Komatsu WA470 Wheel Loader

[Turan5561]

Hello guys. I am here with the construction stages of the wheel loader, which I plan to put into mass production. This is a prototype produced to see how it works and to fix some bugs. The construction phase of the prototype was completed and sandblasting was done. tomorrow electrostatic paint will be done and how it will look more or less will be revealed. I present it to your likes, I hope you like it. See you tomorrow

[Turan5561]

I hope I was able to add pictures

[ddmckee54]

Turan5561:

I don't know about anybody else, but I can't see any pictures. You need to use a third-party to host your picture files, then link to them. How did you try posting the pictures?

Don

[jerry56]

Yeah, you have to host them on a third party site like Flickr or something...

[Lil Giants]

I use this photo host site to link pictures to this forum. Simple to use & no Sign Up required.

https://postimages.org/

[Turan5561]

Yeah, you have to host them on a third party site like Flickr or something...

I am sharing for the first time. Thank you for the information you provided.

[Turan5561]

I use this photo host site to link pictures to this forum. Simple to use & no Sign Up required.

https://postimages.org/

I am sharing for the first time. Thank you for the information you provided.

[Turan5561]

https://i.postimg.cc/CzRGHmqK/IMG-20210807-WA0002.jpg (https://postimg.cc/CzRGHmqK)

https://i.postimg.cc/sBsG8cv7/IMG-20210807-WA0003.jpg (https://postimg.cc/sBsG8cv7)

https://i.postimg.cc/75v21D4B/IMG-20210807-WA0004.jpg (https://postimg.cc/75v21D4B)

https://i.postimg.cc/yk3RSxMg/IMG-20210807-WA0005.jpg (https://postimg.cc/yk3RSxMg)

https://i.postimg.cc/2VWqSJWn/IMG-20210807-WA0008.jpg (https://postimg.cc/2VWqSJWn)

https://i.postimg.cc/WF4Fp1m4/IMG-20210807-WA0011.jpg (https://postimg.cc/WF4Fp1m4)

https://i.postimg.cc/yWQhZwW5/IMG-20210807-WA0013.jpg (https://postimg.cc/yWQhZwW5)

https://i.postimg.cc/30RgqZfn/IMG-20210807-WA0014.jpg (https://postimg.cc/30RgqZfn)

https://i.postimg.cc/tZD3Dcks/IMG-20210807-WA0015.jpg (https://postimg.cc/tZD3Dcks)

https://i.postimg.cc/XG259CNF/IMG-20210807-WA0018.jpg (https://postimg.cc/XG259CNF)

https://i.postimg.cc/Lgn1D8hW/IMG-20210807-WA0019.jpg (https://postimg.cc/Lgn1D8hW)

https://i.postimg.cc/xXKbt7T9/IMG-20210807-WA0024.jpg (https://postimg.cc/xXKbt7T9)

https://i.postimg.cc/PNRZxYRn/IMG-20210807-WA0025.jpg (https://postimg.cc/PNRZxYRn)

https://i.postimg.cc/grJ8mN4K/IMG-20210807-WA0026.jpg (https://postimg.cc/grJ8mN4K)

https://i.postimg.cc/mzhkf6Rz/IMG-20210807-WA0027.jpg (https://postimg.cc/mzhkf6Rz)

https://i.postimg.cc/Z9b0j5ML/IMG-20210807-WA0028.jpg (https://postimg.cc/Z9b0j5ML)

https://i.postimg.cc/dDpkvvhq/IMG-20210807-WA0031.jpg (https://postimg.cc/dDpkvvhq)

https://i.postimg.cc/qhBntLr4/IMG-20210809-WA0028.jpg (https://postimg.cc/qhBntLr4)

https://i.postimg.cc/67fn5PDM/IMG-20210809-WA0029.jpg (https://postimg.cc/67fn5PDM)

https://i.postimg.cc/WthFQtbW/IMG-20210810-WA0014.jpg (https://postimg.cc/WthFQtbW)

https://i.postimg.cc/DWx0NKV3/IMG-20210812-WA0032.jpg (https://postimg.cc/DWx0NKV3)

https://i.postimg.cc/qNXz83jR/IMG-20210812-WA0033.jpg (https://postimg.cc/qNXz83jR)

https://i.postimg.cc/jWcnr779/IMG-20210815-WA0005.jpg (https://postimg.cc/jWcnr779)

https://i.postimg.cc/ZvBW3sMt/IMG-20210815-WA0006.jpg (https://postimg.cc/ZvBW3sMt)

https://i.postimg.cc/njwsXfTG/IMG-20210815-WA0007.jpg (https://postimg.cc/njwsXfTG)

https://i.postimg.cc/qtT2rrZt/IMG-20210815-WA0008.jpg (https://postimg.cc/qtT2rrZt)

https://i.postimg.cc/jLBz8PH4/IMG-20210815-WA0009.jpg (https://postimg.cc/jLBz8PH4)

https://i.postimg.cc/FYc0wzG5/IMG-20210815-WA0010.jpg (https://postimg.cc/FYc0wzG5)

[Turan5561]

