


1. Grand Hauler - chop off the sleep, add an axle and a dump bed and be one my way. Cab is pretty different from that kenworth though...

2. Knight Hauler - chop off sleeper, extend chassis, add axle and dump bed. I think this will look a little more similiar?

3. Custom chassis build based on one of the above mentioned bodies?

4. Other?

Any other input would be great!! :D

Basically I don't realllly know where to begin. :thinking: Once I've got a selection ill start modelling it all in CAD and design the details :bounce:

EDIT: Forgot to add that I am also pondering making this a hook lift truck, so I can put whatever style if bed on that I would like in the future.

[skeeter]

Me personally, I'd go with the King Hauler.

In my experience the Grand Haulers DON'T have as much articulation in the drive wheels/axles do the KH.

[bigdogrod]

shapeways has a t800 nose. since it looks like you are going to use mostly aftermarket stuff anyway, it might be easier to get a new set of framerails and build from there. if you get it done in cad can you output it to a stl file? i'd trade some parts for a good 3d model