8 car autocarrier [Archive] - RC Truck and Construction

trucklover

01-02-2022, 09:49 PM

Hello again. Does anyone know where I can find an 8 car auto carrier with ramp, two decks where the top deck articulates forming an "arch" where the top car is located? The trailer sits behind the cab. I have been looking for sometime, but for some reason I don't see any in kit form or even custom builds.

frizzen

01-02-2022, 10:30 PM

Not quite sure exactly what you're asking, so here are some i've run across before

I always really liked this custom COE one.
https://youtu.be/fdU2SUTDjmY

And this custom grand hauler one
https://youtu.be/v_vg-w45PQE

I hadn't seen this one yet
https://youtu.be/zVKMvijSfLA

One of the guys near Indiana runs a mighty Tonka car carrier trailer full of die cast cars, should have some pics in meets/shows section

But man that's gonna be a lot of juggling remotes to make it all work to load / unload

trucklover

01-02-2022, 11:33 PM

like this:

trucklover

01-02-2022, 11:44 PM

....and this one.. sorry can't get a larger pic

trucklover

01-02-2022, 11:50 PM

one more time

trucklover

01-03-2022, 01:28 AM

one last try to upload....

Zabco

01-03-2022, 07:22 PM

There is a set of files on Thingiverse for 3d printing and building a car hauler trailer. Looks like it would take a lot of filament and time to print out. Search for thing: 3677802.

skeeter

01-03-2022, 10:55 PM

Do you mind 3D printing one?

There are files on Thingivere.com for one on them. NOT sure if it's 5th wheel mounted or mounted liek the one you seek.

trucklover

01-08-2022, 11:37 PM

thanks Skeeter. Will check that out.

skeeter

04-08-2022, 10:30 AM

thanks Skeeter. Will check that out.

It is 5th wheel mounted, the Thingiverse one. I saw some pictures of one that a PNWSTE member was 3D prinitng. He had went through 3 of the 2.2KG spools of filament to maker er, & STILL wasn't finished with er!

frizzen

04-08-2022, 01:01 PM

Goodisons Mighty-Tonka car carrier with some 1/18 diecast cars chained down.

https://i.imgur.com/t2vMlX8h.jpg

--
And i have learned that the regular pressed steel Car Transporter trailers from Tonka, Nylint, Structo, and Buddy L are too small for 1/14 - 1/16 RC cars. However, i am stubborn. I might be considering something rather abusive with some old Buddy-L, and Tonka stuff