Norwegian Air Force Scania P470CB 4x4

[MortenNo]

This project is from Rygge airport. this airport is under the Norwegian Air Force. the project is intended as 1/14 RC. the airport fire truck has a rescue platform.

Scania P470CB 4x4
year delivered 2008
water tank 4200 liters
foam tank 400 liters
Powder tank 250 kg

have not quite clear to me with the work of this project. is exactly in the start phase. more info to come

http://www.modell-utrykning.com/sites/default/files/inline-images/59171_T_9.1.jpg

[egronvold]

Two RNoAF firetrucks on the forum :D

[Tgrzes]

Nice! Looking forward to another fire apparatus build!

[MortenNo]

This is the second one I plan to build an RC ac ,. also this is stationed at Rygge

http://www.modell-utrykning.com/sites/default/files/inline-images/M6_3.JPG

[MortenNo]

It wil be to more of RNoAF firetrucks. Ward Le frans O-10/11 and Magirus Deutz FLF 24 B-5 150D 10.

[MortenNo]

I go with some fire truck projects in mind. but first I have to land some of them.

and i have this site i am working whit.

http://www.modell-utrykning.com/

[Wombii]

Good to see you aren't afraid of starting big projects. M6 3 is actually the one mine is based on. It helped fight a huge warehouse fire in my home town. Do you know if it's still at Rygge? I read a few years ago they were planning to move it somewhere else for training/education or something.

If you want to save a lot of work, you may want to consider doing one of the trucks without a crew cab. There is an air force painted 4x4 with a standard P-cab stationed at Jan Mayen. Avinor has a lot of P-cab 4x4 and 6x6. There are a couple of really nice 6x6 with rescue platform in Avinor colors with single P-cab in the new fire station at Bodø airport.

[MortenNo]

Then I have set up a project page on the website I run. here I will try to update how the project is going.

http://www.modell-utrykning.com/Prosjekt_scania_P470CB_4_4

[MortenNo]

Good to see you aren't afraid of starting big projects. M6 3 is actually the one mine is based on. It helped fight a huge warehouse fire in my home town. Do you know if it's still at Rygge? I read a few years ago they were planning to move it somewhere else for training/education or something.

If you want to save a lot of work, you may want to consider doing one of the trucks without a crew cab. There is an air force painted 4x4 with a standard P-cab stationed at Jan Mayen. Avinor has a lot of P-cab 4x4 and 6x6. There are a couple of really nice 6x6 with rescue platform in Avinor colors with single P-cab in the new fire station at Bodø airport.

A little hint, I have come across files for Crew cab CP 28. I am in the process of testing printing it. if it is okay, there will be more Norwegian fire trucks with CP 28

[MortenNo]

Her is the first 3d print part of Scania crew cab CP 28. could imagine that it got better. but I have wrongly calculated the cabin. but will look over it to I hope it will be good in the end

http://www.modell-utrykning.com/sites/default/files/inline-images/test%20print%20cp%2028.jpg

[MortenNo]

With good help from Egenes Brannteknikk AS I can start with the first which is a RIV 4600/200 of Scania P470VB 4x4. but I do not get to show drawings due to an agreement. I hope to have the car ready in a few months

[egronvold]

Will be interesting to see the end result!

[MortenNo]

Then the chassis is mounted to see how it turned out. the motor is not attached to the frame. the servo of the steering is not inserted and the small servo of the shafts.


http://www.modell-utrykning.com/sites/default/files/inline-images/first_chassi_2021.jpg

[MortenNo]

it's been a while since I updated my project. here's what it looks like. the body is printed in pla and plastered. these are the first two modules and top to module 1. looks like i will launch the last module for print soon.


http://www.modell-utrykning.com/sites/default/files/inline-images/scania_flyplassbrannbil/work1.jpg

[MortenNo]

New start of this truck.

https://www.modell-utrykning.com/sites/default/files/inline-images/scania_flyplassbrannbil/work_frame.jpg

[jerry56]

new Start..??? what happened...

[frizzen]

Glad to see this one making a comeback.

ARFF trucks are really cool

[MortenNo]

new Start..??? what happened...

first was that I had incorrectly calculated the length of the frame. second was that the position of the shaft was also incorrect. had to do the fire truck body

[MortenNo]

Glad to see this one making a comeback.

ARFF trucks are really cool


her is my home site whit Norwegian emergency vehicles. also ARFF trucks.

http://www.modell-utrykning.com/

[MortenNo]

Her is fire truck. I'm working on the modules and trying to figure out what I do with the crew cab CP28. now there is a R620 scania cabin on it. has also received controller cards for sound and light of the type Rc engine sound ESP32.


https://www.modell-utrykning.com/sites/default/files/inline-images/scania_flyplassbrannbil/crew%20cab.jpg

[MortenNo]

Then I built up the Rc Engine Sound ESP32. now all you have to do is download the software and test it against the Carson FS Reflex Stick Multi Pro LCD 2.4G 14 CH.

https://www.modell-utrykning.com/sites/default/files/inline-images/scania_flyplassbrannbil/kort_bilde2.jpg

https://www.modell-utrykning.com/sites/default/files/inline-images/scania_flyplassbrannbil/kort_bilde1.jpg

[MortenNo]

Here I was, but had to unscrew the entire fire truck from the porch to start over. First is to measure and drill new holes for the axle. Next is the cab plate and the axle and the crossbeams that are 3D printed.

https://www.modell-utrykning.com/sites/default/files/2025-04/scania_buffelo2025.jpg

[Zabco]

Good to see this build again. Hope to see it through to final.

[MortenNo]

Here is the first picture of the front of the fire truck. Haven't started going from R cabin to P and crew cab 28 yet. The colors are RAL 1016 car paint and NATO black vallejo air paint.


https://www.modell-utrykning.com/sites/default/files/2025-05/496006441_2058030368004752_8987237597910249405_n.j pg

[frizzen]

Glad to see your build is making progress again. Those colors should look really sharp on the truck