I finally managed to upload a picture. After sandblasting and electrostatic painting

https://i.postimg.cc/wMyrWQY7/IMG-20210820-WA0007.jpg (https://postimg.cc/dZFn3d1Y)

https://i.postimg.cc/9QG65bR9/IMG-20210820-WA0008.jpg (https://postimg.cc/jDSgyzhq)

https://i.postimg.cc/vBqR2m1S/IMG-20210820-WA0009.jpg (https://postimg.cc/2bZXVr74)

https://i.postimg.cc/65GsztBY/IMG-20210820-WA0010.jpg (https://postimg.cc/QHsndL9T)

https://i.postimg.cc/j2mpKk4H/IMG-20210820-WA0011.jpg (https://postimg.cc/1V0CrBTX)

https://i.postimg.cc/bw9qHpR4/IMG-20210820-WA0012.jpg (https://postimg.cc/jDCVRVmh)

https://i.postimg.cc/sDSjxpGj/IMG-20210820-WA0013.jpg (https://postimg.cc/nCFbw91g)

https://i.postimg.cc/mZKZTdDp/IMG-20210820-WA0014.jpg (https://postimg.cc/mhNWwy77)

https://i.postimg.cc/PJgR0vdK/IMG-20210820-WA0016.jpg (https://postimg.cc/7JN926GT)

https://i.postimg.cc/QNFxGLXW/IMG-20210820-WA0017.jpg (https://postimg.cc/QVrr1yKX)

https://i.postimg.cc/hj3wb3wk/IMG-20210820-WA0018.jpg (https://postimg.cc/34mn3931)

https://i.postimg.cc/QMhRX71y/IMG-20210820-WA0019.jpg (https://postimg.cc/Sn1ZdJZ6)

https://i.postimg.cc/YCc5sZ9k/IMG-20210820-WA0020.jpg (https://postimg.cc/N54CyNmP)

[Turan5561]

Turan5561:

I don't know about anybody else, but I can't see any pictures. You need to use a third-party to host your picture files, then link to them. How did you try posting the pictures?

Don

first post but i finally made it picture

[Azonic]

Nice job, looks great!

[Turan5561]

Nice job, looks great!

thank you my friend, but it will get better

[bigdogrod]

how much for a kit just like it sits in the last pic, doesn't even have to be painted.

[Turan5561]

how much for a kit just like it sits in the last pic, doesn't even have to be painted.

unpainted 500$+ shipping.
but even if there is no paint, it will definitely be sandblasted. This process is necessary for the surface to be clean.

[bigdogrod]

ok, that's not too bad. what are the plans for axles, hydraulics and such? will there be a parts listing of what's needed to complete? that would be awesome for those that like to build.

[Turan5561]

ok, that's not too bad. what are the plans for axles, hydraulics and such? will there be a parts listing of what's needed to complete? that would be awesome for those that like to build.

My plan is ready. Only the outer shell will belong to me. I'm going to import the other parts, I even placed the order and I'm waiting for it to arrive. If I had been busy producing other parts myself, the cost would have increased exponentially. I decided that the best thing to do is to buy ready-made from outside. but if the demand is high, I can produce those parts myself. I have other projects soon, generator is next. My goal is to sell cheap and quality products to people.

[Turan5561]

ok, that's not too bad. what are the plans for axles, hydraulics and such? will there be a parts listing of what's needed to complete? that would be awesome for those that like to build.


I plan to present this tool to people in 3 different ways. only outer shell, shell and axle , rim , tire, ve finally complete ready shell , axle , hydraulic

[bigdogrod]

sounds great, i'm in for one when you are ready

[Turan5561]

sounds great, i'm in for one when you are ready

I am waiting for parts such as axles, hydraulic system. I will try, if nothing goes wrong, I will go to mass production. how do you plan to buy it, is it just the outer shell?

[bigdogrod]

yes i would like just as it sits in the earlier pictures, don't even need paint if that makes price less. i have lesu axles and loader wheels, that i hope will fit. i'm hoping it will be easy to assemble with a some help or a parts list, like how many cylinders and sizes to buy, what axles to buy if not lesu, stuff like that.

[Turan5561]

yes i would like just as it sits in the earlier pictures, don't even need paint if that makes price less. i have lesu axles and loader wheels, that i hope will fit. i'm hoping it will be easy to assemble with a some help or a parts list, like how many cylinders and sizes to buy, what axles to buy if not lesu, stuff like that.

do not worry. I'll supply them all, I just need a little more time

[Turan5561]

complementary products arrived. hydraulic pump, valve, pistons, gearbox, differential, tires and wheels are ready. I got to the assembly stage. but I will make some changes in the project, after the project change there will be a new cutting for production.

https://i.postimg.cc/J0TQ9HFs/IMG-20210920-WA0010.jpg (https://postimg.cc/ctnY3C0W)

https://i.postimg.cc/wvQ2QGcc/IMG-20210920-WA0009.jpg (https://postimg.cc/Q9VcXSzH)

https://i.postimg.cc/CL17bJZk/IMG-20210920-WA0008.jpg (https://postimg.cc/WtB0vGw1)

https://i.postimg.cc/T1297Jt8/IMG-20210920-WA0007.jpg (https://postimg.cc/CBtkdkyJ)

https://i.postimg.cc/Yqs3RggV/IMG-20210920-WA0006.jpg (https://postimg.cc/TpngYKtq)

https://i.postimg.cc/Yqs3RggV/IMG-20210920-WA0006.jpg (https://postimg.cc/TpngYKtq)

https://i.postimg.cc/1RMMgbzy/IMG-20210920-WA0011.jpg (https://postimg.cc/t7ZFwSPc)

https://i.postimg.cc/2SLxK675/IMG-20210920-WA0012.jpg (https://postimg.cc/VJ1MSzTy)